Typical oil burner - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

FULL NHIE EXAM PRACTICE - Questions and Answers (Complete Solutions) Where you have found evidence of footing settlement, how can you predict whether there will be further settlement? (a) You can count the number of planes of movement. (b) You can determine the type of foundation material. (c) You cannot predict settlement from a single inspection. (d) You can determine the depth of the footing. You typically identify a Freon leak (a) As an oil stain (b) As refrigerant coming out of the Freon ...

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

What are the 3 funtions of an Oil Burner nozzle? - Answer- Atomize, Meter, Patter. What are the 2 voltage circuits of a primary control? - Answer- Line & Low. What is the function of a fuse? - Answer- Protect circuit. What is the High Limit cut out? - Answer- Max safe Temp or Pressure setting. What is the High Limit cut in? - Answer- Cut out minus Differential. What is the "Max" Lockout time for a burner with a 3 GPH Flow Rate? - Answer- 45 Seconds. What is the minimum stack ...

In a typical oil burner, the motor drives: - Answer Both the fuel unit and the fan The key final adjustment for most oil burners is: - Answer Combustion air High static air pressure burners: - Answer Enable boilers and furnaces to have tighter more efficient heat exchanger passages Dirt or lint build-up on the burnerfan blades will: - Answer Reduce the amount of combustion air One gallon of #2 oil contains approximately: - Answer 140,000 BTU's All petroleum products are...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answer- 300-1000 ohms If a pump is used to bring oil to a l...

Oil burner License Study Guide (Massachusetts) Questions and Answers Already Passed What are the 3 funtions of an Oil Burner nozzle? Atomize, Meter, Patter. What are the 2 voltage circuits of a primary control? Line & Low. What is the function of a fuse? Protect circuit. What is the High Limit cut out? Max safe Temp or Pressure setting. What is the High Limit cut in? Cut out minus Differential. What is the "Max" Lockout time for a burner with a 3 GPH Flow Rate? 45 Secon...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - A...

MASSACHUSETTS OIL BURNER LICENSE EXAM QUESTIONS WITH CORRECT ANSWERS | LATEST UPDATE 2024/2025 | GRADED A+. What are the 3 funtions of an Oil Burner nozzle? - correct answer Atomize, Meter, Patter. What are the 2 voltage circuits of a primary control? - correct answer Line & Low. What is the function of a fuse? - correct answer Protect circuit. What is the High Limit cut out? - correct answer Max safe Temp or Pressure setting. What is the High Limit cut in? - correct answer Cut out minus Dif...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - A...

NORA REVIEW LATEST UPDATE GRADED A+ In a typical oil burner, the motor drives: Both the fuel unit and the fan The key final adjustment for most oil burners is: Combustion air High static air pressure burners: Enable boilers and furnaces to have tighter more efficient heat exchanger passages Dirt or lint build-up on the burnerfan blades will: Reduce the amount of combustion air One gallon of #2 oil contains approximately: 140,000 BTU's All petroleum products are chemical co...