Nace cip1 exam Study guides, Class notes & Summaries

NACE CIP1 Exam Sample Questions with Verified Answers| Latest 2023/ 2024 1. You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if ...

NACE CIP Level 1 Practical Exam | Answered A+ Latest 2024 NACE CIP Level 1 Practical Exam | Answered A+ Latest 2024 NACE CIP Level 1 Practical Exam | Answered A+ Latest 2024

NACE CIP 2 Exam| Questions and Verified Answers (2023/ 2024) Q: Disadvantages of Plural component spray over single component spray Answer: higher cost, high volt heaters are required, more qualified operator, more hoses for operator to work with Q: Advantages of Plural component spray over single component spray Answer: Accurate mixing without human element, sprays very thick solvent free materials without thinners & sprays materials with very short pot life. Q: 2 major...

NACE CIP Level 1 Practical Exam Question and answers verified to passNACE CIP Level 1 Practical Exam, CIP Level 1 NACE-CIP1-001 Practice Test Questions NACE SP0188 - correct answer High and Low Voltage Holiday Testing Low-Voltage Holiday Detector - correct answer -Ground is attached directly to substrate. -Sponge saturated with a solution of tap water/wetting agent -Proper mix ratio 1oz/USgal -Proper of speed is 1ft/sec Double Stroke -Used on Coatings up to 20mils -may be used o...

NACE CIP Level 2 Exam (2023 Update) Questions and Verified Answers Q: What does re-enforcing add to a resin? Answer: Strength Q: Some resins used in re-enforced linings: Answer: 1. Polyester 2. Epoxy 3. Vinyl ester Q: Lining Definition Answer: A coating normally in immersion service Q: Thermal spray safety practices Answer: 1. HP rated hoses 2. Never use compressed air to clean work area or clothing 3. Don't use plant air for breathing air Q: Com...

NACE CIP 1 CBT 2023 Exam | Questions with Verified Answers (Newly Updated 2023) Q: When reporting the wet film thickness from a wet film thickness comb/gauge (WFT) you report? Answer: The last tooth that has coating on it. Q: Adding an incorrect solvent to a coating may cause? Answer: Non drying and non curing. Q: You are reviewing the documentation for a tank waiting project and notice there is a conflict between the project specification and the manufacture's product ...

NACE CIP Level 1 Exam Questions and Verified Answers| 100% Correct| (2023/ 2024 Update) Q: Improper atomization of the coating may cause which of the following? (Select all that apply.) Answer: A. Uneven DFT Dry spray C. Overspray Q: High viscosity due to low temperature should be corrected by ? (Select all that apply.) Answer: A. Adding extra thinner (B) Heating the coating Q: One advantage of conventional spray is Answer: A. Applicator control Q: Solvent bor...

NACE CIP 1 CBT 2023 Exam | Questions with Verified Answers Q: Depth of surface profile can be evaluated by several methods: Answer: - ISO comparator - replica tape - digital profile gauge Q: The ISO Comparator grades may be recorded: Answer: Finer-than-fine grade, fine grade, medium grade, coarse grade, coarser than coarse grade Q: The two types of replica tape that are commonly used are: Answer: - coarse (0.8-2.5 mils) - X coarse (1.5 to 4.5 mils) Q: Lis...

NACE CIP Level 1 NACE-CIP1-001 Training Material EXAM QUESTIONS AND ANSWERS 100% CORRECT SOLVED

NACE CIP Level 2 Exam Questions and Verified Answers (2023/ 2024 New Update) Q: Special substrates that have rightly adherent oxide films include Answer: Stainless steel Nickel Tin Cadmium Q: Maintenance coating operations are defined as Answer: Applying coatings over a substrate that has been installed in its final environment and has been placed in service Q: Life cycle of a coating system can be affected by: Answer: steel in question, cost, service atmosphere, ...