100% tevredenheidsgarantie Direct beschikbaar na je betaling Lees online óf als PDF Geen vaste maandelijkse kosten
logo-home
Eerder door jou gezocht
Eerder door jou gezocht
logo
COLLATERAL DUTY INSPECTOR (CDI) MINIMUM OJT TRAINING SYLLABUS (FRC ATS) Terms in this set (48) COMNAVAIRFORINST 4790.2B CH-1 NAMP Instruction, Overview of the NAMP, and Organization for Naval Aviation Maintenance COMNAVAIRFORINST 4790.2B CH-6 Produc €9,80
In winkelwagen
Snel navigeren naar
Voorbeeld
  2.  
  3. CGAP - Certified Government Auditing Professional
  4.  
  5. CGAP - Certified Government Auditing Professional

Tentamen (uitwerkingen)

COLLATERAL DUTY INSPECTOR (CDI) MINIMUM OJT TRAINING SYLLABUS (FRC ATS) Terms in this set (48) COMNAVAIRFORINST 4790.2B CH-1 NAMP Instruction, Overview of the NAMP, and Organization for Naval Aviation Maintenance COMNAVAIRFORINST 4790.2B CH-6 Produc
 0 keer verkocht
  • Vak
  • CGAP - Certified Government Auditing Professional
  • Instelling
  • CGAP - Certified Government Auditing Professional

COLLATERAL DUTY INSPECTOR (CDI) MINIMUM OJT TRAINING SYLLABUS (FRC ATS) Terms in this set (48) COMNAVAIRFORINST 4790.2B CH-1 NAMP Instruction, Overview of the NAMP, and Organization for Naval Aviation Maintenance COMNAVAIRFORINST 4790.2B CH-6 Production Divisions; Work Center Superviso...

[Meer zien]

Voorbeeld 2 van de 5  pagina's

Document informatie

  • 7 augustus 2024
  • 5
  • 2024/2025
  • Tentamen (uitwerkingen)
  • Vragen en antwoorden

Onderwerpen

  • collateral duty inspector cdi minimum ojt train

Geschreven voor

  • CGAP - Certified Government Auditing Professional
  • CGAP - Certified Government Auditing Professional

Verkoper

avatar-seller
Denyss

Ontvangen beoordelingen

Voorbeeld van de inhoud

8/7/24, 4:44 AM



COLLATERAL DUTY INSPECTOR (CDI) MINIMUM OJT
TRAINING SYLLABUS (FRC ATS)
Jeremiah




Terms in this set (48)

NAMP Instruction, Overview of the NAMP, and Organization for Naval Aviation
COMNAVAIRFORINST 4790.2B CH-1
Maintenance

Production Divisions; Work Center Supervisor; Maintenance Training; and Training,
COMNAVAIRFORINST 4790.2B CH-6
Special Process Certification and Licensing

COMNAVAIRFORINST 4790.2B CH-7 Quality Assurance (QA)

COMNAVAIRFORINST 4790.2B CH-10 Naval Aviation Maintenance Program Standard Operating Procedures (NAMPSOPs)

I-Level Maintenance Data System (MDS) Functions, Responsibilities and Source
COMNAVAIRFORINST 4790.2B CH-16
Document Procedures

COMNAVAIRFORINST 4790.2B appendix-E Maintenance Documentation Codes

NAVAL AIR SYSTEMS COMMAND
NAVAIR 00-25-100 TECHNICAL PUBLICATIONS LIBRARY
MANAGEMENT PROGRAM (CTPL)

NAVAIR 00-25-100 WP12 TECHNICAL PUBLICATION UPDATE METHODS

CENTRAL/DISPERSED TECHNICAL PUBLICATIONS LIBRARY OPERATING
NAVAIR 00-25-100 WP13
PROCEDURES

NAVAIR 00-25-100 WP16 REFERENCES (CTPL)

NAVAIR 00-25-100 WP18 DEFINITION OF TERMS (CTPL)

TECHNICAL DIRECTIVES SYSTEM / TECHNICAL DIRECTIVE REQUIREMENTS AND
NAVAIR NA-00-25-300 (SECTION III)
PROCEDURES

NAVAIR 01-1A-509-1 CORROSION PROGRAM AND CORROSION THEORY

NAVAIR 01-1A-509-2 AIRCRAFT CORROSION CONTROL

NAVAIR 01-1A-509-3 AVIONICS AND ELECTRONICS CORROSION CONTROL

SE CLEANING, PRESERVATION AND CORROSION
NAVAIR 17-1-125 SECTION XI
CONTROL / PRESERVATION AND DEPRESERVATION OF SUPPORT EQUIPMENT (SE)

Concept of Quality Assurance The prevention of the occurrence of defects.




