Academicmaterials
On this page, you find all documents, package deals, and flashcards offered by seller ACADEMICMATERIALS.
- 8975
- 0
- 822
Community
- Followers
- Following
42 Reviews received
9811 items
Millwright Interprovincial (Red Seal) Review Exam 3 Questions And Answers Already Graded A+
Which of the following is true with respect to using oil as lubrication? A) It is more convenient to retain B) It contains contaminants C) It carries away heat D) Cannot permit high speeds - Answer-C) It carries away heat Which of the following best describes an axial labyrinth seal? A) It can only tolerate very limited axial and radial movements B) It is the simplest and cheapest C) It does not alter widths of gaps allowing them to be very small - Answer-C) it does not alter widths of ...
- Package deal
- Exam (elaborations)
- • 10 pages •
Which of the following is true with respect to using oil as lubrication? A) It is more convenient to retain B) It contains contaminants C) It carries away heat D) Cannot permit high speeds - Answer-C) It carries away heat Which of the following best describes an axial labyrinth seal? A) It can only tolerate very limited axial and radial movements B) It is the simplest and cheapest C) It does not alter widths of gaps allowing them to be very small - Answer-C) it does not alter widths of ...
Chain drives - level 2 millwright Updated Exam Questions and Answers Fully Solved 100%
_______ links have two bushings that are press fit into two roller link plates and links have two rollers that spin freely on the bushings - Answer-Roller What is the pitch in roller chain? - Answer-Distance between centres of adjacent joint members What is the chain width in roller chain? - Answer-The minimum distance between link plates and it's 5/8 of the pitch What is roller diameter in roller chain? - Answer-Outside diameter of roller and 5/8 of the pitch (0.625 x pitch) A connec...
- Package deal
- Exam (elaborations)
- • 8 pages •
_______ links have two bushings that are press fit into two roller link plates and links have two rollers that spin freely on the bushings - Answer-Roller What is the pitch in roller chain? - Answer-Distance between centres of adjacent joint members What is the chain width in roller chain? - Answer-The minimum distance between link plates and it's 5/8 of the pitch What is roller diameter in roller chain? - Answer-Outside diameter of roller and 5/8 of the pitch (0.625 x pitch) A connec...
Millwright Shafts and Attachments Exam Questions $ Answers (2025) Update
Always replace set screws when equipment is given a major _____________ a. face lift b. over haul c. revision d. extension - Answer-b. over haul Normally shaft type and _____________ are selected when equipment is designed a. dimensions b. size c. diameter d. thickness - Answer-b. size Feather keys permit end movement of the two parts either in operation or during assembly. They come in two types a. plain, rounded b. sunk, extrusion c. fixed, sliding d. sliding, staitonary - Answe...
- Package deal
- Exam (elaborations)
- • 8 pages •
Always replace set screws when equipment is given a major _____________ a. face lift b. over haul c. revision d. extension - Answer-b. over haul Normally shaft type and _____________ are selected when equipment is designed a. dimensions b. size c. diameter d. thickness - Answer-b. size Feather keys permit end movement of the two parts either in operation or during assembly. They come in two types a. plain, rounded b. sunk, extrusion c. fixed, sliding d. sliding, staitonary - Answe...
Millwright Red Seal Study 1 (2025 )Latest Questions With Passed Solutions!!
1. The Workplace Hazardous Materials Information System is designed to protect the worker from exposure to harmful substances. A) True B) False - Answer-A) True What type of valve is usually installed with a rupture relief valve? A) Butterfly B) Plug C) Balanced D) Needle - Answer-B) Plug 1. Who is responsible for safety in the workplace? A) The employer B) The employee C) The general public D) All of the above - Answer-D)All of the above On a small impulse steam turbine the nozzle...
- Package deal
- Exam (elaborations)
- • 20 pages •
1. The Workplace Hazardous Materials Information System is designed to protect the worker from exposure to harmful substances. A) True B) False - Answer-A) True What type of valve is usually installed with a rupture relief valve? A) Butterfly B) Plug C) Balanced D) Needle - Answer-B) Plug 1. Who is responsible for safety in the workplace? A) The employer B) The employee C) The general public D) All of the above - Answer-D)All of the above On a small impulse steam turbine the nozzle...
UA Rigging Questions with Answers (All Answers Correct)
The ___ classification usually has seven wires per strand and is referred to as coarse laid rope. - Answer-6 x 7 A ___ is used to attach a hook such as a tackle block at any point on a rope between its ends. - Answer-catspaw knot A ___ is primarily used to finish off other knots and should not be used by itself for lifting. - Answer-half hitch It is common practice to make ___ whippings before cutting a rope and to cut between the whippings, eliminating the possibility of them unraveling....
- Exam (elaborations)
- • 6 pages •
The ___ classification usually has seven wires per strand and is referred to as coarse laid rope. - Answer-6 x 7 A ___ is used to attach a hook such as a tackle block at any point on a rope between its ends. - Answer-catspaw knot A ___ is primarily used to finish off other knots and should not be used by itself for lifting. - Answer-half hitch It is common practice to make ___ whippings before cutting a rope and to cut between the whippings, eliminating the possibility of them unraveling....
