Lote
NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
[Mostrar más]NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
[Mostrar más]Hand tools Exam Questions and Answers 100% Pass 
Another name for a machinist's hammer - Answer- ball-peen hammer 
A heavy-duty took used to drive posts or other large stakes - Answer- sledgehammer 
Proper angle for the edge of a cold chisel - Answer- 60 degrees 
A type of screw shown (square in a ...
Vista previa 1 fuera de 2 páginas
Añadir al carritoHand tools Exam Questions and Answers 100% Pass 
Another name for a machinist's hammer - Answer- ball-peen hammer 
A heavy-duty took used to drive posts or other large stakes - Answer- sledgehammer 
Proper angle for the edge of a cold chisel - Answer- 60 degrees 
A type of screw shown (square in a ...
Module 5 NCCER TEST construction 
drawings 100% Solved 2024 
Plans used for work that has to do with construction in or on the earth are called - 
Answer- Civil Plans 
The material used for the walls would be found in the? - Answer- Structural Plans 
Information in a drawings title block identifies ...
Vista previa 1 fuera de 2 páginas
Añadir al carritoModule 5 NCCER TEST construction 
drawings 100% Solved 2024 
Plans used for work that has to do with construction in or on the earth are called - 
Answer- Civil Plans 
The material used for the walls would be found in the? - Answer- Structural Plans 
Information in a drawings title block identifies ...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
CORE Mod 104 Power Tools Review 1 
Questions and Answers 100% Pass 
What is a Porta-Power tool? 
A)a hydraulic powered tool 
B)a electric tool 
C)a pneumatic tool 
D)a DC battery tool - Answer- A)a hydraulic powered tool 
A power miter saw is a saw that combines a miter box with a circular saw. True...
Vista previa 2 fuera de 5 páginas
Añadir al carritoCORE Mod 104 Power Tools Review 1 
Questions and Answers 100% Pass 
What is a Porta-Power tool? 
A)a hydraulic powered tool 
B)a electric tool 
C)a pneumatic tool 
D)a DC battery tool - Answer- A)a hydraulic powered tool 
A power miter saw is a saw that combines a miter box with a circular saw. True...
NCCER - Power Tools (104 - 6th Edition) Exam 
Questions and Answers 100% Pass 
Before connecting any power tool to a power source, it is critical to ______ - Answer- 
Confirm the power switch is set to OFF 
When using power tools, NEVER engage the ______ - Answer- Trigger Lock 
Before replacing part...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER - Power Tools (104 - 6th Edition) Exam 
Questions and Answers 100% Pass 
Before connecting any power tool to a power source, it is critical to ______ - Answer- 
Confirm the power switch is set to OFF 
When using power tools, NEVER engage the ______ - Answer- Trigger Lock 
Before replacing part...
NCCER Module 9 Introduction to Materials Handling 
Exam Questions and Answers 100% Pass 
What is the proper procedure to lift objects? - Answer- Lift with your legs, keep your 
back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? - Answer-...
Vista previa 1 fuera de 4 páginas
Añadir al carritoNCCER Module 9 Introduction to Materials Handling 
Exam Questions and Answers 100% Pass 
What is the proper procedure to lift objects? - Answer- Lift with your legs, keep your 
back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? - Answer-...
Introduction to Handtools Exam 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is _____? - Answer- Ball-peen hammer. 
The proper angle for the edge of a cold chisel is _____? - Answer- 60 degrees 
How many sides does a hexagon shape have? - Answer- Six 
To quickly run a nut ...
Vista previa 1 fuera de 1 páginas
Añadir al carritoIntroduction to Handtools Exam 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is _____? - Answer- Ball-peen hammer. 
The proper angle for the edge of a cold chisel is _____? - Answer- 60 degrees 
How many sides does a hexagon shape have? - Answer- Six 
To quickly run a nut ...
Power Tools Study Guide with Complete Solutions 
A power miter saw combines a miter box with a? - Answer- Circular saw. 
When using an air wrench, - Answer- keep your body stance balanced. 
The angle grinder is used to grind _______? - Answer- hard, heavy metals. 
An example of an AC source of power...
Vista previa 1 fuera de 2 páginas
Añadir al carritoPower Tools Study Guide with Complete Solutions 
A power miter saw combines a miter box with a? - Answer- Circular saw. 
When using an air wrench, - Answer- keep your body stance balanced. 
