100% de satisfacción garantizada Inmediatamente disponible después del pago Tanto en línea como en PDF No estas atado a nada
logo-home
Buscado previamente por ti
Buscado previamente por ti
logo
Ejercicios Resueltos del Libro Maquinas Eléctricas Stephen J. Chapman. Parte 2 de 3. 5,18 €
Añadir al carrito
Navegar rápidamente a
Vista previa
  2.  
  3. Iupsm
  4.  
  5. Maquinas electricas

Respuestas

Ejercicios Resueltos del Libro Maquinas Eléctricas Stephen J. Chapman. Parte 2 de 3.
 0 veces vendidas
  • Grado
  • Maquinas electricas
  • Institución
  • Iupsm
  • Book
  • Máquinas eléctricas

Todos los ejercicios resueltos del libro maquinas eléctricas Stephen J. Chapman. A detalle. Válidos para Grado en Ingeniería de Organización Industrial, Grado en Tecnologías Industriales, Grado en Ingeniería Eléctrica y Grado en Ingeniería Eléctrica/Automática. Tema 4. Fundamentos de má...

[Mostrar más]

Vista previa 4 fuera de 95  páginas

Información del documento

  • 23 de abril de 2020
  • 95
  • 2009/2010
  • Respuestas
  • Desconocido

Temas

  • ingeniería eléctrica
  • motores eléctricos

Libro relacionado

book image

Título del libro:

Autor(es):

  • Edición:
  • ISBN:
  • Edición:

Escuela, estudio y materia

  • Iupsm
  • Maquinas electricas
Todos documentos para esta materia (1)

Vendedor

avatar-seller
manueltSP

Vista previa del contenido

Chapter 4: AC Machinery Fundamentals

4-1. The simple loop is rotating in a uniform magnetic field shown in Figure 4-1 has the following
characteristics:
B = 0.5 T to the right r = 01
. m
l = 0.5 m ω = 103 rad/s
(a) Calculate the voltage etot ( t ) induced in this rotating loop.

(b) Suppose that a 5 Ω resistor is connected as a load across the terminals of the loop. Calculate the
current that would flow through the resistor.
(c) Calculate the magnitude and direction of the induced torque on the loop for the conditions in (b).
(d) Calculate the electric power being generated by the loop for the conditions in (b).
(e) Calculate the mechanical power being consumed by the loop for the conditions in (b). How does
this number compare to the amount of electric power being generated by the loop?
ωm




c r
d
N vab S
vcd
b
a




B


B is a uniform magnetic
field, aligned as shown.

SOLUTION
(a) The induced voltage on a simple rotating loop is given by
eind ( t ) = 2 rωBl sin ω t (4-8)
eind ( t ) = 2 ( 0.1 m )(103 rad/s)(0.5 T )( 0.5 m ) sin103t
eind ( t ) = 5.15 sin103t V

(b) If a 5 Ω resistor is connected as a load across the terminals of the loop, the current flow would be:
eind 5.15 sin 103t V
i (t ) = = = 1.03 sin 103t A
R 5Ω
(c) The induced torque would be:
τ ind ( t ) = 2 rilΒ sin θ (4-17)
τ ind ( t ) = 2 ( 0.1 m )(1.03 sin ω t A )( 0.5 m )( 0.5 T ) sin ω t
τ ind ( t ) = 0.0515 sin 2 ωt N ⋅ m, counterclockwise
(d) The instantaneous power generated by the loop is:
103

, P ( t ) = eindi = (5.15 sin ω t V )(1.03 sin ω t A ) = 5.30 sin 2ωt W

The average power generated by the loop is
1
Pave = 5.30 sin 2ω t dt = 2.65 W
T T


(e) The mechanical power being consumed by the loop is:

( )
P = τ indω = 0.0515 sin 2 ω t V (103 rad/s ) = 5.30 sin 2ω t W

Note that the amount of mechanical power consumed by the loop is equal to the amount of electrical power
created by the loop. This machine is acting as a generator, converting mechanical power into electrical
power.
4-2. Develop a table showing the speed of magnetic field rotation in ac machines of 2, 4, 6, 8, 10, 12, and 14
poles operating at frequencies of 50, 60, and 400 Hz.
SOLUTION The equation relating the speed of magnetic field rotation to the number of poles and electrical
frequency is
120 f e
nm =
P
The resulting table is
Number of Poles f e = 50 Hz f e = 60 Hz f e = 400 Hz
2 3000 r/min 3600 r/min 24000 r/min
4 1500 r/min 1800 r/min 12000 r/min
6 1000 r/min 1200 r/min 8000 r/min
8 750 r/min 900 r/min 6000 r/min
10 600 r/min 720 r/min 4800 r/min
12 500 r/min 600 r/min 4000 r/min
14 428.6 r/min 514.3 r/min 3429 r/min
4-3. A three-phase four-pole winding is installed in 12 slots on a stator. There are 40 turns of wire in each slot
of the windings. All coils in each phase are connected in series, and the three phases are connected in ∆.
The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1800 r/min.
(a) What is the frequency of the voltage produced in this winding?
(b) What are the resulting phase and terminal voltages of this stator?

