Aplusmaster
FOR THE BEST AND LATEST UDPDATES FOR ALL TYPES OF EXAMS, STUDY GUIDES, CASE STUDIES, CLASS DISCUSSIONS. TESTBANKS, ETC. ALSO, FEEL FREE AND WELCOME TO MESSAGE FOR PRE-ORDES, ORDERS OR ASK ANY QUESTION ABOUT MY DOCUMENTS
- 1757
- 0
- 45
Community
- Seguidores
- Siguiendo
84 Comentarios recibidos
1811 artículos
TECHNOLOGY (WELDING) EXAM 3 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 3 COMPLETE WITH CORRECT ANSWERS 1. You notice that a welder is using an unapproved WPS for production tack welding carbon steel, what action would you take? A) Have the tacks removed and MPI the weld preparation for cracking B) Nothing as it is only tack welds and they will probably be removed anyway C) Nothing as long as the WPS covered the material type, wall thickness and diameter D) Give him the correct approved one and allow him to continue as long as the weld...
- Package deal
- Examen
- • 9 páginas •
TECHNOLOGY (WELDING) EXAM 3 COMPLETE WITH CORRECT ANSWERS 1. You notice that a welder is using an unapproved WPS for production tack welding carbon steel, what action would you take? A) Have the tacks removed and MPI the weld preparation for cracking B) Nothing as it is only tack welds and they will probably be removed anyway C) Nothing as long as the WPS covered the material type, wall thickness and diameter D) Give him the correct approved one and allow him to continue as long as the weld...
TECHNOLOGY (WELDING) EXAM 4 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 4 COMPLETE WITH CORRECT ANSWERS 1. How could arc blow be avoided? A) Use AC B) Use DC- C) Use DC+ D) Increase travel speed 2. During a transverse tensile test the first stage the specimen gives through is known as A) Plastic stage B) Elastic stage C) Deformed stage D) UTS stage
- Package deal
- Examen
- • 9 páginas •
TECHNOLOGY (WELDING) EXAM 4 COMPLETE WITH CORRECT ANSWERS 1. How could arc blow be avoided? A) Use AC B) Use DC- C) Use DC+ D) Increase travel speed 2. During a transverse tensile test the first stage the specimen gives through is known as A) Plastic stage B) Elastic stage C) Deformed stage D) UTS stage
TECHNOLOGY (WELDING) EXAM 5 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 5 COMPLETE WITH CORRECT ANSWERS 1. For ultrasonic testing which of the following statements is true? a. It is easy to identify all defects b. The equipment should be calibrated before use c. The equipment cannot be automated d. Sound waves will not travel through copper 2. Which one of these joints would be more susceptible to lamellar tearing? a. U butt b. Vee butt c. Double Vee butt d. Compound weld
- Package deal
- Examen
- • 8 páginas •
TECHNOLOGY (WELDING) EXAM 5 COMPLETE WITH CORRECT ANSWERS 1. For ultrasonic testing which of the following statements is true? a. It is easy to identify all defects b. The equipment should be calibrated before use c. The equipment cannot be automated d. Sound waves will not travel through copper 2. Which one of these joints would be more susceptible to lamellar tearing? a. U butt b. Vee butt c. Double Vee butt d. Compound weld
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS 1. Would you consider using a 5 mm electrode for vertical up root runs in 6G (HLO45) fixed position pipe? a) Yes it is compatible b) Yes but this would depend upon the welder skill c) No, it is not the most suitable electrode coating type d) No, the electrode should have been smaller in diameter 2. A document that is established by consensus and approved by recognized body and provides, for common and repeated use, guidelines, rul...
- Package deal
- Examen
- • 7 páginas •
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS 1. Would you consider using a 5 mm electrode for vertical up root runs in 6G (HLO45) fixed position pipe? a) Yes it is compatible b) Yes but this would depend upon the welder skill c) No, it is not the most suitable electrode coating type d) No, the electrode should have been smaller in diameter 2. A document that is established by consensus and approved by recognized body and provides, for common and repeated use, guidelines, rul...
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS 1. Would you consider using a 5 mm electrode for vertical up root runs in 6G (HLO45) fixed position pipe? a) Yes it is compatible b) Yes but this would depend upon the welder skill c) No, it is not the most suitable electrode coating type d) No, the electrode should have been smaller in diameter 2. A document that is established by consensus and approved by recognized body and provides, for common and repeated use, guidelines, rul...
- Examen
- • 7 páginas •
TECHNOLOGY (WELDING) EXAM 6 COMPLETE WITH CORRECT ANSWERS 1. Would you consider using a 5 mm electrode for vertical up root runs in 6G (HLO45) fixed position pipe? a) Yes it is compatible b) Yes but this would depend upon the welder skill c) No, it is not the most suitable electrode coating type d) No, the electrode should have been smaller in diameter 2. A document that is established by consensus and approved by recognized body and provides, for common and repeated use, guidelines, rul...
