Water tube boiler - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

MN Boiler License Questions With Complete Solutions Graded A+ a question an answer what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's c) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high a) Necessary to burn the combustible gases when ...

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a boiler is produci...

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a boiler is produci...

Lost motion in a duplex direct acting boiler feed pump: a. Is necessary b. Should be avoided c. Is due to wear on the tappets and callas. - ANSWER a. Is necessary A scotch marine boiler is: a. Horizontal fire tube boiler b. Vertical fire tube boiler c. Water tube boiler - ANSWER a. Horizontal fire tube boiler Lead is the amount the valve is open when the: a. Crank is on dead center b. Valve is midway on its stroke c. Eccentric is exactly 90 degrees ahead of the crank - ANSWER a. C...

What is a return tubular boiler? correct answer: A return tubular boiler - the products of combusting passing through the tubes while the water surrounds the tubes. What is a water tube boiler? correct answer: A water tube boiler - water inside the tubes while the production of combustion passes around the tubes. How is the head of a B&W boiler stayed? correct answer: There are no stays Why are the tubes on a Sterling Boiler bent? correct answer: So they can enter the drum radially....

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a b...

MD Stationary Engineer Practice Questions and Answers Latest Updated 2024/2025 (100% Correct) Gases of Combustion that cool on Contact with the boiler heating Surface before combushion is completed Cause a(n) _________ - Answer Formation of soot and smoke In the event of a flame failure, the programmer will______ - Answer Secure the fuel, purge the firebox, and then shut down Boil the water must be conditioned to prevent ______ (3 Answers) - Answer Formation of scale, oxygen pitting, carry...

Illinois State Plumbing Exam with Correct Answers Chemical substance that does not allow oxides to form on freshly cleaned copper before soldering or brazing. - ANS ️️ Flux Where is an escutcheon ring used? - ANS ️️ The outside of the stub out pipe A waste pipe that discharges into and through an approved open connection. - ANS ️️ Indirect Waste Pipe Which 2 parts of a trap are used to measure the depth of the trap seal? - ANS ️️ The crown weir and the top of the dip of th...

I. Types of Boilers 10% of Examination - Answer - High and low pressure fire tube, water tube, cast iron and electric boilers; package boilers II. Basic Principles and Units 12% of Examinatio - Answer - Steam boilers, fittings & accessories, feed water systems, fuel systems, draft systems, steam systems III. Water and Steam Properties 7% of Examination - Answer -Steam action, feedwater & steam accessories, boiler water treatment, steam & water residue IV. Combustion Principles 12%...