austenite - Answer-face-centered cubic iron
cementite - Answer-iron carbide (Fe3C) as a phase in steel
ferrite - Answer-body-centered cubic iron
pearlite - Answer-a phase in steel composed of alternating layers of Fe3C (cementite) and ferrite
eutectic - Answer-a phase with a single melt...
MMET 207 Exam Questions with Correct
Answers
austenite - Answer-face-centered cubic iron
cementite - Answer-iron carbide (Fe3C) as a phase in steel
ferrite - Answer-body-centered cubic iron
pearlite - Answer-a phase in steel composed of alternating layers of Fe3C (cementite)
and ferrite
eutectic - Answer-a phase with a single melting temperature
(liquidus and solidus lines meet-not at the axis)
eutectoid - Answer-a solid phase with a single transition temperature to another solid
allotropic - Answer-material has the ability to change crystal structure
rimmed steel - Answer-slightly deoxidized steels that solidify with an outer shell on the
ingot which is low in impurities and very sound; can retain a good finish, even after
severe deforming because of the surface cleanliness
killed steel - Answer-strongly deoxidized, usually by chemical additions to the melt
galvanized - Answer-zinc-coated steel products; the zinc is applied by hot dipping
sheet - Answer-rolled steel primarily in the thickness range of 0.010 to 0.25 in and with
a width of 24 in or more
bar - Answer-hot- or cold-rolled rounds, squares, hexes, rectangles and small shapes;
round bars can be as small as 0.25 in; flats can have a minimum thickness of .203 in;
shapes have a maximum dimension less than 3 in
coil - Answer-rolled steel in the thickness range of sheet or strip
flat wire - Answer-small hot- or cold-rolled rectanges, often by cold-reducing rounds to
rectangular shape
wire - Answer-hot- or cold-drawn coiled rounds in varying diameters, usually not
exceeding 0.25
shapes - Answer-hot-rolled I-beams, channels, angles, wide-flange beams, and other
structural shapes;at least one dimension of the cross section is greater than 3 in
, tin plate - Answer-cold-rolled steel with a usual thickness range of 0.005 to 0.014 in; it
may or may not be tin-coated
strip - Answer-rolled steel primarial in the thickness range of 0.010 to 0.25 in and with a
width of less than 24 in
plate - Answer-steel shapes over 0.18 in thick, over 24 in wide and over 0.230 in thick
over 6 in wide, in addition to weight requirements
free machining - Answer-steels with additions of sulfur, lead, selenium, or other
elements in sufficient quantity that they machine more easily than untreated grades
drawing quality - Answer-hot- or cold-rolled steel, specially produced or selected to
satisfy the elongation requirements of deep drawing operations
merchant quality - Answer-steels with an M suffix on the designation intended for non-
structural applications; low quality material
commercial quality - Answer-steels produced from standard rimmed, capped, concast or
semikilled steel. These steels may have significant segregation and variation in
composition, and the are not made to guaranteed mechanical property requirements;
most widely used grade
H Steel - Answer-Steels identified by an H suffix on the designation and made to a
guaranteed ability to harden to a certain depth in heat treatment
B Steels - Answer-Steels with small Boron additions as a hardening agent, there are
identified by a B inserted between the first two and last two digits in the four-digit
identification number (xx B xx)
Pickling - Answer-use of acids to remove oxides and scale on hot-worked steels
Temper Rolling - Answer-Many steels will exhibit objectionable strain lines when drawn
or formed. Temper rolling involves a small amount of roll reduction as a final
p=operation on annealed material to eliminate stretcher strains. This process
sometimes is used to improve the surface finish on a steel product
Temper - Answer-the amount of cold reduction in a rolled sheet and strip
E steels - Answer-Steels with an E prefix on the designation are melted by electric
furnace
nonmetallic inclusions - Answer-oxides, silicates, sulfides, or aluminas that form during
conventional melting and refining
Les avantages d'acheter des résumés chez Stuvia:
Qualité garantie par les avis des clients
Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.
L’achat facile et rapide
Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.
Focus sur l’essentiel
Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.
Foire aux questions
Qu'est-ce que j'obtiens en achetant ce document ?
Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.
Garantie de remboursement : comment ça marche ?
Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.
Auprès de qui est-ce que j'achète ce résumé ?
Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur lectknancy. Stuvia facilite les paiements au vendeur.
Est-ce que j'aurai un abonnement?
Non, vous n'achetez ce résumé que pour €9,67. Vous n'êtes lié à rien après votre achat.