You

National Institute for Metalworking Skills NIMS CNC Operator Test NIMS Machining Certification Tests Bundle Updated 2024 - CNC Operator Test, Machining level 1, level 2, NIMS Milling, Precision, Lathe operations practice test with verified answers

NIMS CNC Lathe Operations Practice Test Typically done as part of the start-up procedure, which of the following is the process of positioning the CNC turning center's axes at a fixed reference position to allow the MCU to accurately establish / track the machine's position? - ANS: Homing To maintain proper coolant levels and concentrations, and to ensure a machine tool has sufficient lubrication, a machinist should check the machine's fluids: - ANS: Every shift Which code identi...

National Institute for Metalworking Skills NIMS Certification for Precision Machining The safest way to remove chips from a lathe or milling machine - ANS: brush Small chips left on the spindle nose of the lathe should be cleaned to avoid - ANS: run out on work holding devices Grease guns are used to insert grease - ANS: zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder - ANS: use lubricant found in central lubricating...

National Institute for Metalworking Skills NIMS Milling Practice Test If a dimension on a drawing is 4.868" with a tolerance of +/- .003", what is the largest the dimension can check and still be in tolerance? - ANS: 4.871" If you are standing in front of a vertical CNC machining center, what direction does the X-axis travel? - ANS: left to right A boxed dimension is defined as a... - ANS: basic S.D.S. (Safety Data Sheet) are sheets that? - ANS: Describe the chemicals and mate...

National Institute for Metalworking Skills NIMS CNC Operator Test Given an 18 ¾" length of stock, how many 2 ½'" pieces can be cut from it? - ANS: 7.5 (18.75/2.5) How often should you check the lubrication levels on a machine? - ANS: Daily On a blueprint, what do you call a dimension in a box (boxed dimension)? - ANS: Base When should you wear your safety glasses in the shop? - ANS: Always What is the RPM formula for drilling? - ANS: What is the code for rapid travers...

National Institute for Metalworking Skills NIMS Machining Level 2 Test Preparation To convert inches to millimeters, a machinist would use a constant of _________. - ANS: 25.4 The feed rate for converting a hole on a drill press should be __________ that of drilling. - ANS: 2 times The feed rate for reaming a hole on a drill press should be __________ that of drilling. - ANS: 1/8th The most accurate method of measuring an angle is a : - ANS: combination set Which type of head for a...

NIMS Machining Level I Test Preparation/ Practice Questions updated 2024 with Correct and Verified Answers The safest way to remove chips from a lathe or milling machine is to use a: - ANS: Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid: - ANS: Run out on work holding devices Grease guns are used to insert grease into: - ANS: Zerk fittings on machine tools To lubricate the ways of a lathe, the gibs of a mill, or the cross slide of a grinder: - ANS: U...

FEMA National Incident Management System (NIMS) IS 703B - National Incident Management System Resource Exam Incident managers begin planning for the demobilization process: - ANS: As soon as the incident is stabilized, including during resource mobilization. The key to effective management of donations is to: - ANS: Develop public information and media releases to help prevent communities and voluntary groups from collecting donations. The resource management process is a sequence of t...

FEMA National Incident Management System (NIMS) IS 700A – NIMS Resource Management Exam In most incidents, which source provides the first line of emergency response and incident management resources? - ANS: A. Local or tribal resources and local mutual aid and assistance agreements. What term is used to refer to broad classes that characterize like resources, such as teams, equipment, supplies, vehicles, and aircraft? - ANS: A. Kind The key to effective management of donations is the ...

FEMA National Incident Management System (NIMS) IS 700 – National Incident Management System Final Exam Review Which NIMS Management Characteristic includes documents that record and communicate incident objectives, tactics, and assignments for operations and support? - ANS: Incident Action Planning Which ICS structure enables different jurisdictions to jointly manage and direct incident activities with a single incident action plan? - ANS: Unified Command Which NIMS Management Characte...