Radiographic Image Analysis 5th Edition Martensen Test Bank
Complete Test Bank Radiographic Image Analysis 5th Edition Martensen Questions & Answers with rationales (Chapter 1-12)
PDF File
All Pages
All Chapters
Grade A+
GRADEXAM
radiographic image analysis 5th edition martensen test bank
radiographic image analysis 5th edition martensen
radiographic image analysis 5th edition
radiographic image analysis
Gekoppeld boek
Titel boek:
Auteur(s):
Uitgave:
ISBN:
Druk:
Meer samenvattingen voor studieboek
Complete Test Bank Radiographic Image Analysis 5th Edition Martensen Questions & Answers with rationales (Chapter 1-12)
Complete Test Bank Radiographic Image Analysis 5th Edition Martensen Questions & Answers with rationales (Chapter 1-12)
Test Bank for Radiographic Image Analysis 5th Edition Martensen Chapter 1 - 12 Updated Guide 2022
Alles voor dit studieboek (4)
Geschreven voor
Radiographic
Radiographic
8
beoordelingen
Door: redjay6 • 2 maanden geleden
Door: ryannewalton • 5 maanden geleden
Door: miri_cano • 6 maanden geleden
Door: gradexam • 5 maanden geleden
We sincerely appreciate your outstanding 5-star review of this document. Your feedback means a great deal to us!
Door: amandareyes0731 • 6 maanden geleden
Door: gradexam • 5 maanden geleden
We sincerely appreciate your outstanding 5-star review of this document. Your feedback means a great deal to us!
Door: pam354136 • 8 maanden geleden
Door: gradexam • 8 maanden geleden
Thank you
Door: kass6wilson • 11 maanden geleden
Door: suava_zaman • 1 jaar geleden
Door: gradexam • 11 maanden geleden
We sincerely appreciate your outstanding 5-star review of this document. Your feedback means a great deal to us!
Bekijk meer beoordelingen
Verkoper
Volgen
gradexam
Ontvangen beoordelingen
Voorbeeld van de inhoud
Radiographic Image Analysis 5th Edition Martensen Test Bank Chapter 01: Guidelines for Image Analysis Martensen: Radiographic Image Analysis, 5th Edition MULTIPLE CHOICE 1. The patient demographic requirements for radiographic images include all of the following except a. patient and facility identification. b. time and date. c. birth date. d. technologist’s identification. ANS: D 2. Which of the following is true about image markers? 1. They are radiopaque. 2. They should be reversed before being placed on the IR. 3. They should be positioned as close to the median plane as possible. 4. They will be magnified if positioned on the imaging table or patient. a. 1 only b. 1 and 4 only c. 2 and 3 only d. 4 only ANS: B 3. What is the m arker pl acemenNt UfoRr tSheIpNrGojTecBtio.nCoOf Mlateral vertebrae? a. Laterally on the side being identified b. Anteriorly, identifying the side positioned closer to the IR c. Anywhere within exposure field d. Laterally, identifying the side situated closer to the IR ANS: B 4. What is the marker placement for the projection of PA cranium? a. Laterally on the side being identified b. Anterior ly, identifying the side positioned closer to the IR c. Anywhere within the exposure field d. Laterally, identifying the side situated closer to the IR ANS: A 5. What is the marker placement for the projection of PA oblique vertebrae? a. Laterally on the side being identified b. Anteriorly, identifying the side positioned closer to the IR c. Anywhere within the exposure field d. Laterally, identifying the side situated closer to the IR ANS: D 6. What is the marker placement of the projection of lateral hand? a. Laterally on the side being identified b. Anteriorly, identifying the side positioned closer to the IR c. Anywhere within the exposure field d. Laterally, identifying the side situated closer to the IR ANS: C 7. Which guideline should be used to position the identification (ID) plate? a. Place the ID plate within the collimated field whenever possible. b. Position the ID plate toward the direction in which the central ray was angled. c. Position the ID plate next to the narrowest anatomic structure. ANS: C 8. Good collimation practices will do all of the following except a. decrease the radiation dosage. b. affect the amount of scatter radiation that reaches the IR. c. reduce the visibility of recorded details. d. reduce digital radiography histogram analysis errors. ANS: C 9. Elongation occurs in all of the following situations except when the a. part is off-center. b. central ray is angled with the part. c. central ray and part are perpendicular but the IR is angled. d. central ray and IR are perpendicular and the part is angled. ANS: D 10. For an open joint space to be obtained, the central ray must be aligned to the joint. a. perpendicular