Epa 608 type iii - Study guides, Class notes & Summaries

What date was the sale of CFC's & HCFC's restricted to technicians certified in refrigerant recovery? - Correct answer-November 14, 1994 Section 608 of the Federal Clean Air Act requires technicians to what? - Correct answer-Recover all refrigerants. The objective of the Clean Air Act is to protect what? - Correct answer-The earth's stratosphere. HFC's - Correct answer-HydroFlouroCarbon's CFC's - Correct answer-ChloroFluoroCarbon's ODP - Correct answer-Ozone Depletion Potential Which in...

EPA 608 Type III Exam | Questions and Answers Graded A+ | Latest 2024 EPA 608 Type III Exam | Questions and Answers Graded A+ | Latest 2024 EPA 608 Type III Exam | Questions and Answers Graded A+ | Latest 2024

EPA 608 TYPE III EXAM WITH 150+ QUESTIONS WITH CORRECTRY ANALYZED ANSWERS (ACTUAL EXAM) ALREADY GRADED A+ LATEST 2024

EPA 608 Type III Practice Questions with Approved Answers | Latest 2024/2025

EPA SECTION 608 EXAM (4 VERSIONS) WITH 500 ACTUAL EXAM QUESTIONS AND 100% CORRECT ANSWERS / EPA 608 TECHNICIAN CERTIFICATION REAL EXAM ANSWERS (BRAND NEW!!) Epa Section 608 Type 1 What type of certification is required for persons recovering CFC's, HCFCs, or HFCs during maintenance, service, or repair of small appliances. a. Type II technician. b. Type III technician. c. Type I technician. d. Technician who has passed the core exam. - ANSWER-C EPA Section 608 rules require capture...

EPA 608 LATEST ACTUAL EXAM 2024 VERSION 1 WITH 250 QUESTIONS AND CORRECT ANSWERS (100% CORRECT VERIFIED ANSWERS) WELL ELABORATED QUESTIONS AND ANSWERS (AGRADE) What is EPA 608 Type I certification? - ANSWER-Persons who maintain, service, repair, or dispose of small appliances (containing 5 pounds of refrigerant (or less). What is EPA 608 Type II certification? - ANSWER-Persons who maintain, service, repair, or dispose of high and very high pressure appliances. Except small appliances ...

EPA SECTION 608 TYPE I, II & III LATEST UPDATE 2024 EXAM QUESTIONS AND ANSWERS

EPA SECTION 608 TYPE I, TYPE II , TYPE III Acc What is typically used on small appliances as a service aperture or other device for adding or removing refrigerant? a. A straight piece of tubing that is entered using a piercing access tube. b. A line located 15 inches below the compressor. c. A valve installed at the factory which has a ¼ inch diameter and machine threads. d. A service aperture is not present because small appliances are exempt from this requirement. - ANSWER a. A straight ...

EPA 608 TYPE III 2024 QUESTIONS WITH CORRECT ANSWERS ALREADY PASSED AND VERIFIED Identify the pressure corresponding to 32 degrees F for R-123: ________. a) 23 inches of Hg vacuum b) 20 inches of Hg vacuum c) 17 inches of Hg vacuum d) 11 inches of Hg vacuum - CORRECT ANSWER b) 20 inches of Hg vacuum A hydrostatic tube test kit is used to: _________. a) blow all water from the tubes b) remove any water from the machine c) vent refrigerant d) determine if a tube leaks - CORRECT ANSWER ...

EPA 608 TYPE III 2024 QUESTIONS WITH CORRECT ANSWERS ALREADY PASSED AND VERIFIED Identify the pressure corresponding to 32 degrees F for R-123: ________. a) 23 inches of Hg vacuum b) 20 inches of Hg vacuum c) 17 inches of Hg vacuum d) 11 inches of Hg vacuum - CORRECT ANSWER b) 20 inches of Hg vacuum A hydrostatic tube test kit is used to: _________. a) blow all water from the tubes b) remove any water from the machine c) vent refrigerant d) determine if a tube leaks - CORRECT ANSWER ...