Garantie de satisfaction à 100% Disponible immédiatement après paiement En ligne et en PDF Tu n'es attaché à rien
logo-home
SAN3701 (Structural Analysis IV) Project Solutions 2024 €15,86   Ajouter au panier

Examen

SAN3701 (Structural Analysis IV) Project Solutions 2024

 276 vues  14 achats
  • Cours
  • Établissement

Distinction Guaranteed (Excel programs are available)

Aperçu 6 sur 28  pages

  • 30 juin 2024
  • 28
  • 2023/2024
  • Examen
  • Questions et réponses
avatar-seller
Structural Analysis IV

Project Solutions

2024




0027 65 934 4052

,TABLE OF CONTENTS



1.0 INTRODUCTION .......................................................................................................... 3

2.0 SCOPE OF THE PROJECT ........................................................................................... 3

3.0 ANALYSIS OF STRUCTURAL ELEMENTS AND RESULTS ................................. 6

,1.0 INTRODUCTION
Structural analysis and design is important as it focuses on the critical parts that need special
attention. Loads act on a structure in different directions. In structural design, worst case
loading conditions which result into the highest stresses are used to analyse a structure. Parts
of the structure that experience high Von –Mises stress or high buckling are isolated for further
analysis.

Engineering principles mainly used in this analysis derives knowledge from the following
topics:

 Statics
 Strength of materials
 Machine elements
 Material selection



2.0 SCOPE OF THE PROJECT
The project focuses on structural analysis of various structural elements using relevant
software tools and engineering principles. The following questions will be answered:

,
,
, 3.0 ANALYSIS OF STRUCTURAL ELEMENTS AND RESULTS


A1


Damping factor calculations
Load from the fluid9.8 kN
Height of wall 22.5 m
Tank diameter 100 m
Thickness of wall 0.8 m
Poisson's ratio 0
finite beam



ANALYSIS FOR FINITE BEAM CASE


Step 1

Calculations for µ
µ= 0.20808957
µL= 4.68201538

Step 2

Based on the boundary conditions at x = 0, the bending moment M = 0 and the equation 5.5 SG can be simplified to (A1-B1=0).
This is equation 01 for the matrix formation

Based on the boundary conditions at x = 0, the shear force V = 0 and the equation 5.6 SG can be simplified to (-A1-A2-B1+B2=0).
This is equation 02 for the matrix formation

From equation 5.3 SG the deflection distribution is given. It can be calculated from the coefficients for A1, A2, B1, and B2. These
coefficients will form part of the equation 03 for the matrix formation .

Calculation for coefficient equation 03

Coefficient A1= -0.00925606
Coefficient A2= -0.00028123 4E µ^4v-q= -220.5
Coefficient B1= -107.93768101
Coefficient B2= -3.27946438

From equation 5.4 SG the slope distribution is given. It can be calculated from the coefficients for A1, A2, B1, and B2. These
coefficients will form part of the equation 04 for the matrix formation.

Calculation for coefficient equation 04

Coefficient A1= 0.0089748343
Coefficient A2= 0.0095372871 4EI µ^3(dq/dx)-1/µ(dq/dx)= -47.09510372
Coefficient B1= -111.2171453858
Coefficient B2= 104.6582166307

Les avantages d'acheter des résumés chez Stuvia:

Qualité garantie par les avis des clients

Qualité garantie par les avis des clients

Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.

L’achat facile et rapide

L’achat facile et rapide

Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.

Focus sur l’essentiel

Focus sur l’essentiel

Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.

Foire aux questions

Qu'est-ce que j'obtiens en achetant ce document ?

Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.

Garantie de remboursement : comment ça marche ?

Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.

Auprès de qui est-ce que j'achète ce résumé ?

Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur TrustAcademy. Stuvia facilite les paiements au vendeur.

Est-ce que j'aurai un abonnement?

Non, vous n'achetez ce résumé que pour €15,86. Vous n'êtes lié à rien après votre achat.

Peut-on faire confiance à Stuvia ?

4.6 étoiles sur Google & Trustpilot (+1000 avis)

72841 résumés ont été vendus ces 30 derniers jours

Fondée en 2010, la référence pour acheter des résumés depuis déjà 14 ans

Commencez à vendre!
€15,86  14x  vendu
  • (0)
  Ajouter