PACKAGE DEAL OF ASNT VT LEVEL 1,2,3 QUESTION AND ANSWERS COMPILATION 2023

Visual Inspection Test Question and answers rated A+ 2023 Level 1 tech. should be qualified to perform? - correct answer Specific calibrations, specific NDT, specific evaluations for accept- reject determinations per written instructions, and record the results. Level 3 has sufficient techn...

(VT) inspection Question and answers 100% correct 2023 When the molten metal is under a constantly applied force toward the mold, it is known as: - correct answer Dynamic casting Which of the following casting discontinuities are created during solidification that can cause the area between...

NDT Quiz 1, 2, 3, & 4 Question and answers already passed 2023 ASNT formally recognized visual testing (VT) as an NDT method - correct answer at the ANT Fall Conference 1988 Visual testing is unique in that it is - correct answer the only method that reveals indications of discontinuitie...

VT Practice Questions and answers 100% correct 2023 What are the inspection requirements for plate butt welds in aluminum superstructure of a surface ship (not 5XXX)? a. VT followed by PT inspection shall be performed on plate & stiffener butt welds to the following levels: 10% - In-progress ...

ASNT VT Level II Question and answers already passed 2023 B. - correct answer 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annu...

VT Question and answers already passed 2023 At the ANST Fall Conference 1988 - correct answer ANST formally recognized VT as an NDT method The only method that reveals indications of discontinuities directly - correct answer Visual Testing is unique in that it is borescope - correct...

Visual Testing Final Question and answers 2023 verified to pass Visual Testing is unique in that it is: - correct answer the only methods that reveals in indications of discontinuities directly One of the first aids used in visual testing was developed for another industry and was called: -...

NDT Visual Inspection Question and answers correctly solved 2023 23.6 in; 24 in max - correct answer Which the maximum distance from the part for observation while visual testing? Material type - correct answer If endoscopic device is to be used in VT control, which of the following does...

Visual Testing Introduction to Weld Inspection Questions with complete solution 2023 When is visual examination usually performed relative to other Ndt methods? - correct answer First step What is the minimum number of foot-candles of light recommended for conducting critical VT inspections...

ET ASNT level 1 Question and answers rated A+ 2023 I. A test specimen used as a basis for calibrating test cquipment or as a comparison when evaluating test results is referred to as a: a. null-balancer b. phase shifter . C. reference standard d. high pass filter - correct answer .C. re...

VT TEST 1 Question and answers 100% correct 2023 50 fc to 100 fc - correct answer What is the range of lighting requirements between the various codes? SNT-TC-1A - correct answer personnel can be certified in accordance to which of the following? 9 - correct answer Which ASME secti...

VT Theory Questions (Level II) Question and answers 2023 verified to pass Localized reduction in an area of a bolt that is under overload conditions is referred to as: a. sizing b. necking down c. erosion d. elongation - correct answer b The least common location for fastener failure ...

ASNT Level II Study Guide Question and answers rated A+ 2023 In a normal, healthy eye, the incoming light is focused on the - correct answer retina The component of the eye that responds to light intensity and gives the eye its color is the - correct answer iris If the focal point of ...

Visual Testing Level 2 Question and answers 100% correct 2023 Which of the following are typical of foreign matter which might block the openings of discontinuities if the surface of a test specimen is NOT properly cleaned? A. Paint B. Scale C Core and mold material D. All of the above - corr...