CETA CERTIFICATION FOR STERILE
COMPOUNDING FACILITIES EXAM
2024-2025
According to manufacturer instructions, at what temperature should test equipment
be brought to room temperature before being used? - ANSWER The temperature
ranges are 35°F to 105°F.
What temperature range is usual for applications in a clean room? - ANSWER
from 66° to 70°F.
What is the minimal ACPH that has been set forth for clean rooms used in ISO 7
sterile compounding? - ANSWER 30 ACPH
For an ISO 7 room, what is the lowest ACPH that the air supply passes through the
HEPA filters in the room? - ANSWER 15 ACPH
What is the minimum recommended ACPH from the ANTE Room's HEPA-
filtered air supply? - ANSWER 20 ACPH
What determines the positive pressure room exchange rate? - ANSWER Provide a
flow of air
What determines the negative pressure room exchange rate? - ANSWER Airflow
from the exhaust
, What is determined by measuring the exchange rate? - ANSWER Enough airflow
in both positive and negative pressure rooms to reduce and eliminate airborne
pollutants. As a result, only the supply HEPA-filtered air is used in the air change
measurements required by USP 797; the exhaust return air is not included.
What is the suggested method by the device manufacturer for monitoring air flow
volume using the capture hood? - ANSWER compensate for back pressure
What is compensation for back pressure? - ANSWER It is the culmination of all
forces, including air density and gravity, as well as the resistance brought on by
any drawn-through material, including HEPA filters.
When utilizing an anemometer to measure airflow in a sterile compounding
factory, what is the maximum recommended grid spacing? - ANSWER 1 foot2
Which kind of fog generators produce a fog that is denser than air and don't always
accurately depict the air patterns in real life? - ANSWER water-based, like liquid
nitrogen and carbon dioxide.
What does the industry guidance paper "Sterile Drug Products Produced by
Aseptic Processing - Current Good Manufacturing Practice" say about the FDA's
intentions regarding smoke studies? - ANSWER "In situ air pattern analysis should
be conducted at the critical area to demonstrate unidirectional airflow and
sweeping action over and away from the product under dynamic conditions" .
What minimal pressure differential from adjacent spaces is required for clean
rooms used for nonhazardous compounding according to USP 797? - ANSWER
0.02" with w.c.
Los beneficios de comprar resúmenes en Stuvia estan en línea:
Garantiza la calidad de los comentarios
Compradores de Stuvia evaluaron más de 700.000 resúmenes. Así estas seguro que compras los mejores documentos!
Compra fácil y rápido
Puedes pagar rápidamente y en una vez con iDeal, tarjeta de crédito o con tu crédito de Stuvia. Sin tener que hacerte miembro.
Enfócate en lo más importante
Tus compañeros escriben los resúmenes. Por eso tienes la seguridad que tienes un resumen actual y confiable.
Así llegas a la conclusión rapidamente!
Preguntas frecuentes
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
100% de satisfacción garantizada: ¿Cómo funciona?
Nuestra garantía de satisfacción le asegura que siempre encontrará un documento de estudio a tu medida. Tu rellenas un formulario y nuestro equipo de atención al cliente se encarga del resto.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Boostertips. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for $10.49. You're not tied to anything after your purchase.