Module 6: Rigging Questions and Answers Fully Solved 100%
Because of the need for increased toughness shackles for most over head lifting are made from? - Answer-Forged steel If the identification tag on a synthetic sling is missing or illegible, the sling must be? - Answer-Removed from service immediately. The size of the shackle is determined by the diameter of its? - Answer-Body A type of rigging equipment that uses a pulley system to provide a mechanical advantage for lifting a load is a? - Answer-Hoist The max load weight for a sling is the...
- Exam (elaborations)
- • 4 pages •
Because of the need for increased toughness shackles for most over head lifting are made from? - Answer-Forged steel If the identification tag on a synthetic sling is missing or illegible, the sling must be? - Answer-Removed from service immediately. The size of the shackle is determined by the diameter of its? - Answer-Body A type of rigging equipment that uses a pulley system to provide a mechanical advantage for lifting a load is a? - Answer-Hoist The max load weight for a sling is the...
Rigger 1 - study questions #1Questions and Answers Fully Solved 100%
1. According to OSHA, quadruple sling bridle ratings are the same as: - Answer-triple sling bridle ratings 2. According to ASME B30.10, (Hooks) markings shall be forged, cast or die stamped on what area of the hook? - Answer-non-wearing area 3. Referring to the rigger reference booklet, what is the capacity of a 7/8 inch grade 80 alloy chain sling using a vertical hitch? - Answer-34,200 lbs 4. According to ASME B30.10, (Hooks) any hook that has any visible bend or twist from the plane of ...
- Exam (elaborations)
- • 6 pages •
1. According to OSHA, quadruple sling bridle ratings are the same as: - Answer-triple sling bridle ratings 2. According to ASME B30.10, (Hooks) markings shall be forged, cast or die stamped on what area of the hook? - Answer-non-wearing area 3. Referring to the rigger reference booklet, what is the capacity of a 7/8 inch grade 80 alloy chain sling using a vertical hitch? - Answer-34,200 lbs 4. According to ASME B30.10, (Hooks) any hook that has any visible bend or twist from the plane of ...
Hoisting & Rigging IHSA Safety Manual Questions And Answers Already Graded A+
When the weights and capacities are known the rigger must be? - Answer-Determine how to lift the load so that it is stable. After the sling which rigging equipment is mostly used? - Answer-Sling How many types of construction illustrated? - Answer-4 What is the field calculation formula ? - Answer-WLL = diameter by diameter by 8 What is the WLL of double basket hitch? - Answer-WLL by H/L by 3 WLL stands for - Answer-Working load limit Distance from the power lines more than 250000 volt? -...
- Exam (elaborations)
- • 1 pages •
When the weights and capacities are known the rigger must be? - Answer-Determine how to lift the load so that it is stable. After the sling which rigging equipment is mostly used? - Answer-Sling How many types of construction illustrated? - Answer-4 What is the field calculation formula ? - Answer-WLL = diameter by diameter by 8 What is the WLL of double basket hitch? - Answer-WLL by H/L by 3 WLL stands for - Answer-Working load limit Distance from the power lines more than 250000 volt? -...
Rigging practices Questions and Answers Fully Solved 100%
a crane accident occurs when any one of the elements in the crane operating envelope fails to perform correctly during crane operations, maintenance, or testing, which results in any of the following except: - Answer-over rigging the load removal of cracks from rigging hardware must be verified by ____ before it is returning to service? - Answer-non-destructive testing which of the following operator actions will most likely cause a reduction in the capacity of a mobile crane? - Answer-boo...
- Exam (elaborations)
- • 5 pages •
a crane accident occurs when any one of the elements in the crane operating envelope fails to perform correctly during crane operations, maintenance, or testing, which results in any of the following except: - Answer-over rigging the load removal of cracks from rigging hardware must be verified by ____ before it is returning to service? - Answer-non-destructive testing which of the following operator actions will most likely cause a reduction in the capacity of a mobile crane? - Answer-boo...
Rigger Safety Training Course Questions with Answers (All Answers Correct)
According to OSHA, natural and synthetic fiber rope slings shall be removed from service if any of the following conditions are present: - Answer-powdered fiber between strands discoloration or rotting broken or cut fibers ALL OF THE ABOVE According to OSHA, which of the conditions listed below will automatically remove the synthetic web sling from service? - Answer-snags, punctures, tears or cuts acid or caustic burns broken or worn stitches and distortion ALL OF THE ABOVE According to OS...
- Exam (elaborations)
- • 5 pages •
According to OSHA, natural and synthetic fiber rope slings shall be removed from service if any of the following conditions are present: - Answer-powdered fiber between strands discoloration or rotting broken or cut fibers ALL OF THE ABOVE According to OSHA, which of the conditions listed below will automatically remove the synthetic web sling from service? - Answer-snags, punctures, tears or cuts acid or caustic burns broken or worn stitches and distortion ALL OF THE ABOVE According to OS...
Kappa Beta Gamma Questions With Complete Solutions!!
BIO 156 EXAM 1 QUESTIONS WITH 100 % CORRECT ANSWERS | VERIFIED
Law of Agency - Champions School of Real Estate 2024 Latest Questions With Passed Solutions!!
HC21- Legal & Ethical Responsibilities Questions and Answers New (2024/2025) Solved 100% Correct
Indiana Life & Health Insurance Exam Questions with Answers (All Answers Correct)