Pumper test 3 - Study guides, Class notes & Summaries

Fire Inspector 2 Questions and Answers 100% Solved Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hyd...

S12 SPRINKLER TEST, S13 STANDPIPE TEST, SPRINKLERS WITH ALL 400 QUESTIONS AND VERIFIED CORRECT ANSWERS NEWEST TOP VERSION WITH PROFESSIONALS EVALUATION|NEW AND ADVANCED fire pump - ANSWER- a provider of liquid flow and pressure dedicated to fire protection. A fire pump is a part of a fire sprinklers system water supply and can be powered by electric, diesel or steam. connected to public water source or tank. provides higher pressure to sprinkler system Glass bulb sprinkler - ANSWER- op...

Pumper-Operator Questions and Answers Graded A+ When was the first hand pump invented 1720, by Richard Newsham Where was the first wooden water mains for firefighting Philadelphia, early 1800s What were the first mechanized fire pumps fueled by Coal When was the first gas powered apparatus 1900 When was triple combination pumper created 1906 Apparatus safety standards NFPA 1901 -standards for fire apparatus NFPA 1500 - health safety for firefighters ...

Pumper Test 3

Minimum water supply for a class 1 or 3 standpipe system is _____ gpm for at least 30mn with 65psi residual pressure at the highest outlet. - ️️500 When liquid propane gas is stored in the same area as flammable or combustible liquid, the containers must be at least ______ feet apart - ️️20 feet Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - ️️20psi A fire pump serving a st...

Pumper Test 3

HazMat Tech Course (Review Challenge). Questions and answers. 100% Accurate. Revision Guide. The "outcomes" of a HazMat incident are defined in terms of - -fatalities, injuries, property and environmental damage, and systems disruption During a leak incident, what resource would you use to locate nearby streams? - -Topographic map During a leak incident, what resource would you use to locate access routes and isolation control points for responders? - -Road map During a leak inci...

1. Fire protection engineers have established PSI as a minimum re- quired residual pressure when computing the available water for flow test results. ANS 20psi 2. The most common gallonage rating for horizontal shaft pumps in use today are - GPM. ANS 500 - 1500 gpm 3. A fire pump serving a standpipe system should be tested ANS weekly 4. A fire department pumper can effectively supply around feet in a high rise building depending on hydrant pressure and other factors. ANS 450 feet 5. Cla...