The angle grinder is used to grind _______? - Answer- hard, heavy metals. 
An example of an AC source of power...
Core Module 00104-09 Power Tools Exam 
Questions and Answers 100% Pass 
Activate this to make the trigger stay in operating mode even without your finger on the 
trigger. - Answer- Trigger Lock 
Reverses its direction at regularly recurring intervals; this type of current is delivered 
through wall ...
Vista previa 1 fuera de 2 páginas
Añadir al carritoCore Module 00104-09 Power Tools Exam 
Questions and Answers 100% Pass 
Activate this to make the trigger stay in operating mode even without your finger on the 
trigger. - Answer- Trigger Lock 
Reverses its direction at regularly recurring intervals; this type of current is delivered 
through wall ...
Power Tools Exam Questions and 
Answers 100% Pass 
A substance, such as sandpaper, that is used to wear away material. - Answer- 
Abrasive 
An electrical current that reverses its direction at regularly recurring intervals; the 
current delivered through wall plugs. - Answer- AC (alternating current...
Vista previa 1 fuera de 3 páginas
Añadir al carritoPower Tools Exam Questions and 
Answers 100% Pass 
A substance, such as sandpaper, that is used to wear away material. - Answer- 
Abrasive 
An electrical current that reverses its direction at regularly recurring intervals; the 
current delivered through wall plugs. - Answer- AC (alternating current...
Module 0103-15 Introductions to hand tools 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is 
A. Ball-peen hammer 
B. Claw hammer 
C. Veneer hammer 
D. Sledgehammer - Answer- A. Ball-peen hammer 
A heavy-duty tool used to drive posts or other large stakes is a 
A. Mallet 
B...
Vista previa 2 fuera de 6 páginas
Añadir al carritoModule 0103-15 Introductions to hand tools 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is 
A. Ball-peen hammer 
B. Claw hammer 
C. Veneer hammer 
D. Sledgehammer - Answer- A. Ball-peen hammer 
A heavy-duty tool used to drive posts or other large stakes is a 
A. Mallet 
B...
NCCER MODULE 7 ( Bacis communication skills 
Questions and Answers 100% Correct 
in the study of communication, noise is best described as? - Answer- anything that 
interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? - Answer- distant/u...
Vista previa 1 fuera de 1 páginas
Añadir al carritoNCCER MODULE 7 ( Bacis communication skills 
Questions and Answers 100% Correct 
in the study of communication, noise is best described as? - Answer- anything that 
interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? - Answer- distant/u...
NCCER Power Tools Exam Questions and 
Answers 100% Pass 
A tool feature added for convenience that turned out to be very unsafe and should never 
be used is the... - Answer- Trigger Lock. 
Before changing the blade or bit or doing any kind of repair... - Answer- Unplug the 
Tool! 
Before plugging in...
Vista previa 1 fuera de 4 páginas
Añadir al carritoNCCER Power Tools Exam Questions and 
Answers 100% Pass 
A tool feature added for convenience that turned out to be very unsafe and should never 
be used is the... - Answer- Trigger Lock. 
Before changing the blade or bit or doing any kind of repair... - Answer- Unplug the 
Tool! 
Before plugging in...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
NCCER module 6 ( intro to basic rigging 
Questions and Answers 100% Pass 
the max load weight that a sling is designed to carry is the? - Answer- rated capacity 
most alloy steel chain slings can be used in Temps up to? - Answer- 500°F (260°c) 
when a tattle tail has been pulled into the jacket of...
Vista previa 1 fuera de 1 páginas
Añadir al carritoNCCER module 6 ( intro to basic rigging 
Questions and Answers 100% Pass 
the max load weight that a sling is designed to carry is the? - Answer- rated capacity 
most alloy steel chain slings can be used in Temps up to? - Answer- 500°F (260°c) 
when a tattle tail has been pulled into the jacket of...
Power Tools Study Guide with 100% Complete Solutions 
Pneumatic tools get their power from: - Answer- Air pressure. 
The most common use of the power drill is to: - Answer- Make holes in wood, metal, 
and plastic. 
A masonry bit is able to drill into concrete and similar material because it has a: -...
Vista previa 1 fuera de 4 páginas
Añadir al carritoPower Tools Study Guide with 100% Complete Solutions 
Pneumatic tools get their power from: - Answer- Air pressure. 
The most common use of the power drill is to: - Answer- Make holes in wood, metal, 
and plastic. 
