Nfpa 70e stuvia 2024 - Study guides, Class notes & Summaries

Accessible (as applied to equipment) - ANSWER Admitting close approach; not guarded by locked doors, elevation, or other effective means Accessible (as applied to wiring methods) - ANSWER Capable of being removed or exposed without damaging the building structure or finish or not permanently closed in by the structure or finish of the building Accessible, Readily (Readily Accessible) - ANSWER Capable of being reached quickly for operation, renewal, or inspections without requiting those to...

ATPV - ANSWER Arc Thermal Performance Value-The incident energy (cal/cm^2) on a material or a multilayer system of materials that results in a 50 percent probability that sufficient heat transfer through the tested specimen is predicted to cause the onset of a second degree skin burn injury based on the Stoll curve (Definition taken from ASTM F1959/F1959M) Cal/cm^2 - ANSWER Calories per square centimeter Electrically Safe Work Condition - ANSWER When the power has been turned off Arc Fl...

The OCPD that is protecting the downstream equipment - ANSWER The term "protecting-OCPD" best describes which one of the following? True - ANSWER The arc flash hazard created during an arc flash event is directly dependent on the OCPD that is protecting the downstream equipment where the arcing fault occurs. IEEE 1584 - ANSWER The most commonly used means to calculate incident energy discussed is ? . safely - ANSWER After a circuit is deenergized by the automatic operation of a circui...

What are the guidelines for using CPR on a shock victim? - ANSWER Begin CPR as soon as possible after de-energizing the source of shock Continue CPR until medical assistance arrives Secure the accident scene Don't delay rescue procedures On which three topics are unqualified workers required to receive training under NFPA 70E? - ANSWER Any relevant electrical safety work practices not covered by the NFPA 70E standard Procedures for protecting them from relevant electrical hazards...

What are the guidelines for using CPR on a shock victim? - ANSWER Begin CPR as soon as possible after de-energizing the source of shock Continue CPR until medical assistance arrives Secure the accident scene Don't delay rescue procedures On which three topics are unqualified workers required to receive training under NFPA 70E? - ANSWER Any relevant electrical safety work practices not covered by the NFPA 70E standard Procedures for protecting them from relevant electrical hazards...