Ospf router - Study guides, Class notes & Summaries

CompTIA Network+ Study Guide: Exam N10-009 (Sybex Study Guide) 6th Edition 2024 with complete solution Table of Contents 1. Cover 2. Table of Contents 3. Title Page 4. Copyright 5. Acknowledgments 6. About the Authors 7. About the Technical Editor 8. Table of Exercises 9. Introduction 1. What Is the Network+ Certification? 2. Why Become Network+ Certified? 3. How to Become Network+ Certified 4. Tips for Taking the Network+ Exam 5. Who Should Read This Book? 6. What Does This Bo...

FDM - Shares communication channel by allowing full-time access to only part of the communication channel for each circuit TDM - shares communication channel by allowing the entire channel to be used by different circuits, one per each time slot guided media technology - uses wires, fibers, or other similar mechanisms to send and receive signals circuit switched networks - maintains the reserved resources for the entire duration of the communication, whether they are used to the fullest c...

ABR's connected over virtual links send all OSPF message types as what to it's neighbor/destination? - The ABR will send its OSPF message types as unicast IP packets to the IP address of the destination router. However, the key take away is that the destination of the virtual link, to form that neighborship, is via the RID of that router noted within the shared Type-1 Router LSA. ABR's create one Type-1 LSA per area. T/F? - T Each router uses it's own what as its LSID? - OSPF enabled r...

What is the IEEE of Bluetooth? 802.15 WPAN What is WiMAX and it IEEE? -Worldwide Interoperability for Microwave Access -IEEE 802.16 WWAN In cellular broadband there are two types of cellular networks, what are they? Global System for Mobile (GSM) and Code Division Multiple Access (CDMA). GSM is internationally recognized, while CDMA is primarily used in the US. Typically, it is used by rural homeowners and businesses where cable and DSL are not available. It is usually more expensive and...

A network engineer has manually configured the hello interval to 15 seconds on an interface of a router that is running OSPFv2. By default, how will the dead interval on the interface be affected? The dead interval will not change from the default value. The dead interval will now be 30 seconds. The dead interval will now be 60 seconds. The dead interval will now be 15 seconds. - The dead interval will now be 60 seconds. A network technician issues the following commands when configuring a...

adjacencies formula - For any number of routers (designated as n) on a multiaccess network, there are n (n - 1) / 2 adjacencies. adjust interface bandwidth - #int s0/0/0 #bandwidth [kb] Advertising and enabling OSPF - V2: (config)# router ospf [process-id] # network [network ip] [wildcard mask] area {0} # passive-interface {g0/0} # default-information originate (used with default route) # auto-cost reference-bandwidth [Mb] V3: (conofig)# ipv6 router ospf [process-id] #passive-interfa...

A frame enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? - Input erros CRC A router located between an OSPF routing domain and a non-OSPF routing network is called what? - autonomous system boundary router (ASBR) A__________ route is a route that matches all packets. Commonly called quad zero route, uses 0.0.0.0 0.0.0.0 - default AD of directly connected routing - 0 AD of External EIGRP - 170 AD of internal EIGRP - 90 AD of IS-IS? - 115 AD ...

A. displaying OSPF-related interface information What is the purpose of the show ip ospf interface command? A. displaying OSPF-related interface information B. displaying general information about OSPF routing processes C. displaying OSPF neighbor information on a per-interface basis D. displaying OSPF neighbor information on a per-interface-type basis C. It divides a reference bandwidth of 100 Mbps by the actual bandwidth of the existing interface to calculate the router with the lowest...

[110/1446] What are these numbers? - 110 is the administrator distance 1446 is the cost A network associate has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0 After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? - FastEthernet0 /1 Serial0/0 Serial0/1.102 Assuming ...

Advanced OSPF Ch 9: Questions and Answers 100% Solved True or false: A router with an interface associated with Area 1 and Area 2 will be able to inject routes learned from one area into another area. a. True b. False Correct answer b. False True or false: A member router contains a complete copy of the LSDBs for every area in the routing domain. a. True b. False Correct answer b. False How many OSPF link-state announcement (LSA) types are used for routing traditional IPv4 packet...