Surfacing material - Study guides, Class notes & Summaries

S-290 Final Exam Questions and Answers Already Passed T/F Topography can directly and indirectly affect fuels and their availability for combustion. True Of the three primary environmental factors that influence fire behavior, which is the least variable? Topography The least critical form of heat transfer that influences rate of spread in a running wild land fire is: Conduction The point to which a combustible material must be heated to produce self-sustaining combustion is known as the: Ig...

40 hr. Asbestos Contractor-Supervisor Course Questions and Answers 2024 ACM asbestos containing material PACM presumed asbestos containing material RACM regulated asbestos containing material ACBM Asbestos Containing Building Material size of asbestos fiber 0.3-0.8 microns PLM Polarized Light Microscopy (method for testing PACM) Material is considered asbestos containing when it has ______% asbestos >1 Friable able to be crumbled to a ...

CSST Exam Study Prep (Review in progress... again. 12/3/18) Questions meant to assist in studying for the California OSHA Division of Occupational Safety Health certified site surveillance technician (CSST) Exam 2024 Why was asbestos added to construction materials ? -Answer-It was a great insulator and binder. It added strength and durability against weathering and use. It was non-corrosive, did not conduct electricity, and made spray-on products easier to apply. What are the two classes ...

A weld having a triangular cross section which is applied to a T-joint, corner joint or lap joint is called a A) Butt B) T C) Fillet D) corner - Answer C) fillet A weld produced by filling an elongated hole in an overlapping member, fusing it to the member beneath is called a A) Flange weld B) spot weld C) seam weld D) slot weld - Answer D) slot weld True or False/ a fillet is a type of weld joint? - Answer False---- Butt T and Corners are weld joints A weld used to build up thin sur...

Asbestos Contractor/Supervisor Training Questions & Correct Solutions Chrysotile - ANSWER The only asbestos mineral found in the serpentine group and the most common in the USA at 90-95%. "White Asbestos" Amosite - ANSWER Second most likely found asbestos. "Brown Asbestos" 5-10% Crocidolite - ANSWER "Blue Asbestos" 1-5% Actinolite - ANSWER Can be in vermiculite (often associated with Tremolite) no current production. Tremolite - ANSWER Can be in Vermiculite. Some current ...

Asbestos Project Monitor Examination Questions Answered Correctly| Already Passed What is Surfactant? - ANSWER A chemical that reduces the surface tension of water Class 1 Asbestos Project - ANSWER Removal of TSI & Surfacing How do you find the Maximum Use of Concentration? MUC/MUL - ANSWER PEL x PF = MUC What is the sequence for Phase 2 work area preparation? - ANSWER 1. Set up signs 2.Build the worker Decon unit 3.Preparation of the regulated abatement work area 4. (NYS o...

To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - Correct answer-provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on - Correct answer-a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material - Correct answer-Critical height must equal or exceed fall height 4. When evaluating the structural integrity of a s...

S-290 Final Exam A Questions and Answers Already Passed T/F Topography can directly and indirectly affect fuels and their availability for combustion? True Of the three primary environmental factors that influence fire behavior, which is the least variable? Topography The least critical form of heat transfer that influences rate of spread in a running wild land fire is: Conduction The point to which a combustible material must be heated to produce self sustaining combustion is known as the: ...

The lifting lines should be as vertical as possible - ANSWER ☑☑When using a crane to lift a 12,000-gallon tank out of the excavation, what is the preferable position of the rigging lines attached to the tank's lifting eyes? A. One lifting line should be horizontal B. The lifting lines should be as far apart as possibles C. The lifting lines should be as horizontal as possible D. The lifting lines should be as vertical as possible Material that contains more than 1% asbestos - AN...

Certified Playground Safety Inspector CPSI Sample Exam Questions 2024/25 To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - ANSWER provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on - ANSWER a partially bounded opening 3. Which of the following is correct regarding the i...