Pipefitter test 1 - Study guides, Class notes & Summaries

Pipefitter Test 1 2024 Exam Update When cutting a 30" diameter cast iron pipe, it is BEST to use a(n) - ANSWER-diamond point chiself Of the following materials, the one which is BEST suited for yarning bell and spigot joints on water pipe is - ANSWER-sterilized yarn A valve that is used between low pressure and high pressure areas in water distribution systems is called a boundary valve - ANSWER- Cast iron pipe is particularly adapted to underground and submerged service because of its - ...

Pipefitter Test 1 Questions with Correct Answers

Pipefitter Test 1 Questions And Answers With Latest Solutions Of the following methods of installing a pipe in a trench, the one which is MOST acceptable is to ANS Use a flat bottom trench and backfill tamped When cutting a 30" diameter cast iron pipe, it is BEST to use a(n) ANS diamond point chiself Of the following materials, the one which is BEST suited for yarning bell and spigot joints on water pipe is ANS sterilized yarn A valve that is used between low pressure and high pr...

Pipefitter NCCER Test Questions with Correct Answers Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 - Correct Answer B Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) Independently D) Off the pump discharge - Correct Answer C What is used when lighting a cutting torch ? A) Striker B) Cigarette lighter C) Match D) Any open flame - Correct Answer A Where is specific information needed to install piping and a...

©BRAINBARTER 2024/2025 Pipefitter NCCER Test Exam Questions With 100% Verified Answers. Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 - answerB Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) Independently D) Off the pump discharge - answerC What is used when lighting a cutting torch ? A) Striker B) Cigarette lighter C) Match D) Any open flame - answerA Where is specific information needed to install piping ...

PIPEFITTER NCCER TEST | 118 EXAM WITH NGN QUESTIONS AND OMPLETE WELL EXPLAINED ANSWERS WITH RATIONALE 100% CORRECT VERIFIED BY EXPERTS AND GRADED A+ LATEST UPDATE 2024[ALREADY PASSED] Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 B Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) Independently D) Off the pump discharge C What is used when lighting a cutting torch ? A) Striker B) Cigarette lighter C) Match D) Any ...

Pipefitter NCCER Test Exam 2024 Expected Questions and Answers (Verified by Expert) Pipefitter NCCER Test Exam 2024 Expected Questions and Answers (Verified by Expert) Pipefitter NCCER Test Exam 2024 Expected Questions and Answers (Verified by Expert) Pipefitter NCCER Test Expected Questions and Answers 1. Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 (ANSWER) B 2. Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) In...

Pipefitter Test Part II Questions And Answers With Latest Updates The two types of scaffolds used by pipefitters is the tubular buck and: ANS pole What is the take-out for a 10" long radius 45 degree elbow? ANS 6 & 1/4" According to OSHA, while working in an excavation, what is the MAXIMUM distance that a worker can be from a ladder? ANS 25 ft Which of the following types of copper tubing has the thickest wall? ANS K Arm extended, hand closed, thumb pointing upward signals...

Pipefitter Test Part II Questions with Correct Answers The two types of scaffolds used by pipefitters is the tubular buck and: - Correct Answer pole What is the take-out for a 10" long radius 45 degree elbow? - Correct Answer 6 & 1/4" According to OSHA, while working in an excavation, what is the MAXIMUM distance that a worker can be from a ladder? - Correct Answer 25 ft Which of the following types of copper tubing has the thickest wall? - Correct Answer K Arm extended, hand clos...