Woodshop test questions Study guides, Class notes & Summaries

never grab the ___________ to up tighten the bit when changing ~ sandpaper used to sand straight or curved edges on your board ~ belt sander always run the _______ system when using sanders ~ vacuum only sand on the ______ side of the sander, never the backside ~ front the size of a belt sander is determined by the size of its _____. ours happens to be _____ inch belt ~ belt, 6x80 always be careful to keep ______ away from the belt or spindle. also watch out for your fingers _...

A blade will ____ if forced to cut too fast ~ Break Turn the switch off immediately when a blade ~ Binds or bends The radial arm saw is not used for ~ Ripping Wood should be held solidly against the ~ Fence When crosscutting bowed lumber, keep the crown to the face and down on the pavement to prevent ~ Bucking Before changing cutters or changing the clearance of the cutter, disconnect the ~ Power Ask the instructor to approve any changes in ~ Set up The guide must hold the...

Woodshop Test Questions & Answers Verified 100% Correct!!

Woodshop Test Questions and Answers

Woodshop Test Questions With Correct Answers.

Woodshop Test Questions With 100% Correct Answers Safety instructions must be given before allowed to work/operate on any machine or Tool You're not permitted to work on any equipment/machine if the instructor is not Present Guards and safety devices must be on all machines during Operation Machinery must not be oiled or adjusted while in Use A machine must be started and stopped only by the Operator Do not leave a machine while it is Running When working on or near any machine or ...

Woodshop Test Questions and Answers Rated A+

Woodshop test questions well answered to pass

Woodshop Test Questions and Answers