Michigan mechanic - Study guides, Class notes & Summaries

Michigan State Brakes Certification Exam Questions and Answers Most 1995 & newer vehicles use which of the following types of wheels bearings on non-drive wheel? - ANSWER ️️ Sealed non-serviceable to test a vacuum power brake booster in the vehicle, you should pump the brake pedal at least 4 times, hold the brake pedal depressed, and start the engine. the brake pedal should: - ANSWER ️️ drop slightly and remain firm You are installing a set of brake shoe linings that are not the s...

HEAVY TRUCK BRAKES MICHIGAN MECHANIC STUDY GUIDE LATEST UPDATED AN ENGINE BRAKE (JACOBS BRAKE) - ANSWER ️️ A. IS A SELF-ENERGIZING SERVO TYPE. B. IS NORMALLY USED IN PLACE OF A SPRING BRAKE. C. RESTRICTS THE INTAKE PORT AND CAUSES A BUILD UP OF 30-45 LBS OF PRESSURE. D. OPENS THE EXHAUST VALVES NEAR THE TOP OF THE COMPRESSION STROKE TO RELEASE THE COMPRESSED AIR. (CORRECT AWNSER) IN THE SYSTEM SHOWN BELOW, THE PART AT C IS: - ANSWER ️️ A. AN INVERSION VALVE. (POSSIBLE CORRECT A...

ENGINE REPAIR MICHIGAN MECHANIC STUDY GUIDE RATED A+ WHICH OF THE FOLLOWING IS TRUE ABOUT ADJUSTING VALVE TAPPET CLEARANCE A. THE VALVE TAPPET CLEARENCE ON A HIGH MILEAGE EGINE SHOULD BE ADJUSTED TIGHTER THAN SPECIFICATIONS FOR A NEWLY REBUILT ENGINE. B. VALVE TAPPET CLEARANCE SHOULD BE ADJUSTED AT TDC AT THE END OF THE COMPRESSION STROKE. (CORRECT AWNSER) C. VALVE TAPPET CLEARANCE SHOULD BE ADJUSTED AT BDC AT THE END OF THE EXHAUST STROKE. D. NONE OF THE ABOVE. (NOT CORRECT AWNS...

UTOMATIC TRANSMISSIONS MICHIGAN MECHANIC STUDY GUIDE with 100% correct

Heavy Truck Electrical Michigan Mechanic Study Guide Questions And Answers Heavy Truck Electrical Michigan Mechanic Study Guide Questions And Answers

AN ENGINE BRAKE (JACOBS BRAKE) A. IS A SELF-ENERGIZING SERVO TYPE. B. IS NORMALLY USED IN PLACE OF A SPRING BRAKE. C. RESTRICTS THE INTAKE PORT AND CAUSES A BUILD UP OF 30-45 LBS OF PRESSURE. D. OPENS THE EXHAUST VALVES NEAR THE TOP OF THE COMPRESSION STROKE TO RELEASE THE COMPRESSED AIR. (CORRECT AWNSER) IN THE SYSTEM SHOWN BELOW, THE PART AT C IS: A. AN INVERSION VALVE. (POSSIBLE CORRECT AWNSER) B. A SAFETY VALVE. C. A MODULATOR VALVE. (NOT CORRECT AWNSER) D. A RELAY VALVE. ...

Michigan Mechanic Certification- HVAC Latest Update Graded A+ Cooling system leak diagnosis Pressure test or dye test Purpose of a radiator The purpose of the radiator is to dissipate heat that is picked up by coolant in the engine into the air passing through its fins and tubes Symptoms of low coolant Engine overheating and no heat from the HVAC system Purpose of the thermostat The purpose of the thermostat is to trap the coolant in the engine until it reaches it operating temp...

Heavy Truck Steering And Suspension Michigan Mechanic Study Guide Verified Study Questions And Answers Heavy Truck Steering And Suspension Michigan Mechanic Study Guide Verified Study Questions And Answers

ENGINE REPAIR MICHIGAN MECHANIC STUDY GUIDE – Questions And Solutions