Academicmaterials
On this page, you find all documents, package deals, and flashcards offered by seller ACADEMICMATERIALS.
- 8988
- 0
- 822
Community
- Followers
- Following
43 Reviews received
9824 items
Millwright – Fasteners Exams Questions & Answers Grade A+ 2025 Update
1. A screw that creates a mating helix when installed is called a: a. Self tapping screw b. Cap screw c. Hardened screw d. Pan head fastener - Answer-a. Self tapping screw 2. A bolt that is tightened by turning counter clockwise is said to have what? a. A left hand thread b. A right hand thread c. A pan head d. A hardened shaft - Answer-a. A left hand thread 3. The "crest" of a thread refers to: a. The top point of the thread b. The bottom base of the thread c. The pitch of th...
- Package deal
- Exam (elaborations)
- • 4 pages •
1. A screw that creates a mating helix when installed is called a: a. Self tapping screw b. Cap screw c. Hardened screw d. Pan head fastener - Answer-a. Self tapping screw 2. A bolt that is tightened by turning counter clockwise is said to have what? a. A left hand thread b. A right hand thread c. A pan head d. A hardened shaft - Answer-a. A left hand thread 3. The "crest" of a thread refers to: a. The top point of the thread b. The bottom base of the thread c. The pitch of th...
Millwright Level 1: Basic Layout (15104-06) Questions and Answers Fully Solved 100%
Prick Punches - Answer-Made of steel and is about 4 to 6 inches long, used with small hammer to mark centers and to mark centers and to make small indentations along layout lines. The end of the punch to a point with an angle of about 60-degrees. Steel Rules - Answer-Made of tempered steel that has graduations down to 1/64 of an inch. Some steel rules are marked on both sides. One side may be marked in eighths and sixteenths of an inch, the other side in thirty-seconds and sixty-fourths of ...
- Package deal
- Exam (elaborations)
- • 2 pages •
Prick Punches - Answer-Made of steel and is about 4 to 6 inches long, used with small hammer to mark centers and to mark centers and to make small indentations along layout lines. The end of the punch to a point with an angle of about 60-degrees. Steel Rules - Answer-Made of tempered steel that has graduations down to 1/64 of an inch. Some steel rules are marked on both sides. One side may be marked in eighths and sixteenths of an inch, the other side in thirty-seconds and sixty-fourths of ...
Millwright - Hydraulics Questions and Answers Fully Solved 100% Latest Update
What is the definition of displacement? - Answer-Displacement is the amount of liquid handled in one rotation of the motor. It is usually expressed in cubic centimeters per revolution or cubic inches per revolution. What is the law of conservation of energy? A. Energy cannot be destroyed, but it may be created from one form to another. B. Energy cannot be destroyed, but it may be converted from one form to another. C. Energy can be destroyed, but cant be converted from one form to another ...
- Package deal
- Exam (elaborations)
- • 8 pages •
What is the definition of displacement? - Answer-Displacement is the amount of liquid handled in one rotation of the motor. It is usually expressed in cubic centimeters per revolution or cubic inches per revolution. What is the law of conservation of energy? A. Energy cannot be destroyed, but it may be created from one form to another. B. Energy cannot be destroyed, but it may be converted from one form to another. C. Energy can be destroyed, but cant be converted from one form to another ...
Millwright Interprovincial (Red Seal) Review Exam 3 Questions And Answers Already Graded A+
Which of the following is true with respect to using oil as lubrication? A) It is more convenient to retain B) It contains contaminants C) It carries away heat D) Cannot permit high speeds - Answer-C) It carries away heat Which of the following best describes an axial labyrinth seal? A) It can only tolerate very limited axial and radial movements B) It is the simplest and cheapest C) It does not alter widths of gaps allowing them to be very small - Answer-C) it does not alter widths of ...
- Package deal
- Exam (elaborations)
- • 10 pages •
Which of the following is true with respect to using oil as lubrication? A) It is more convenient to retain B) It contains contaminants C) It carries away heat D) Cannot permit high speeds - Answer-C) It carries away heat Which of the following best describes an axial labyrinth seal? A) It can only tolerate very limited axial and radial movements B) It is the simplest and cheapest C) It does not alter widths of gaps allowing them to be very small - Answer-C) it does not alter widths of ...
Chain drives - level 2 millwright Updated Exam Questions and Answers Fully Solved 100%
_______ links have two bushings that are press fit into two roller link plates and links have two rollers that spin freely on the bushings - Answer-Roller What is the pitch in roller chain? - Answer-Distance between centres of adjacent joint members What is the chain width in roller chain? - Answer-The minimum distance between link plates and it's 5/8 of the pitch What is roller diameter in roller chain? - Answer-Outside diameter of roller and 5/8 of the pitch (0.625 x pitch) A connec...
- Package deal
- Exam (elaborations)
- • 8 pages •
_______ links have two bushings that are press fit into two roller link plates and links have two rollers that spin freely on the bushings - Answer-Roller What is the pitch in roller chain? - Answer-Distance between centres of adjacent joint members What is the chain width in roller chain? - Answer-The minimum distance between link plates and it's 5/8 of the pitch What is roller diameter in roller chain? - Answer-Outside diameter of roller and 5/8 of the pitch (0.625 x pitch) A connec...
