ICC Soils 90 – 103 Questions and Answers Fully Solved
5 vistas 0 compra
Grado
ICC
Institución
ICC
ICC Soils 90 – 103 Questions and Answers Fully Solved
For ASTM D478, the upper limit of oversize particles in this practice has been set at ____ of the plus No.4 material and ___ of the plus 3/4-inch material.
40%
30%
The minimum required mass of soil for a moisture content test on a No...
the minimum required mass of soil for a moisture c
material rolled into an 18 inch thread and left t
Escuela, estudio y materia
ICC
ICC
Todos documentos para esta materia (233)
Vendedor
Seguir
julianah420
Comentarios recibidos
Vista previa del contenido
ICC Soils 90 – 103 Questions and
Answers Fully Solved
For ASTM D478, the upper limit of oversize particles in this practice has been set at
____ of the plus No.4 material and ___ of the plus 3/4-inch material. - answer40%
30%
The minimum required mass of soil for a moisture content test on a No. 4 sieve shall be
___. - answer300gr
Water content of a specimen shall be reported to the nearest ___. - answer1%
The direct heating source for ASTM D4959 shall raise the specimen temperature to or
above ___°C or ___°F. - answer110
230
Balances for determining the moisture content of soil by direct heating shall have a
capacity of ___ and readable to ___. - answer2kg
0.1g
Material rolled into an 1/8-inch thread and left to air dry will crumble relatively easily if it
is predominantly ___ and harder to break if it is ___. - answerSilt
Clay
When performing a dilute HCI test, a mixture may consiste of __ hydrochloric acid and
___ water solution. - answer20%
80%
The excavatability classification table is based on the "ripping" ability of a ___ with a
single shank to break up the rock for removal. - answerD-9 dozer
When using the split barrel sampler to perform the Standard Penetration Test (SPT) the
total drops taken to drive the sampler the last 12 inches is considered the ___. -
answerN value
When performing a Standard Penetration Test (SPT) and the blow count or N value is 3,
that would be considered a relatively ___ material. - answerDense
If the blow count for any half-foot increment exceeds ___, the distance the sampler was
driven should be measured and recorded, then the split barrel sampler should be
removed from the hole to prevent damage to the driver shoe. - answer50
Los beneficios de comprar resúmenes en Stuvia estan en línea:
Garantiza la calidad de los comentarios
Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!
Compra fácil y rápido
Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.
Enfócate en lo más importante
Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable.
Así llegas a la conclusión rapidamente!
Preguntas frecuentes
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
100% de satisfacción garantizada: ¿Cómo funciona?
Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller julianah420. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for $14.99. You're not tied to anything after your purchase.
