Astm standards base Study guides, Class notes & Summaries

3.1 Contractors In the absence of specific requirements in the governing design standard , at the option of the engineer what other standards shall the contractor be certified too ? If no standard is required what shall the contractor prove ? - W47.1 The contractor must prove their compentency to the engineer. 3.1.2 Welding processes What processes are covered by this standard ? - SMAW, GMAW, MCAW, FCAW, SAW, ESW, EGW, SW Filler metals and allied materials are classified under what standa...

NACE SP0188 High and Low Voltage Holiday Testing Low-Voltage Holiday Detector -Ground is attached directly to substrate. -Sponge saturated with a solution of tap water/wetting agent -Proper mix ratio 1oz/USgal -Proper of speed is 1ft/sec Double Stroke -Used on Coatings up to 20mils -may be used on concrete Low Voltage Holiday Detectors Common Errors -Failure to Keep probe in contact with surface -Moving the electrode too fast or slow -Over or under saturating the sponge ...

CPPA Module 3 Exam 182 Questions with Verified Answers Prior to nineties, what two regulations dictated property management industry? - CORRECT ANSWER 1. Federal Acquisition Regulation (FAR) part 45 "Government Property" 2. Federal Property Management Regulations (FPMR), for non-federal employees In NPMA, what is meant by "property"? - CORRECT ANSWER Government property What is the goal of the American National Standards Institute (ANSI)? - CORRECT ANSWER To enhance both the glob...

- correct answer which experience higher unit loads, gear teeth or rolling elements in bearings - correct answer gear teeth name three commonly used levels of sample bottle cleanliness - correct answer clean - fewer that 100 particles greater than 10 micron, superclean - fewer than 10 particles greater that 10 micron, ultraclean - fewer than 1 partic...

CSA W59 welding inspector level 13.1 Contractors In the absence of specific requirements in the governing design standard , at the option of the engineer what other standards shall the contractor be certified too ? If no standard is required what shall the contractor prove ? - correct answer W47.1 The contractor must prove their compentency to the engineer. 3.1.2 Welding processes What processes are covered by this standard ? - correct answer SMAW, GMAW, MCAW, FCAW, SAW, ESW, EGW, S...

Level 1 CSA 178.2 Questions and Answers Already Passed True or False: The fume generation rate for a welding process is used to measure the welder's exposure to fume. False What source recommends the types of ventilation to reduce welder exposure to welding fume? a) CSA Standard W117.2 b) Company health and safety policies c) The Occupational Health and Safety Act a) CSA Standard W117.2 Is the leg length of a concave fillet weld the same as the weld size? No What is a prequalified joint? ...

Journeyman Plumbing Codes –KY Exam Questions and Answers 100% Solved An applicant who fails an examination shall be eligible upon _______ for the next regular exam. - answerPaying an additional fee Five reasons your license can be suspended or revoked? - answer1. Knowingly violate provisions 2. Practice fraud or deception in obtaining license. 3. Incompetent to perform services. 4. Permitting use of your license by someone else. 5. Guilty of unprofessional or dishonorable conduct No ...

Journeyman Plumbing Codes –KY Exam Questions and Answers 100% Solved An applicant who fails an examination shall be eligible upon _______ for the next regular exam. - answerPaying an additional fee Five reasons your license can be suspended or revoked? - answer1. Knowingly violate provisions 2. Practice fraud or deception in obtaining license. 3. Incompetent to perform services. 4. Permitting use of your license by someone else. 5. Guilty of unprofessional or dishonorable conduct No ...

NACE CIP 1 CBT EXAM PRACTICE QUESTIONS With 100% Correct Answers Dew point is the temperature at which - answercondensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: - answerDocument the problem and advise the Contractor and Owner's representative. If a contractor is using a po...

Journeyman Plumbing Codes –KY Exam Questions and Answers 100% Solved An applicant who fails an examination shall be eligible upon _______ for the next regular exam. - answerPaying an additional fee Five reasons your license can be suspended or revoked? - answer1. Knowingly violate provisions 2. Practice fraud or deception in obtaining license. 3. Incompetent to perform services. 4. Permitting use of your license by someone else. 5. Guilty of unprofessional or dishonorable conduct No ...