1/5

, 8/7/24, 4:44 AM
Attaining quality in maintenance and the prevention of maintenance errors is an all
individual responsibilities with respect to
hands task. QA requirements, functions, and responsibilities provide a sound basis for
quality in maintenance
conducting an effective QA.

Shall inspect all work and comply with the required QA inspections during all
maintenance actions performed by their respective work centers. CDIs are responsible
Collateral Duty Inspectors (CDIs) to the QA Officer when performing QA functions. CDIs shall spot check all work in
progress and be familiar with the provisions and responsibilities of the various
programs managed and audited by QA.

Normally conducted by CDIs to determine the condition of material, proper
Receiving or screening inspections identification, maintenance requirements, and disposition and accuracy of
accompanying records and documents.

Specific QA functions required during the performance of maintenance requirements
and actions where satisfactory task performance cannot be determined after the task
In-process inspections has been completed.
(witnessing application of torque, functional testing, adjusting, assembly, servicing, and
installation.)

Specific QA functions performed following the completion of a task or series of tasks
Final inspection when the proper performance of a task can be determined by a visual inspection after
the task is complete.

The supervisor's name in the supervisor field signifies completion of the maintenance
action, verification that tool control inventories were conducted at the proper intervals,
responsibilities when signing the "inspected
the component was adequately preserved and secured for routing to the AMSU,
by" block of the VIDS/MAF
documentation is correct, and QA measures were adhered to.
Ref: 16.1.3.6 (c)

QA Inspection
This code is used when a need for maintenance is discovered during any receiving,
When discovered code "R"
screening, in-process or final QA inspection (scheduled or unscheduled) conducted by
personnel acting in the capacity of QAR, CDQAR, or CDI.

a. CTPL.
b. Maintenance Department/Division Safety.
Quality Assurance (QA) Program c. Quality Assurance Audit Program (Chapter 10, paragraph 10.7).
Management d. SE Misuse/Abuse.
e. Aircraft Confined Space Program (Chapter 3).
f. NAMDRP (Chapter 10, paragraph 10.9).

Types of inspections that cannot be CDIs shall not inspect their own work and sign as inspector or when QAR is specifically
performed by a CDI required.

sets issued by COMNAVAIRSYSCOM containing scheduled maintenance requirements
MRC - MAINTENANCE REQUIREMENT
applicable to I-level and O-level activities for the specific aircraft/SE for which they are
CARD
issued.




2/5

Dit zijn jouw voordelen als je samenvattingen koopt bij Stuvia:

Bewezen kwaliteit door reviews

Bewezen kwaliteit door reviews

Studenten hebben al meer dan 850.000 samenvattingen beoordeeld. Zo weet jij zeker dat je de beste keuze maakt!

In een paar klikken geregeld

In een paar klikken geregeld

Geen gedoe — betaal gewoon eenmalig met iDeal, creditcard of je Stuvia-tegoed en je bent klaar. Geen abonnement nodig.

Direct to-the-point

Direct to-the-point

Studenten maken samenvattingen voor studenten. Dat betekent: actuele inhoud waar jij écht wat aan hebt. Geen overbodige details!

Veelgestelde vragen

Wat krijg ik als ik dit document koop?

Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.

Tevredenheidsgarantie: hoe werkt dat?

Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.

Van wie koop ik deze samenvatting?

Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper Denyss. Stuvia faciliteert de betaling aan de verkoper.

Zit ik meteen vast aan een abonnement?

Nee, je koopt alleen deze samenvatting voor €9,80. Je zit daarna nergens aan vast.

Is Stuvia te vertrouwen?

4,6 sterren op Google & Trustpilot (+1000 reviews)

Afgelopen 30 dagen zijn er 67418 samenvattingen verkocht

Opgericht in 2010, al 15 jaar dé plek om samenvattingen te kopen

Begin nu gratis

Laatst bekeken door jou

Tentamen (uitwerkingen) ·

(0)

BS 161 EXAM 2 NEWEST EXAM COMPLETE 200 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+

Tentamen (uitwerkingen) ·

(0)

MATH 221 Week 1 Homework: Statistics for Decision-Making (100% Correct solution)

€9,80
  • (0)
In winkelwagen
Toegevoegd