Classhero

What is jurisdiction is California primarily under? - Federal What is the minimum diameter hose size for wildland, WUI, and vehicle fires? - 1 1/2 inch What is the minimum diameter hose size for structure fires? - 1 3/4 inch What does the first S in S-FACTS stand for? - Survival What does the F in S-FACTS stand for? - Fire environment What does the A in S-FACTS stand for? - Access What does the C in S-FACTS stand for? - Construction/ Clearance What does the T in S-FACTS stand for? - Time ...

The board consists of how many members? - 7 How long is the term that the board members serve - 3 years How many board members serve from each congressional district? - 1 member from each of the 4 congressional districts How many board members should be licensed funeral director/embalmers with 5 consecutive years of active experience? - 5 How are the board members appointed? - The Governor shall appoint members to the board from 3 nominees submitted by the licensed funeral director/embalm...

Which valve is between the boiler and the return pump? - Check Valve What is the function of the check valve? - To prevent the water from returning to the condensation tank from the boiler after the pump shuts off. Four safety features required on the steam boiler are: - Safety relief valve, blow-down valve, low water cut-off, and pressure gauge. Safety relief valves should be set by: - Qualified safety valve technician/firm. Which pressure is considered to be that of a low-pressure boiler...

Which valves are located between the boiler and the feedwater pump? - Feedwater Stop Valve and Feedwater Check Valve What is the function of the Check Valve? - To prevent the boiler pressure from forcing the boiler water back into a feedwater tank or deaerator when the pump shuts off. (Allows flow in only one direction) The 4 safety features required on a steam boiler is: - Safety Relief Valve, Blow Down Valve, Low Water Cut-off, Pressure Gauge Safety Relief Valves should be set by a: - Q...

According to the FBI Uniform crime report, a burglary occurs every - 14.4 seconds Most residential burglaries occur - in broad daylight The common goal of the electronic security and life safety industry is to - improve the safety, peace of mind, and quality of life of the customer CSAA is the acronym for - Central station alarm association An alarm company yard sign is - a good burglar deterrent Hiding a spare key to your house outside is - not recommended A successful service technician...

The _ defines standard activities that are performed by the IC to achieve the tactical objectives - Functions of Command Command is _____ to improve the quality of the command organization - Transferred _____level involves the overall command of the incident - Strategic The _ level is responsible for determining the appropriate strategy. (offensive/defensive) - Strategic The accumulated achievements of task level activities should accomplish_ - Tactical objectives During offensive fires __...

When using a rotary saw, start all cuts at rpm to prevent blades from binding into the material. - maximum is an example of a common prying tool. - halligan An swinging door is indicated by the hinges being visible. - outward is an example of a pulling tool. - sheetrock rake The and the are commonly paired together as "irons". - halligan Flat head axe When breaking glass, stand , use the side of the tool and strike the of the pane. - up-wind blunt/flat corner When getting a power tool ...

The goal of the National Fallen Firefighters Foundation is to reduce fatalities by twenty- five percent within five years and by ___ in ten years. Select one: a. 30% b. 10% c. 50% d. 15% - c. 50% Which of the following NFPA® standards establishes the design criteria for protective clothing and equipment? Select one: a. 1851 b. 1582 c. 1403 d. 1977 - d. 1977 Firefighters should ___ and put all tools in a ready state before storing. Select one: a. Inspect, clean, b. Modify as nee...

Any allegation of abuse is investigated and reported to the APS within _______ of the allegation - 2 hours Fire drill documentation must be provided to ADHS within ________ of request - 2 hours A facility disaster must be reported to DHS within _________ - 2 hours or next business day Anything requested by Department of Health must be provided within _________ - 2 hours All staff providing direct care must attend _________ hours of in service - 12 hours every 12 months Injury, disaster, or...

Staff members must attend _________ hours of in-service every year - 12 hours Anything requested by department of health must be provided within ______ hours - 2 hours 3 meals each day with not more than ________ hours between the evening and breakfast meals unless a snack is provided and resident group agrees - 14 hours If a snack (meat, fish, eggs, cheese, or other protein) is provided between meals how long can the time be extended to - 16 hours Injury from unknown source reported to de...