SOLUTION
(a) The frequency of the voltage produced in this winding is
nm P (1800 r/min )( 4 poles )
fe = = = 60 Hz
120 120
(b) There are 12 slots on this stator, with 40 turns of wire per slot. Since this is a four-pole machine,
there are two sets of coils (4 slots) associated with each phase. The voltage in the coils in one pair of slots
is
E A = 2π N C φ f = 2π ( 40 t )( 0.060 Wb )( 60 Hz ) = 640 V

There are two sets of coils per phase, since this is a four-pole machine, and they are connected in series, so
the total phase voltage is

104

, Vφ = 2 ( 640 V ) = 1280 V

Since the machine is ∆-connected, VL = Vφ = 1280 V .

4-4. A three-phase Y-connected 50-Hz two-pole synchronous machine has a stator with 2000 turns of wire per
phase. What rotor flux would be required to produce a terminal (line-to-line) voltage of 6 kV?
SOLUTION The phase voltage of this machine should be Vφ = VL / 3 = 3464 V . The induced voltage per
phase in this machine (which is equal to Vφ at no-load conditions) is given by the equation

E A = 2π N C φ f
so
EA 3464 V
φ= = = 0.0078 Wb
2π N C f 2π ( 2000 t )(50 Hz )

4-5. Modify the MATLAB program in Example 4-1 by swapping the currents flowing in any two phases. What
happens to the resulting net magnetic field?
SOLUTION This modification is very simple—just swap the currents supplied to two of the three phases.

% M-file: mag_field2.m
% M-file to calculate the net magetic field produced
% by a three-phase stator.

% Set up the basic conditions
bmax = 1; % Normalize bmax to 1
freq = 60; % 60 Hz
w = 2*pi*freq; % angluar velocity (rad/s)

% First, generate the three component magnetic fields
t = 0:1/6000:1/60;
Baa = sin(w*t) .* (cos(0) + j*sin(0));
Bbb = sin(w*t+2*pi/3) .* (cos(2*pi/3) + j*sin(2*pi/3));
Bcc = sin(w*t-2*pi/3) .* (cos(-2*pi/3) + j*sin(-2*pi/3));

% Calculate Bnet
Bnet = Baa + Bbb + Bcc;

% Calculate a circle representing the expected maximum
% value of Bnet
circle = 1.5 * (cos(w*t) + j*sin(w*t));

% Plot the magnitude and direction of the resulting magnetic
% fields. Note that Baa is black, Bbb is blue, Bcc is
% magneta, and Bnet is red.
for ii = 1:length(t)

% Plot the reference circle
plot(circle,'k');
hold on;

% Plot the four magnetic fields
plot([0 real(Baa(ii))],[0 imag(Baa(ii))],'k','LineWidth',2);
plot([0 real(Bbb(ii))],[0 imag(Bbb(ii))],'b','LineWidth',2);
105

, plot([0 real(Bcc(ii))],[0 imag(Bcc(ii))],'m','LineWidth',2);
plot([0 real(Bnet(ii))],[0 imag(Bnet(ii))],'r','LineWidth',3);
axis square;
axis([-2 2 -2 2]);
drawnow;
hold off;

end
When this program executes, the net magnetic field rotates clockwise, instead of counterclockwise.
4-6. If an ac machine has the rotor and stator magnetic fields shown in Figure P4-1, what is the direction of the
induced torque in the machine? Is the machine acting as a motor or generator?




SOLUTION Since τind = kB R × B net , the induced torque is clockwise, opposite the direction of motion. The
machine is acting as a generator.
4-7. The flux density distribution over the surface of a two-pole stator of radius r and length l is given by
B = BM cos ( ω m t − α ) (4-37b)

Prove that the total flux under each pole face is
φ = 2 rlBM




106

Los beneficios de comprar resúmenes en Stuvia estan en línea:

Garantiza la calidad de los comentarios

Garantiza la calidad de los comentarios

Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!

Compra fácil y rápido

Compra fácil y rápido

Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.

Enfócate en lo más importante

Enfócate en lo más importante

Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable. Así llegas a la conclusión rapidamente!

Preguntas frecuentes

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

100% de satisfacción garantizada: ¿Cómo funciona?

Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.

Who am I buying this summary from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller manueltSP. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy this summary for 5,18 €. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

45,681 summaries were sold in the last 30 days

Founded in 2010, the go-to place to buy summaries for 15 years now

Empieza a vender

Vistos recientemente

Lote ·

(0)

Psychology 200 Exams| Questions with 100% Correct Answers | Updated 2024 | Guaranteed A

Caso ·

(0)

PEDS 602 MAKAYLA HENDERSON UTI SHADOW HEALTH (PEDS 602 MAKAYLA HENDERSON UTI SHADOW HEALTH)

Examen ·

(0)

PSYC-290: UNIT 5_ HUMAN DEVELOPMENT ACROSS THE LIFESPAN QUESTIONS WITH 100% CORRECT ANSWERS

Examen ·

(0)

2022-2023 MEDICINE HEALTH SCIENCES UNDERGRADUATE PROFESSIONAL ECALENDER 2ND EDITION

Resumen ·

(0)

Revision Notes: OCR A Level History, Russia, Chapter 7 - Stalin and the Soviet Economy 1929-41

Examen ·

(0)

NFHS Basketball Exam Part II Questions And Answers With Verified Solutions Graded A+

Caso ·

(1)

NR 601 Week 2 COPD Case Study Part 2 >Initial post, faculty and peer responses A+

Lote ·

(0)

Fysiotherapie Minor Musculoskeletaal BUNDEL - Samenvattingen van ALLE theorietoetsen

Examen ·

(2)

Kentucky Health Insurance Exam Questions and Answers (2024 Update) Verified Solutions

5,18 €
  • (0)
Añadir al carrito
Añadido