Horizontal pipe - Study guides, Class notes & Summaries

Automatic Standpipe System A standpipe system that is attached to a water supply capable of supplying the system demand at all times and that requires no action other than opening a hose valve to provide water at hose connections. Auxiliary water supply supplementary source of water for a standpipe and/or sprinkler system. Control Valve A valve controlling flow to water-based fire protection systems. Control valves do not include hose valves, inspector's test valves, drain valves, trim va...

NGA 31 & 40 - Installing PE/Steel Pipes (31A), Installing Pipe in an excavation (31B) Horizontal Boring (31D), Dead Insertion (31E), Replacing Tracer Wire (40) *BASIC 8 OQs* Original Set [Notes based on the NGA 31/40 Student Manual written by Industrial Training Services] Backfill Refilling an excavated area or trench with excavated material. Proper backfill material depends on soil conditions and piping use. Bore Hole A hole bored into the ground vertically or horizontally to form a na...

Maine Journeyman Plumbing Exam Questions and Answers 100% Solved When Plumbing code conflicts with mechanical code, which shall prevail? - answerPlumbing code It is the duty of whom to notify the AHJ of work ready for inspection? - answerThe person doing the work What is AHJ? - answerAuthority Having Jurisdiction How much notice must you give the AHJ prior to inspection? - answer24 Hours hot water for public use lavatories shall be limited to what temp: A) 105 B) 120 C)115 D)110 - an...

To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - correct answer a) A transverse weld tension test. Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5 mm (0.5 in) thick carbon steel. a) Oxy-acetylene cutting. b) Air-carbon arc cutting. c) Oxy-propane cutting. d) Plasma ...

Waste water discharged into the building drainage system shall not be over _______ *F correct answer: 140 A water tank holds 50 gallons of water. How much does the 50 gallons of water weigh? correct answer: 417 lbs Exterior walls may be notched to a depth exceeding _______________ percent of its width. correct answer: 25 According to the WSSC PFGC, a full flow building water service valve shall be installed within _____ feet of where the water service enters the building. correct ans...

The modern word for plumber is derived from the Latin word for - ANSWER-A person who works with lead LEED applies to all areas of the profession, except - ANSWER-Renovation Water that comes from laundry and bathtubs and reused in known as - ANSWER-Graywater Suggested national plumbing standards are called - ANSWER-Model codes You are offered a job by another contractor before you have fulfilled your current obligations. The professional response is to - ANSWER-Ask the contractor to w...

Massachusetts Plumbers Journeyman Exam Questions And Answers Existing Work - answerA plumbing system or any part thereof installed prior to March 11, 2005. Soil Pipe - answerAny pipe that conveys the discharge of toilets, urinals or fixtures having similar functions to the building drain or building sewer. The discharge may be conveyed with or without the discharge from other fixtures Water Distribution Pipe - answerA pipe within the building or on the premises that conveys water from the water ...

According to the Safe Drinking Water Act the basic definition of a public water supply system is any water system that supplies water for human consumption that serves: - 15 service connection or over 25 persons for over 60 days a year What federal law regulates public water supplies? - Safe Drinking Water Act What cause water to move through pores in soil and rocks ? - Gravity What are disease producing bacteria called? - Pathogenic A presence/absence coliform test utilizes - color change...

CWB Level 2 Closed Book Questions and Answers 100% Correct CWB Level 2 Closed Book Questions and Answers 100% Correct CWB Level 2 Closed Book Questions and Answers 100% Correct To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - ANSWER-a) A transverse weld tension test. Select the cutting process that would provide the...

Texas State Plumbing Inspectors Exam Study Questions (Oscar) and AnswersTexas State Plumbing Inspectors Exam Study Questions (Oscar) and AnswersTexas State Plumbing Inspectors Exam Study Questions (Oscar) and AnswersTexas State Plumbing Inspectors Exam Study Questions (Oscar) and Answers Fixture connections which may be served through access panels are considered - ANSWER-Accessible The part of the lowest piping of a drainage system, which recieves the discharge from the soil, waste and othe...