Kimarimonicah
On this page, you find all documents, package deals, and flashcards offered by seller kimarimonicah.
- 992
- 0
- 0
Community
- Followers
- Following
992 items
Ohio MPJE Question Bank 2021
A prescription is written for atenolol 50 mg and dated August 15, 2020. The patient brings the 
prescription in to be filled on March 1, 2021. Can you legally fill the prescription? 
a) Yes 
b) No - Answer-b (> 6 months) 
Prescription record must be kept for ______ under federal law, and ______ under Ohio law. 
a) 3 years, 3 years 
b) 2 years, 2 years 
c) 2 years, 3 years 
d) 2 years, 5 years 
e) none of the above - Answer-c 
Records for poisons must be kept 5 years. 
a) True 
b) False - Ans...
- Exam (elaborations)
- • 66 pages •
A prescription is written for atenolol 50 mg and dated August 15, 2020. The patient brings the 
prescription in to be filled on March 1, 2021. Can you legally fill the prescription? 
a) Yes 
b) No - Answer-b (> 6 months) 
Prescription record must be kept for ______ under federal law, and ______ under Ohio law. 
a) 3 years, 3 years 
b) 2 years, 2 years 
c) 2 years, 3 years 
d) 2 years, 5 years 
e) none of the above - Answer-c 
Records for poisons must be kept 5 years. 
a) True 
b) False - Ans...
Stationary Engineer
How much clearance from the top of the boiler is needed for a HP boiler that produces 70000 lbs 
of steam? - Answer-7 feet 
On a gas fired boiler what is the proper gas to air mixture - Answer-30%-70% and in special 
arrangements it can be as high as 100% . ANSWER CHAPTER 11 remember% 
What is the total hardness in a system that was found to have calcium hardness of 60ppm and 
magnesium hardness of 18ppm and carbon hardness of 12 ppm? - Answer-TH=(Ca x 2.5) + (Mg 
x 4.1)nTH=(60 x 2.5) + (1...
- Exam (elaborations)
- • 36 pages •
How much clearance from the top of the boiler is needed for a HP boiler that produces 70000 lbs 
of steam? - Answer-7 feet 
On a gas fired boiler what is the proper gas to air mixture - Answer-30%-70% and in special 
arrangements it can be as high as 100% . ANSWER CHAPTER 11 remember% 
What is the total hardness in a system that was found to have calcium hardness of 60ppm and 
magnesium hardness of 18ppm and carbon hardness of 12 ppm? - Answer-TH=(Ca x 2.5) + (Mg 
x 4.1)nTH=(60 x 2.5) + (1...
Engineers License Study Guide
What winding is connected to the load? - Answer-secondary 
Regulates the steam pressure? - Answer-Modulating pressure control 
When can you blow down a water wall? - Answer-when there is no pressure on the boiler 
What must be done to prevent flashback? - Answer-purge 
Steam at a high velocity is converted into _ _ _ _ _ _ _ _ _ _engery? - Answer-kinetic energy 
Supercritical pressure and saturation temperature? - Answer-3206 PSIA at 705.4°F 
One gallon of water weighs? - Answer-8.33 pounds 
Cy...
- Exam (elaborations)
- • 7 pages •
What winding is connected to the load? - Answer-secondary 
Regulates the steam pressure? - Answer-Modulating pressure control 
When can you blow down a water wall? - Answer-when there is no pressure on the boiler 
What must be done to prevent flashback? - Answer-purge 
Steam at a high velocity is converted into _ _ _ _ _ _ _ _ _ _engery? - Answer-kinetic energy 
Supercritical pressure and saturation temperature? - Answer-3206 PSIA at 705.4°F 
One gallon of water weighs? - Answer-8.33 pounds 
Cy...
HIGH PRESSURE STEAM EXAM NYC
1 The maximum blow down for a safety valve on a forced flow steam generator or high 
temperature water boiler shall be of what percent of the set pressure? - Answer-10%. HP Code: 
14-9.12 
3 Who oversees the code for any plumbing installations? - Answer-The NYC Plumbing Code 
NYC Mech: 1002.1 
4 When will anchorage or guides be inspected? - Answer-Annually. NYC Mech: 1210.3.1.2 
5 How many brass washout plugs does a miniature boiler have? - Answer-Not less than 3 Brass 
Washout Plugs 1 inche...
- Exam (elaborations)
- • 18 pages •
1 The maximum blow down for a safety valve on a forced flow steam generator or high 
temperature water boiler shall be of what percent of the set pressure? - Answer-10%. HP Code: 
14-9.12 
3 Who oversees the code for any plumbing installations? - Answer-The NYC Plumbing Code 
NYC Mech: 1002.1 
4 When will anchorage or guides be inspected? - Answer-Annually. NYC Mech: 1210.3.1.2 
5 How many brass washout plugs does a miniature boiler have? - Answer-Not less than 3 Brass 
Washout Plugs 1 inche...
Practice Questions builder
A valve that should be used for throttling is a? - Answer-Globe Valve 
what is the acceptable range for residual sodium sulfite in the boiler maintain? - Answer-30-70 
what is the BTU content of a Gallon of #4? - Answer-146,000 
what does a zeolite water softener system use as a means of regeneration? - Answer-Brine 
what are the steps for a Zeolite rejuvenation water softener process? - Answer-Backwash, 
Where is medium temperature liquid found in a refrigeration cycle ? - Answer-Condenser 
Whe...
