Open head drum Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

Types of prevention - answer-primary- car restraints, bicycle helmets, immunizations secondary- prevent for those with RF-pap, mammo tertiary-mgmt of established disease- meds, lifestyle Primary - answer-Preventing the health problem, most cost effective form of healthcare **IMMUNIZATIONS, ensuring adequate illumination at home (preventing falls) Secondary - answer-Detecting disease in early asymptomatic stages, screenings -Early cause finding of asymptomatic disease via the use of a sc...

ASE Brakes A5 Test (Exam 1, 2, 3) Questions with 100% Correct Answers | Latest 2023/2024 A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast -- A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibration can cause the drum to bounce on the cutting tip and make a chattering noise A veh...

ICT13 Assignment 11: Assessment 11 • 10% of Final Mark • Lab 1: Creating a Webpage for Strike a Chord page 389 + 452 + 500 • Unique number –  • Due date – 2023/08/21 • Time - 23:00 You work for a local music lesson company called Strike a Chord that provides music lessons for piano, guitar, and violin. The company needs a web presence and has hired you to create their website. You have already developed a responsive web design website and now need to integrate additional ...

What BEST describes the effect on the patient if you continue to lower a hearing instrument's kneepoint and increase the compression ratio? Choose ALL that apply. A. a lot of gain for soft sounds B. very few speech cues in a crowded party C. little or no gain for moderately loud sounds D. too much amplification in a crowded party - ANSWER-A,B, & C What frequencies would be MOST affected by a head cold? - ANSWER-Low frequencies. 250,500 What is found on the bottom of the ear canal? - ...

TEEX HAZMAT TECH PROBOARD EXAM 2024 TEEX HAZMAT TECH PROBOARD EXAM 2024|VERIFIED|GUARANTEED WITH ACCURATE ANSWERS Bags - Accurate AnswerUp to 100 pounds although large tote bags contain up to 500 pounds. Hazard classes 1, 4, 5, 6, 8, 9. Carboys - Accurate AnswerDo not exceed 20 gallons. Glass or plastic bottles encased in polystyrene, wooden boxes, plywood drums. Hazard classes 1, 3, 5, 6, 8, 9. Cylinders - Accurate AnswerDo not exceed 1000 pounds of water capacity. Internal pressur...

How do you determine if a boiler has sufficient safety valve capacity - Answer-The accumulation test determines if the valve will discharge all the steam pressure, without allowing the pressure to rise more than 6% more than valve setpoint If a safety valve opens at 100 psi, what pressure should it close at? What requirements governors safety valve blowdowns? - Answer-A: 96-98 psi, with no chatter, with a blowdown of no more than 4 psi of set pressure. A safety valve is limited to how many...

(Proboard) HazMat Technician Training Module 1 Questions and Answers 100% Pass HazMat tech is - Correct Answer ️️ -an individual who responds to incidents using a risk-based response The initial survey is comprised of? - Correct Answer ️️ -Identifying containers, container markings, and detecting unknown materials. Container shapes and markings indicate? - Correct Answer ️️ -The contents of the container. Container shapes are categorized as: - Correct Answer ️️ -Non-bulk...

Which tool combines an axe, a pick, and a claw? a. halligan bar b. pick-head axe c. ram bar d. clemens - a. halligan bar Which kind of steel has been specially treated to resist cutting by normal means? a. case hardening b. alloy c. ductile d. tempered - a. case hardening What must be done prior to making forcible entry into a fire building? a. utilities must be controlled b. an "all clear" must be declared c. the fire attack team must be ready d. ventilation must be established ...

TEEX Hazmat Tech Proboard Question and answers rated A+2023/2024Bags - correct answer Up to 100 pounds although large tote bags contain up to 500 pounds. Hazard classes 1, 4, 5, 6, 8, 9 Carboys - correct answer Do not exceed 20 gallons. Glass or plastic bottles encased in polystyrene, wooden boxes, plywood drums. Hazard classes 1, 3, 5, 6, 8, 9. Cylinders - correct answer Do not exceed 1000 pounds of water capacity. Internal pressures range few psi - several thousand psi. Hazar...

Plant Operations BOMA Pre-Quiz 1-100 Complete Answers 10 psig is equal to: a. -4.7 psia b. 14.7 psia c. 24.7 psia d. 29.4 psia ️c. 24.7 psia A cushioned check valve is used for: a. a safety valve b. an automatic non-return valve c. a pressure relief valve d. A and C ️b. an automatic non-return valve A deaerator tank 10 feet high has how much head pressure? a. .433 psig b. 4.33 psig c. 43.3 psig d. 10 psig ️b. 4.33 psig A draft gauges measure: a. PSIG b. ...