b. parallel c. 5 degrees cephalic for each 4 inches of tissue thickness d. 5 degrees caudal for each 4 inches of tissue thickness ANS: B 11. When the central ray is angled, the structure situated is projected the most. a. farther away from the IR b. closer to the IR c. proximal to the tube d. distal to the tube ANS: A 12. Three images were obtained on the same structure with a computed radiography system. Image 1 was obtained using a 48 -inch source –image receptor distance (SID) and a 5 -inch object –image receptor distance (OID); image 2 was obtained using a 48 -inch SID and a 3-inch OID; and image 3 was obtained with a 48 -inch SID, a 3 -inch OID, and a larger IR. Which image will demonstrate the sharpest recorded detail? a. Image 1 b. Image 2 c. Image 3 d. There will be no difference in recorded detail. ANS: B 13. Three images were obtained on the same structure with a computed radiography system. Image 1 was obtained using a 48 -inch source –image receptor distance (SID) and a 5 -inch object –image receptor distance (OID); image 2 was obtained using a 48 -inch SID and a 3-inch OID; and image 3 was obtained with a 48 -inch SID, a 3 -inch OID, and a larger IR. Which image will demonstrate the greatest size distortion? a. Image 1 b. Image 2 c. Image 3 d. There will be no difference in size distortion. ANS: A 14. A small focal spot should be used for each of the following situations except when a. fine detail demonstration is important. b. extremities are imaged. c. the milliamperage setting is above 300. d. the patient can control motion. ANS: C 15. An image demonstrating motion and adequate density was obtained using 100 mA at 0.5 seconds. If the time is changed to 0.25 seconds, what mA should be used to maintain density? a. 100 mA b. 200 mA c. 300 mA d. 400 mA ANS: B 16. Anatomical relationships are affected by 1. varying degrees of patient obliquity and flexion. 2. off-centering. 3. geometrical factors of magnification, elongation, and foreshortening. 4. similar structures of shape and size. a. 1 and 4 only b. 1, 2, and 4 only c. 1, 3, and 4 only d. All of the above ANS: D 17. Good collimation practices result in which of the following? 1. Reduces histogram analysis errors 2. Clearly delineates the VOI 3. Improves the visibility of recorded details by reducing the amount of scatter radiation that reaches the IR 4. Decreases the radiation dosage by limiting the amount of scatter from the patient a. 2 and 3 only b. 1, 2, and 3 only c. 1, 2, and 4 only d. 1, 2, 3, and 4 ANS: B 18. Minimizing size distortion is accomplished by which of the following? 1. Using the longest feasible SID 2. Using the shortest possible OID 3. Decreasing the angle of the CR 4. Placing the part as close to the IR as possible a. 2 and 3 only b. 1, 2, and 3 only c. 1, 2, and 4 only d. 1, 2, 3, and 4 ANS: C 19. Collimation guidelines include all of the following except for 1. chest and abdomen projections, collimate to within 1 inch (2.5 cm) of the patient’s skin line. 2. extremity projections, collimate to within 0.5 inch (1.25 cm) of the skin line of the thickest VOI. 3. chest and abdomen projections, collimate to within 0.50 inch (1.25 cm) of the IR edge. 4. collimating structures within the torso, bring the collimated borders to within 1 inch (2.5 cm) of the VOI. a. 1 and 3 b. 2 and 4 c. 3 only d. 4 only ANS: B 20. The medial and lateral femoral condyles are not superimposed on a lateral knee projection. The larger, lateral condyle is 1 inch (2.5 cm) anterior to the medial condyle. The best way to correct this error is to a. rotate the medial condyle 1 inch (2.5 cm) anteriorly. b. rotate the medial condyle 0.5 inch (1.25 cm) anteriorly. c. increase the CR angle to accommodate for the larger condyle. d. increase the CR angle to magnify the smaller condyle. ANS: B 21. When imaging long bones, which of the following is (are) correct statement(s)? 1. Choose a large enough IR so that one or both joints are included on the projection. 2. Extend the collimation field so it extends 1 to 2 inches (2.5 cm to 5 cm) beyond the joints spaces as required. 3. Histogram errors may occur if the system algorithm does not recognize a diagonal exposure field. 4. Align the long bone parallel to the IR to prevent a histogram analysis error.
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
√ Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, Bancontact of creditcard voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper gradexam. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €16,55. Je zit daarna nergens aan vast.
