Nate heat pump questions - Study guides, Class notes & Summaries

HVAC NATE Heat Pump Exam (Latest 2024/ 2025 Update) 100% Correct Questions and Verified Answers| Grade A Q: What is the absolute pressure at sea level if a gauge pressure is 35 psig? Answer: 49.7psia Q: 100,000 BTUH output furnace. Return air temp is 65F. Supply air is 135F. What is the CFM? Answer: 1323CFM Q: What is the best method of repair when a residential supply diffuser is noisy because of a loose vane? Answer: Replace the diffuser. Q: When...

HVAC NATE Heat Pump Questions with 100% Correct Answers | Latest Version 2024/2025 | Expert Verified | Ace the Test

HVAC NATE Heat Pump Questions and Answers Graded A+ | latest Update

Charging a heat pump with refrigerant is best accomplished in the _______ mode. A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER B: Cooling mode Heat pumps can provide both heating in the winter and cooling in the summer. In which mode is the heat pump more efficient? A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER A: Heating mode Which of the following components is exclusive t...

HVAC NATE HEAT PUMP QUESTIONS AND ANSWERS 2024

HVAC NATE Heat Pump Questions and answers | Latest 2024/25

On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? 6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? Excessive ice can build up on the bottom of the coil and can redu...

HVAC NATE Heat Pump questions and answers 100% verified. On vvan vR-22 vsystem, vline vdiameters vand vlengths vare vtypically vspecified vfor va vvapor vpressure vdrop vthat vdoes vnot vexceed vwhat? v- v vcorrect vanswer. v v v6-7PSI vor v6F What vis vthe vprimary vpurpose vof vusing vflux vwhen vsoldering vcopper vor vbrass vparts? v- v vcorrect vanswer. v v vPrevent vOxidation The vwater vthat vresults vfrom va vdefrost vcycle vof van vair vto vair vheat vpump(runoff) vmust? v- ...

On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? CORRECT ANSWER 6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? CORRECT ANSWER Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? CORRECT ANSWER Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? CORRECT ANSWER Exc...

NATE Heat Pump questions and answers 100% verified. R-22 mvapor mline mdiameters mand mlengths mare mtypically mspecified mfor ma mvapor mpressure mdrop mthat mdoes mnot mexceed... m- m mcorrect manswer. m m m6-7 mpsi mor m6°F The mprimary mpurpose mof musing mflux mwhen msoldering mcopper mor mbrass mparts mis mto... m- m mcorrect manswer. m m mPrevent moxidation The mwater mthat mresults mfrom ma mdefrost mcycle mof man mair mto mair mheat mpump m(runoff) mmust mdrain moff ma...