A masonry bit is able to drill into concrete and similar material because it has a: -...
NCCER Module 8 (employability skills) 
Questions and Answers 100% Pass 
a companies documented philosophy is called its? - Answer- mission statement 
the time to learn about a potential employer is? - Answer- before an application is ever 
submitted 
when preparing a resume, you should? - Answer- fo...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 8 (employability skills) 
Questions and Answers 100% Pass 
a companies documented philosophy is called its? - Answer- mission statement 
the time to learn about a potential employer is? - Answer- before an application is ever 
submitted 
when preparing a resume, you should? - Answer- fo...
power tools NCCER Exam Questions and 
Answers 100% Pass 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood, 
metal, and plastic 
Hammer drills are design...
Vista previa 1 fuera de 4 páginas
Añadir al carritopower tools NCCER Exam Questions and 
Answers 100% Pass 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood, 
metal, and plastic 
Hammer drills are design...
NCCER Electrical module 2 (electrical safety) 
Questions and Answers 100% Pass 
under strict safety guidelines, which of the following should be used to discharge 
capacitors before working on de-energized circuits. - Answer- safety shorting probe 
for safety, assume that any facility constructed be...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Electrical module 2 (electrical safety) 
Questions and Answers 100% Pass 
under strict safety guidelines, which of the following should be used to discharge 
capacitors before working on de-energized circuits. - Answer- safety shorting probe 
for safety, assume that any facility constructed be...
NCCER Module 3 (Hand Tools) Questions and 
Answers 100% Pass 
what is another name for a machinist hammer? - Answer- Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? - Answer- 
Sledgehammer 
what is the proper angle for the edge of a cold chisel? - Answer- 6...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 3 (Hand Tools) Questions and 
Answers 100% Pass 
what is another name for a machinist hammer? - Answer- Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? - Answer- 
Sledgehammer 
what is the proper angle for the edge of a cold chisel? - Answer- 6...
NCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
NCCER Electrical module 5 (NEC) Exam 
Questions and Answers 100% Pass 
NEC chapter 5 contains? - Answer- specialty occupancy areas 
which of the following serves as the intro to the NEC and provides an overview of the 
book? - Answer- NEC article 90 
organizations that test products for safety are? ...
Vista previa 1 fuera de 1 páginas
Añadir al carritoNCCER Electrical module 5 (NEC) Exam 
Questions and Answers 100% Pass 
NEC chapter 5 contains? - Answer- specialty occupancy areas 
which of the following serves as the intro to the NEC and provides an overview of the 
book? - Answer- NEC article 90 
organizations that test products for safety are? ...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills will not hamm...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 4 (Power tools) Exam 
Questions and Answers 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills will not hamm...
NCCER Module 1 (safety) Questions and Answers 
100% Pass | Verified & Updated 
companies with strong safety cultures usually have lower? - Answer- incident and 
accident rates 
what is a statement regarding safety? - Answer- it's a learned behavior and attitude 
poor lighting, excessive noise, and ...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Module 1 (safety) Questions and Answers 
100% Pass | Verified & Updated 
companies with strong safety cultures usually have lower? - Answer- incident and 
accident rates 
what is a statement regarding safety? - Answer- it's a learned behavior and attitude 
poor lighting, excessive noise, and ...
NCCER Module 9 (material handling) 
Questions and Answers 100% Pass 
before attempting to lift any materials? - Answer- make sure the load does not have 
perusing nails wires or sharp edges 
before attempting to lower an overhead load? - Answer- size up the load 
what is the proper procedure to lift...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 9 (material handling) 
Questions and Answers 100% Pass 
before attempting to lift any materials? - Answer- make sure the load does not have 
perusing nails wires or sharp edges 
before attempting to lower an overhead load? - Answer- size up the load 
what is the proper procedure to lift...
NCCER 2024 Exam Questions Marking Scheme 100% Correct 
NCCER is a ___________ - Answer- not-for-profit 501(c)(3) educational foundation 
Building a safe, productive, and sustainable workforce of craft professionals is 
_________ - Answer- the mission of NCCER 
NCCER standardized curricula have been ...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER 2024 Exam Questions Marking Scheme 100% Correct 
NCCER is a ___________ - Answer- not-for-profit 501(c)(3) educational foundation 
Building a safe, productive, and sustainable workforce of craft professionals is 
_________ - Answer- the mission of NCCER 
NCCER standardized curricula have been ...
