SDI Firearm Finishes and Engraving (FTT 201) Questions And Answers Latest Updates
11 views 0 purchase
Course
SDI Firearm Finishes and Engraving
Institution
SDI Firearm Finishes And Engraving
Nickel plating has been a popular finish for handguns and certain small parts of long
guns since the turn of the century. The finish is applied by a process called: -
️️Electroplating
When using a wheel for polishing: - ️️Always polish with sharp edges pointed in the
same direction the ...
SDI Firearm Finishes and Engraving
(FTT 201)
Nickel plating has been a popular finish for handguns and certain small parts of long
guns since the turn of the century. The finish is applied by a process called: -
✔️✔️Electroplating
When using a wheel for polishing: - ✔️✔️Always polish with sharp edges pointed in the
same direction the wheel is turning.
Which of the following wheel types used in machine polishing will cut the fastest? -
✔️✔️Felt
Lands in the throat are which are uneven in their short points are usually caused by: -
✔️✔️Cleaning Rod Damage
According to Joe Carlos, what must you do with a barrel to know for certain what its
current capabilities are? - ✔️✔️Shoot It
T/F: The electropolishing process both improves barrel accuracy and is safe for the
environment. - ✔️✔️FALSE
Joe Carlos' experiment showed that electropolishing was: - ✔️✔️Effective for
Increasing the Accuracy of Damaged Barrels
The fire lapping process involves: - ✔️✔️Firing cartridges with progressively finer grit
abrasive coated bullets, which effectively polishes the bore.
T/F: Fire lapping has about the same average effective improvement on accuracy as
electropolishing. - ✔️✔️TRUE
T/F: One possible indicator that a barrel is likely to shoot poorly is pitting near the
crown. - ✔️✔️TRUE
There is generally more need for fire lapping in: - ✔️✔️Button Rifled Bores
T/F: Fire lapping does not remove metal from the barrel. - ✔️✔️FALSE
, "Throat maintenance" bullets were found through extensive testing to: - ✔️✔️Have a
reliably positive impact on accuracy
The two basic metal preparation processes, according to Frank Fry, are: - ✔️✔️Hand
and Machine
The first of three steps to hand finishing is: - ✔️✔️Remove machine marks with files
To prevent the loss of or "pulling" of letters and numbers, these areas should be
polished by: - ✔️✔️Hand
If stamping has been damaged or pitted, you should: - ✔️✔️Leave the damaged
stamping alone
For basic polishing: protect all of the newly-polished surfaces from rusting with which of
the following until you are ready to apply the bluing solution: - ✔️✔️Light Coat of Oil
In general, power polishing entails starting which of the following grits and polishing the
surface of the metal in a given direction: - ✔️✔️Coarset
Power buffing: When using a bench grinder, one end of the double ended shaft contains
a conventional grinding wheel, while the other end has which of the following: -
✔️✔️Muslin Buffing Wheel
There are four popular methods of finishing gun metal prior to bluing, plating,
parkerizing, and the like: hand polishing, power buffing, mass finishing, and which of the
following: - ✔️✔️Sandblasting
Besides keeping the metal free of oil, which of the following is the most important step in
obtaining a rich, velvety finish on your gun parts? - ✔️✔️Polishing
When polishing, be careful not to polish out which of the following, and other lettering
that is found on the typical firearm? - ✔️✔️Serial Numbers
While polishing or draw filling, it is important that all screw holes are maintained at the
proper taper and that the holes do not become: - ✔️✔️Funneled
Which of the following seems to be the most critical task involved in restoring valuable
firearms? - ✔️✔️Metal Refinishing
T/F: Although it is a normal practice in gun shops, using the lathe for polishing and
grinding is recommended. - ✔️✔️FALSE
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICMATERIALS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for R148,57. You're not tied to anything after your purchase.
