Oil burner components - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

FULL NHIE EXAM PRACTICE - Questions and Answers (Complete Solutions) Where you have found evidence of footing settlement, how can you predict whether there will be further settlement? (a) You can count the number of planes of movement. (b) You can determine the type of foundation material. (c) You cannot predict settlement from a single inspection. (d) You can determine the depth of the footing. You typically identify a Freon leak (a) As an oil stain (b) As refrigerant coming out of the Freon ...

Burner Blower correct answersThis component has a squirrel cage design and provides a way to regulate the amount of air entering the blower. It forces air in the combustion chamber through the air tube where it gets mixed with atomized oil for combustion purposes. Too little air in the combustion area would cause poor combustion, so the blower must be cleaned periodically. Burner Motor correct answersThis component is responsible for applying rotational force to the blower and the fuel pump o...

Oil Burner Motor - ANSWER-Drives the blower wheel and fuel pump by means of a shaft coupling, spins at 3600rpms Squirrel Cage - ANSWER-Cylinder shaped fan assembly used to move air Coupling - ANSWER-A device for joining 2 fluid-flow lines Oil Pump - ANSWER-Transfers oil from the supply tank, increases pump pressure to 100/140 psig Cad Cell - ANSWER-A device containing cadmium sulfide used to prove the flame in an oil-burning furnace Transformer/igniter - ANSWER-Increases voltage 1...

Oil burner components

OIL BURNER COMPONENTS ID EXAM QUESTIONS WITH CORRECT ANSWERS GRADED A+ 100% 2024

HVACR UNIT 55 QUESTIONS AND ANSWERS ALREADY PASSED A major difference between the operation of an oil furnace and a gas furnace is that: The oil must be atomized before ignition. An oil furnace heat exchanger is built: Like a drum. How are oil burner nozzles rated? Cone shape, spray angle, and GPH Modern residential oil furnaces sense the flames using: A cadmium sulfide cell. Sealed combustion oil furnaces use: High static oil burners. Select the functions that the primary co...

Oil Burner Components ID Questions And Answers With Verified Solutions With Verified Solutions Already Passed!!!

Oil Burner Components Questions And Answers With Verified Solutions Already Passed!!!

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements appl...

Squirrel Cage - ANSWER-Cylinder shaped fan assembly used to move air Coupling - ANSWER-A device for joining 2 fluid-flow lines Oil Pump - ANSWER-Transfers oil from the supply tank, increases pump pressure to 100/140 psig Cad Cell - ANSWER-A device containing cadmium sulfide used to prove the flame in an oil-burning furnace Transformer/igniter - ANSWER-Increases voltage 10,000/20,000v Electrodes - ANSWER-Carry high voltage to the nozzle Nozzle - ANSWER-Atomizes the oil at the po...