ABYC Electrical Exam Questions And
Answers
When testing for excessive EMF emissions near a conductor or appliance, the tool of choice is
a(an):
A. Ohmmeter
B. DVOM
C. Gauss meter
D. infrared sensor C. Gauss meter
The primary problem with using a series circuit to supply multiple loads is ...
When testing for excessive EMF emissions near a conductor or appliance, the tool of choice is
a(an):
A. Ohmmeter
B. DVOM
C. Gauss meter
D. infrared sensor C. Gauss meter
The primary problem with using a series circuit to supply multiple loads is that:
A. voltage drop will be excessive
B. the capacitance will be excessive
C. amperage draw will be multiplied
D. the overcurrent protection device may not work A. voltage drop across each load will
be excessive
The most common electrical circuit problem in a marine application is:
A. short circuits
B. too much continuity
, ABYC Electrical Exam Questions And
Answers
C. unwanted open
D. intercircuit short C. unwanted open
The primary by-product of excessive electrical resistance is:
A. increased amperage
B. increased voltage
C. reduced ambient temperature
D. heat D. heat
One horsepower equals ______.
A. 1000 watts
B. 746 watts
C. 536 watts
D. 146 watts B. 746 watts
Excessive electrical resistance can be caused by __________.
A. oversized conductors, loose terminals, and corrosion.
, ABYC Electrical Exam Questions And
Answers
B. improper wire insulation and excessive wire strand count.
C. fuses with too high of a rating and wattage that is too low.
D. undersized wire, loose connections, and corrosion. D. undersized wire, loose
connections, and corrosion.
The tool of choice for tracing shorted and open circuits is the:
A. Megohmeter
B. Amp clamp
C. potential meter
D. TDR D. TDR
What material is recommended for clamping conductors over engines and moving machinery
according to ABYC?
A. PVC
B. Nylon
C. Metal
D. Any of the above material C. Metal
, ABYC Electrical Exam Questions And
Answers
According to ABYC, acceptable minimum clearance for routing wire near a dry exhaust section
is:
A. 2 in
B. 9 in.
C. 3 in
D. 7 in B 9 in
The maximum number of terminals allowed to be attached to any one terminal stud based on
ABYC is:
A. 1
B. 2
C. 3
D. 4 D. 4
How much current should flow through the DC grounding conductor in a 25 amp DC motor
circuit?
A. 25 amps
B. 0 amps
Los beneficios de comprar resúmenes en Stuvia estan en línea:
Garantiza la calidad de los comentarios
Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!
Compra fácil y rápido
Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.
Enfócate en lo más importante
Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable.
Así llegas a la conclusión rapidamente!
Preguntas frecuentes
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
100% de satisfacción garantizada: ¿Cómo funciona?
Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller UpperClass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for 18,72 €. You're not tied to anything after your purchase.
