Icc electrical test Study guides, Class notes & Summaries

ICC Electrical Test with Verified Solutions |Latest 2024/2025

ICC Vapor Recovery – VT Exam Questions and Answers 100% Solved Type of sealant you should you use on a Phil-Tite Ball Float nipple:Pipe dope Number of open valves on the clean air separator:One You must be CERTIFIED by Healy to re-connect a Healy breakaway, True or False?False The type of pressure gauge is recommended to test Healy VacSYSA gauge measuring 0-100 WC On new construction, after July 1, 2004, Can you install an in-ground Spill Bucket?YESWhen Piping is monitored and with V...

ICC California UST Service Technician Exam - Questions and Answers A __________ is used when there is not enough slope on the vapor return lines from the dispensers to the tanks. A liquid collection point, vapor pot, or vapor belly pot. (T/F) an automatic tank gauge can fulfill the leak detection requirement in California for what type of tank? Single wall tanks (T/F) between gasoline, jet fuel, kerosene, and diesel. Gasoline is the most hazardous petroleum product. True As of December 31, 200...

ICC Test Questions with All Correct Answers Energized parts operating at a minimum of ________ shall be guarded against accidental contact by people through the use of approved enclosures. - Answer-60 volts Work space in from to f an electrical panel board shall be a minimum of _____ inches in width, but no less than the width of the panel board. - Answer-30 inches Where electrical conductors are to be spliced, terminated or connected to fixtures or devices, a minimum length of _____ i...

If unused mortar stiffens due to hydration of cement, what must you do? - Discard the mortar What minimum time must you wait before caulking or grouting new tiles? - 24-48 Hours How long should you wait before installing tile on a shower pan? - 24 Hours Unstable dry rock, angular gravel, sandy loam, and cohesive soils having compressive strengths greater than 0.5 and less than 1.5 tons/sq ft (tsf), are typical examples of: - Type-B Soils If 65 street lights are fed by a 2275 volt ser...

If unused mortar stiffens due to hydration of cement, what must you do? - Discard the mortar What minimum time must you wait before caulking or grouting new tiles? - 24-48 Hours How long should you wait before installing tile on a shower pan? - 24 Hours Unstable dry rock, angular gravel, sandy loam, and cohesive soils having compressive strengths greater than 0.5 and less than 1.5 tons/sq ft (tsf), are typical examples of: - Type-B Soils If 65 street lights are fed by a 2275-vo...

If unused mortar stiffens due to hydration of cement, what must you do? Discard the mortar What minimum time must you wait before caulking or grouting new tiles? 24-48 Hours How long should you wait before installing tile on a shower pan? 24 Hours Unstable dry rock, angular gravel, sandy loam, and cohesive soils having compressive strengths greater than 0.5 and less than 1.5 tons/sq ft (tsf), are typical examples of: Type-B Soils If 65 street lights are fed by a 2...

NFPA 10 Exam 144 Questions with Verified Answers NFPA 407 - CORRECT ANSWER STANDARD FOR AIRCRAFT FUEL SERVICING NFPA 17 - CORRECT ANSWER STANDARD FOR DRY CHEMICAL EXTINGUISHING SYSTEMS NFPA 17A - CORRECT ANSWER STANDARD FOR WET CHEMICAL EXTINGUISHING SYSTEMS NFPA 18 - CORRECT ANSWER STANDARD ON WETTING AGENTS NFPA 52 - CORRECT ANSWER VEHICULAR FUEL SYSTEMS HIGH PRESSURE CYLINDER - CORRECT ANSWER CONTAINS NITROGEN, COMPRESSED AIR, CARBON DIOXIDE OR OTHER GASES AT A PRESSURE HIGH...

If unused mortar stiffens due to hydration of cement, what must you do? - Discard the mortar What minimum time must you wait before caulking or grouting new tiles? - 24-48 Hours How long should you wait before installing tile on a shower pan? - 24 Hours Unstable dry rock, angular gravel, sandy loam, and cohesive soils having compressive strengths greater than 0.5 and less than 1.5 tons/sq ft (tsf), are typical examples of: - Type-B Soils If 65 street lights are fed by a 2275 volt ser...

ICC AST Installation- Retrofitting Questions and Answers Rated A+ to allow passage between tanks for inspection provide a minimum of? 1/6 of the sum of the adjacent tank diameters, but not less then 3 feet. pressure vacuum vents remain normally closed, only opened when the pressure inside the tank reaches? 2 through 16 ounces per square Inch or a vacuum of 0.5 through 1.0 ounces per square inch. the primary criterion for tank foundation design is the allowable bearing pressure o...