TECHNOLOGY (WELDING) EXAM 7 COMPLETE WITH CORRECT ANSWERS
TECHNOLOGY (WELDING) EXAM 7 COMPLETE WITH CORRECT ANSWERS 1. The melting rate of the wire in the GMAW, FCAW processes depends on? A) Voltage per unit length B) Shielding gas flow rate C) Current density D) Ampere per unit length of the wire 2. In a fillet weld fracture test, the specimen is broken with? A) The fillet weld in tension B) The fillet weld in compression C) No specific method needs to be adopted D) Suitable machining
- Package deal
- Examen
- • 7 páginas •
TECHNOLOGY (WELDING) EXAM 7 COMPLETE WITH CORRECT ANSWERS 1. The melting rate of the wire in the GMAW, FCAW processes depends on? A) Voltage per unit length B) Shielding gas flow rate C) Current density D) Ampere per unit length of the wire 2. In a fillet weld fracture test, the specimen is broken with? A) The fillet weld in tension B) The fillet weld in compression C) No specific method needs to be adopted D) Suitable machining
CSWIP (WELDING) 3.1 TESTBANK QUESTIONS WITH CORRECT ANSWERS AND EXPLANATIONS FOR PARTS 1-25
CSWIP (WELDING) 3.1 TESTBANK QUESTIONS WITH CORRECT ANSWERS AND EXPLANATIONS FOR PARTS 1-25 A code give the acceptance standard for excess weld metal “h” as h ≤ 1mm + 0.1b, max. 5mm, where “b” is the width of the weld cap. For which of the following situations is the excess weld metal acceptable? Why is it essential to clean the excess weld metal on completion of the production weld?
- Book & Paket-Deal
- Examen
- • 117 páginas •
CSWIP (WELDING) 3.1 TESTBANK QUESTIONS WITH CORRECT ANSWERS AND EXPLANATIONS FOR PARTS 1-25 A code give the acceptance standard for excess weld metal “h” as h ≤ 1mm + 0.1b, max. 5mm, where “b” is the width of the weld cap. For which of the following situations is the excess weld metal acceptable? Why is it essential to clean the excess weld metal on completion of the production weld?
WELDING INSPECTION-STEEL (WIS 5) EXAM 8 QUESTIONS VERSION 1 TECHNOLOGY
WELDING INSPECTION-STEEL (WIS 5) EXAM 8 QUESTIONS VERSION 1 TECHNOLOGY 1. Burn through may occur because the : a. Current is too high b. Root gap too small c. Root face is too large d. Current is too low 2. Which tungsten electrode is usually used to weld aluminum : a. Zirconiated b. Thoriated c. Large diameter d. Pointed electrode 3. You have noticed several times that a certain welder is having his welds rejected due to poor cap profile. What course of action would to take : a....
- Package deal
- Examen
- • 15 páginas •
WELDING INSPECTION-STEEL (WIS 5) EXAM 8 QUESTIONS VERSION 1 TECHNOLOGY 1. Burn through may occur because the : a. Current is too high b. Root gap too small c. Root face is too large d. Current is too low 2. Which tungsten electrode is usually used to weld aluminum : a. Zirconiated b. Thoriated c. Large diameter d. Pointed electrode 3. You have noticed several times that a certain welder is having his welds rejected due to poor cap profile. What course of action would to take : a....
WELDING INSPECTION-STEEL (WIS 5) EXAM 9 QUESTIONS VERSION 1 TECHNOLOGY
WELDING INSPECTION-STEEL (WIS 5) EXAM 9 QUESTIONS VERSION 1 TECHNOLOGY 1. During inspection of a fillet weld you notice slag in the toes of the weld. What action will you take? a. As a fillet weld does not need to be strong, slag will not be a problem b. Measure slag, if it is less than 3mm it will not be a problem c. Have the welder to remove the slag as this could mask any discontinuity d. Tell the welder to leave the slag in as it will add strength to the fillet weld 2. Which is the m...
- Package deal
- Examen
- • 15 páginas •
WELDING INSPECTION-STEEL (WIS 5) EXAM 9 QUESTIONS VERSION 1 TECHNOLOGY 1. During inspection of a fillet weld you notice slag in the toes of the weld. What action will you take? a. As a fillet weld does not need to be strong, slag will not be a problem b. Measure slag, if it is less than 3mm it will not be a problem c. Have the welder to remove the slag as this could mask any discontinuity d. Tell the welder to leave the slag in as it will add strength to the fillet weld 2. Which is the m...
DOT: COMPREHENSIVE REVIEW FOR NRCME EXAM TO HELP YOU PASS
DOT: COMPREHENSIVE REVIEW FOR NRCME EXAM TO HELP YOU PASS
- Examen
- • 85 páginas •
DOT: COMPREHENSIVE REVIEW FOR NRCME EXAM TO HELP YOU PASS
NUR 190 PA Final Exam, Midterm exam, Quizzes and Study Guide
2023 (NGN) NEW GENERATION NCLEX QUESTIONS AND ANSWERS FOR NCLEX PN COMPLETE 150 QUESTIONS AND ANSWERS
ATI MED SURG PROCTORED EXAM 2023 REAL EXAM QUESTIONS WITH WELL DETAILED AND EXPLANED ANSWER KEY. BEST STUDY MATERIAL TO HELP YOU PASS
WGU C172 Network and Security Foundations Final Exam Testbank Questions and Answers Verified A+ Material
Florida Civic Literacy Exam (FCLE) 2024