Millwright Shafts and Attachments Exam Questions $ Answers (2025) Update
Always replace set screws when equipment is given a major _____________ a. face lift b. over haul c. revision d. extension - Answer-b. over haul Normally shaft type and _____________ are selected when equipment is designed a. dimensions b. size c. diameter d. thickness - Answer-b. size Feather keys permit end movement of the two parts either in operation or during assembly. They come in two types a. plain, rounded b. sunk, extrusion c. fixed, sliding d. sliding, staitonary - Answe...
- Package deal
- Exam (elaborations)
- • 8 pages •
Always replace set screws when equipment is given a major _____________ a. face lift b. over haul c. revision d. extension - Answer-b. over haul Normally shaft type and _____________ are selected when equipment is designed a. dimensions b. size c. diameter d. thickness - Answer-b. size Feather keys permit end movement of the two parts either in operation or during assembly. They come in two types a. plain, rounded b. sunk, extrusion c. fixed, sliding d. sliding, staitonary - Answe...
Millwright Red Seal Study 1 (2025 )Latest Questions With Passed Solutions!!
1. The Workplace Hazardous Materials Information System is designed to protect the worker from exposure to harmful substances. A) True B) False - Answer-A) True What type of valve is usually installed with a rupture relief valve? A) Butterfly B) Plug C) Balanced D) Needle - Answer-B) Plug 1. Who is responsible for safety in the workplace? A) The employer B) The employee C) The general public D) All of the above - Answer-D)All of the above On a small impulse steam turbine the nozzle...
- Package deal
- Exam (elaborations)
- • 20 pages •
1. The Workplace Hazardous Materials Information System is designed to protect the worker from exposure to harmful substances. A) True B) False - Answer-A) True What type of valve is usually installed with a rupture relief valve? A) Butterfly B) Plug C) Balanced D) Needle - Answer-B) Plug 1. Who is responsible for safety in the workplace? A) The employer B) The employee C) The general public D) All of the above - Answer-D)All of the above On a small impulse steam turbine the nozzle...
UA Rigging Questions with Answers (All Answers Correct)
The ___ classification usually has seven wires per strand and is referred to as coarse laid rope. - Answer-6 x 7 A ___ is used to attach a hook such as a tackle block at any point on a rope between its ends. - Answer-catspaw knot A ___ is primarily used to finish off other knots and should not be used by itself for lifting. - Answer-half hitch It is common practice to make ___ whippings before cutting a rope and to cut between the whippings, eliminating the possibility of them unraveling....
- Exam (elaborations)
- • 6 pages •
The ___ classification usually has seven wires per strand and is referred to as coarse laid rope. - Answer-6 x 7 A ___ is used to attach a hook such as a tackle block at any point on a rope between its ends. - Answer-catspaw knot A ___ is primarily used to finish off other knots and should not be used by itself for lifting. - Answer-half hitch It is common practice to make ___ whippings before cutting a rope and to cut between the whippings, eliminating the possibility of them unraveling....
Module 6: Rigging Questions and Answers Fully Solved 100%
Because of the need for increased toughness shackles for most over head lifting are made from? - Answer-Forged steel If the identification tag on a synthetic sling is missing or illegible, the sling must be? - Answer-Removed from service immediately. The size of the shackle is determined by the diameter of its? - Answer-Body A type of rigging equipment that uses a pulley system to provide a mechanical advantage for lifting a load is a? - Answer-Hoist The max load weight for a sling is the...
- Exam (elaborations)
- • 4 pages •
Because of the need for increased toughness shackles for most over head lifting are made from? - Answer-Forged steel If the identification tag on a synthetic sling is missing or illegible, the sling must be? - Answer-Removed from service immediately. The size of the shackle is determined by the diameter of its? - Answer-Body A type of rigging equipment that uses a pulley system to provide a mechanical advantage for lifting a load is a? - Answer-Hoist The max load weight for a sling is the...
Rigger 1 - study questions #1Questions and Answers Fully Solved 100%
1. According to OSHA, quadruple sling bridle ratings are the same as: - Answer-triple sling bridle ratings 2. According to ASME B30.10, (Hooks) markings shall be forged, cast or die stamped on what area of the hook? - Answer-non-wearing area 3. Referring to the rigger reference booklet, what is the capacity of a 7/8 inch grade 80 alloy chain sling using a vertical hitch? - Answer-34,200 lbs 4. According to ASME B30.10, (Hooks) any hook that has any visible bend or twist from the plane of ...
- Exam (elaborations)
- • 6 pages •
1. According to OSHA, quadruple sling bridle ratings are the same as: - Answer-triple sling bridle ratings 2. According to ASME B30.10, (Hooks) markings shall be forged, cast or die stamped on what area of the hook? - Answer-non-wearing area 3. Referring to the rigger reference booklet, what is the capacity of a 7/8 inch grade 80 alloy chain sling using a vertical hitch? - Answer-34,200 lbs 4. According to ASME B30.10, (Hooks) any hook that has any visible bend or twist from the plane of ...
Texas Government 2306 - Exam 3 (100% correct and graded A+)
Kappa Beta Gamma Questions With Complete Solutions!!
BIO 156 EXAM 1 QUESTIONS WITH 100 % CORRECT ANSWERS | VERIFIED
HC21- Legal & Ethical Responsibilities Questions and Answers New (2024/2025) Solved 100% Correct
Indiana Life & Health Insurance Exam Questions with Answers (All Answers Correct)