As a tester - Study guides, Class notes & Summaries

Michigan Mechanic Certification- HVAC Latest Update Graded A+ Cooling system leak diagnosis Pressure test or dye test Purpose of a radiator The purpose of the radiator is to dissipate heat that is picked up by coolant in the engine into the air passing through its fins and tubes Symptoms of low coolant Engine overheating and no heat from the HVAC system Purpose of the thermostat The purpose of the thermostat is to trap the coolant in the engine until it reaches it operating temperature C...

FULL NHIE EXAM PRACTICE - Questions and Answers (Complete Solutions) Where you have found evidence of footing settlement, how can you predict whether there will be further settlement? (a) You can count the number of planes of movement. (b) You can determine the type of foundation material. (c) You cannot predict settlement from a single inspection. (d) You can determine the depth of the footing. You typically identify a Freon leak (a) As an oil stain (b) As refrigerant coming out of the Freon ...

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

NCTI Final Exam: Progression Field Tech 2- 3 Exam| New Update 2023/ 2024|Verified Questions and Answers 1. What would be the downstream throughput if two QAM channels with a throughput of 38 Mbps were bonded?  Answer: 76 Mbps. 2. What are two features that were added in DOCSIS 3.1 to extend the viability of HFC networks into the next decade?  Answer: OFDM and LDPC. 3. Which step in the troubleshooting process requires a discussion with the customer to gather more...

NCCER Electrical module 3 (intro to electrical circuits) Exam Questions And Answers All Verified a circuit has a source voltage of 50v and a current of 10A, what is the power in watts? - ANS 500w voltage is defined as the? - ANS driving force that makes current flow in a circuit if a circuit has 12 amps of current and the resistance is 20 ohms, the applied voltage is? - ANS 240 volts if two 10 ohm resistors are connected in series, what is the total resistance of the resistors? ...

Spill containers must be tested no less than _______________ to demonstrate that it is capable of containing the hazardous substances until it is detected and cleaned up. a.) Every 6 months b.) Every 36 months c.) Every 12 months d.) At the time of install or replacement - correct answers c.) Every 12 months H&SC, Sec 25284.2 All the following components require third party certification, except: a.) Automatic tank gauging systems b.) Statistical inventory reconciliation methods c.) ...

NICET Level 1 inspection and Testing Exam 2024 When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... -Answer-80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested -Answer-10% When testing elevator recall, the elevator should go to the alternate level when: -Answer-The lobby smoke detector on the recall level is activated Minimum requirement for system docu...

Class A/B Operator for Underground Storage Tank questions and answers The Class A and Class B certification must be renewed every: - 5 years UST financial responsibility requirements apply to what? - 600 gallon used oil tank Secondary Containment is required for what? - New UST Systems, Piping in contact with the ground, and Replacement UST A Class A operator shall maintain the records of UST site inspections for a *minimum* of: - 3 years New owners of an existing UST system shall regist...

WATER DISTRIBUTION GRADE 1 CERTIFICATION ADEQ PRACTICE EXAM NEW GUIDE QUESTIONS AND ANSWERS COMPLETE GUIDE MATERIAL What is the general definition of an ion? An _________ with a positive or negative charge - ANS Atom A continuous positive pressure in a distribution system is essential for preventing what event? - ANS Backflow Event _____________ water pressure must be maintained to ensure adequate customer service during peak flow periods. However, minimum positive pressure must be main...

Texas Wastewater Class A Texas Wastewater A ( Test 2) Latest Update Questions and 100% Verified Correct Answers Guaranteed A+