- Exam (elaborations)
- • 7 pages •
A valve that should be used for throttling is a? - Answer-Globe Valve 
what is the acceptable range for residual sodium sulfite in the boiler maintain? - Answer-30-70 
what is the BTU content of a Gallon of #4? - Answer-146,000 
what does a zeolite water softener system use as a means of regeneration? - Answer-Brine 
what are the steps for a Zeolite rejuvenation water softener process? - Answer-Backwash, 
Where is medium temperature liquid found in a refrigeration cycle ? - Answer-Condenser 
Whe...
Boiler Operator Licensing Exam
all steam boilers must have - Answer-1 or more safety valves 
before anyone enters the boiler drum, the main steam stop valve, bottom blowdown valves, & 
feedwater valves should be - Answer-Locked closed 
at atmospheric pressure, water begins to boil at approximately - Answer-212 degrees F 
fuels most commonly used in boilers - Answer-Fuel oil, gas, & coal 
must be connected to the highest part of the steam side of the boiler - Answer-Steam pressure 
gauge 
with an NOWL in a boiler, the gauge ...
- Exam (elaborations)
- • 7 pages •
all steam boilers must have - Answer-1 or more safety valves 
before anyone enters the boiler drum, the main steam stop valve, bottom blowdown valves, & 
feedwater valves should be - Answer-Locked closed 
at atmospheric pressure, water begins to boil at approximately - Answer-212 degrees F 
fuels most commonly used in boilers - Answer-Fuel oil, gas, & coal 
must be connected to the highest part of the steam side of the boiler - Answer-Steam pressure 
gauge 
with an NOWL in a boiler, the gauge ...
Ohio boiler licensing exam
Which type of heat transfer takes place by actual physical contact, from molecule to molecule, 
without displacing the molecules? - Answer-Conduction 
When designing a boiler, special consideration must be given to heat transmision by? - AnswerRadiation, conduction, and convection 
What parts make up the heating surface in a scotch marine firetube boiler? - Answer-The flue 
and the tubes 
Which type of boiler is the most econimical to build? - Answer-Firetube 
a boiler is an industrial boiler...
- Exam (elaborations)
- • 13 pages •
Which type of heat transfer takes place by actual physical contact, from molecule to molecule, 
without displacing the molecules? - Answer-Conduction 
When designing a boiler, special consideration must be given to heat transmision by? - AnswerRadiation, conduction, and convection 
What parts make up the heating surface in a scotch marine firetube boiler? - Answer-The flue 
and the tubes 
Which type of boiler is the most econimical to build? - Answer-Firetube 
a boiler is an industrial boiler...
MN Boiler License Questions
a question - Answer-an answer 
what are the conditions necessary for good combustion? 
a) low sulfur content 
b) Thermal, thermocoupler, tubular 
c) turbulence, temperature, time 3T's - Answer-c) turbulence, temperature, time 3T's 
why is secondary air necessary in hand fired boilers? 
a) Necessary to burn the combustible gases 
b) if primary air should fail 
c) used only if sulfur content is high - Answer-a) Necessary to burn the combustible gases 
when pressure increases on steam from a gi...
- Exam (elaborations)
- • 36 pages •
a question - Answer-an answer 
what are the conditions necessary for good combustion? 
a) low sulfur content 
b) Thermal, thermocoupler, tubular 
c) turbulence, temperature, time 3T's - Answer-c) turbulence, temperature, time 3T's 
why is secondary air necessary in hand fired boilers? 
a) Necessary to burn the combustible gases 
b) if primary air should fail 
c) used only if sulfur content is high - Answer-a) Necessary to burn the combustible gases 
when pressure increases on steam from a gi...
Ohio Temps Test - 2021/2022
You must be ______________ to receive your temporary permit. 
(A) Seventeen 
(B) Sixteen and a half 
(C) Fifteen and a half 
(D) Eighteen - Answer-Fifteen and a half 
If you are approached by an emergency vehicle displaying flashing lights and an audible signal, 
you must _______________. 
(A) Stop where you are 
(B) Increase your speed and stay ahead of said vehicle 
(C) Pull over to the right 
(D) Clear lane and pull over to left - Answer-Pull over to the right 
When you are being passed ...
- Exam (elaborations)
- • 9 pages •
You must be ______________ to receive your temporary permit. 
(A) Seventeen 
(B) Sixteen and a half 
(C) Fifteen and a half 
(D) Eighteen - Answer-Fifteen and a half 
If you are approached by an emergency vehicle displaying flashing lights and an audible signal, 
you must _______________. 
(A) Stop where you are 
(B) Increase your speed and stay ahead of said vehicle 
(C) Pull over to the right 
(D) Clear lane and pull over to left - Answer-Pull over to the right 
When you are being passed ...
Ohio Boiler Test
The pressure at the base of a vertical foot of water is - Answer-0.433 psi. 
When performing a hydrostatic test, the pressure on the boiler should be increased to - Answer-1 
½ times the safety valve setting . 
A boiler steam pressure gauge should have a range of - Answer-1 ½ to 2 times the safety valve 
setting: 
The maximum size of the bottom blowdown line and the surface blowdown line is - Answer-2 
1/2" 
During startup, the boiler vent should remain open until a pressure of - Answer-ap...
- Exam (elaborations)
- • 17 pages •
The pressure at the base of a vertical foot of water is - Answer-0.433 psi. 
When performing a hydrostatic test, the pressure on the boiler should be increased to - Answer-1 
½ times the safety valve setting . 
A boiler steam pressure gauge should have a range of - Answer-1 ½ to 2 times the safety valve 
setting: 
The maximum size of the bottom blowdown line and the surface blowdown line is - Answer-2 
1/2" 
During startup, the boiler vent should remain open until a pressure of - Answer-ap...