NCCER Exam Questions and Answers 100% Pass 
The plane in space where the centrifugal force pushing an object out into space is equal 
to the gravitational force pulling an object toward Earth is called a - Answer- 
geostationary orbit 
A multipoint-to-point satellite uplink/downlink configuration is...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Exam Questions and Answers 100% Pass 
The plane in space where the centrifugal force pushing an object out into space is equal 
to the gravitational force pulling an object toward Earth is called a - Answer- 
geostationary orbit 
A multipoint-to-point satellite uplink/downlink configuration is...
NCCER Module 4 (Power tools) & construction drawings EXAM 
150 QUESTIONS AND CORRECT DETAILED ANSWERS 
(VERIFIED ANSWERS) | ALREADY GRADED A+ 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
mak...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Module 4 (Power tools) & construction drawings EXAM 
150 QUESTIONS AND CORRECT DETAILED ANSWERS 
(VERIFIED ANSWERS) | ALREADY GRADED A+ 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
mak...
NCCER Test Marking Scheme 100% Verified 
A UL listed rod type ground electrode must have minimum length of - Answer- 8'' 
in a circuit of pure capacitance, the current leads the voltage by - Answer- 90 degrees 
The standard unit for measuring the cross sectional area of wire is the - Answer- circu...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Test Marking Scheme 100% Verified 
A UL listed rod type ground electrode must have minimum length of - Answer- 8'' 
in a circuit of pure capacitance, the current leads the voltage by - Answer- 90 degrees 
The standard unit for measuring the cross sectional area of wire is the - Answer- circu...
2x vendido
NCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
power tools NCCER ACTUAL EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS (VERIFIED ANSWERS) 100% Verified 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood...
Vista previa 1 fuera de 4 páginas
Añadir al carritopower tools NCCER ACTUAL EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS (VERIFIED ANSWERS) 100% Verified 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood...
NCCER Hand Tools Questions and Answers 100% Verified 
ball-peen hammer - Answer- another name for a machinist's hammer 
sledge hammer - Answer- a heavy-duty tool used to drive posts or other large stakes 
60 degree angle - Answer- the proper angle for the edge of a cold chisel 
reed and prince - An...
Vista previa 1 fuera de 2 páginas
Añadir al carritoNCCER Hand Tools Questions and Answers 100% Verified 
ball-peen hammer - Answer- another name for a machinist's hammer 
sledge hammer - Answer- a heavy-duty tool used to drive posts or other large stakes 
60 degree angle - Answer- the proper angle for the edge of a cold chisel 
reed and prince - An...
NCCER Module 2 Exam Questions and Answers 100% pass 
An estimator is preparing a bid for a home remodeling project. She has determined that 
the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and 
the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber...
Vista previa 3 fuera de 23 páginas
Añadir al carritoNCCER Module 2 Exam Questions and Answers 100% pass 
An estimator is preparing a bid for a home remodeling project. She has determined that 
the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and 
the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber...
NCCER Core Module 1 Exam 
Questions and Answers 100% Pass 
Companies with strong safety cultures usually have lower? - Answer- Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of 
- Answer- unsafe conditions 
The activity that consists of breaking a job i...
Vista previa 1 fuera de 3 páginas
Añadir al carritoNCCER Core Module 1 Exam 
Questions and Answers 100% Pass 
Companies with strong safety cultures usually have lower? - Answer- Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of 
- Answer- unsafe conditions 
The activity that consists of breaking a job i...
Basic Safety - NCCER EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS 100% Verified 
Apparatus - Answer- An assembly of machines used together to do a particular job 
Arc - Answer- The flow of electrical current through a gas such as air form one pole to 
another pole 
Arc Welding - Answer- The joining ...
Vista previa 2 fuera de 5 páginas
Añadir al carritoBasic Safety - NCCER EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS 100% Verified 
Apparatus - Answer- An assembly of machines used together to do a particular job 
Arc - Answer- The flow of electrical current through a gas such as air form one pole to 
another pole 
Arc Welding - Answer- The joining ...
Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!
Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.
Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable. Así llegas a la conclusión rapidamente!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.
Stuvia is a marketplace, so you are not buying this document from us, but from seller EmilyCharlene. Stuvia facilitates payment to the seller.
No, you only buy this summary for $55.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
45,681 summaries were sold in the last 30 days
Founded in 2010, the go-to place to buy summaries for 14 years now