Icc masonry Study guides, Class notes & Summaries

A method of proportioning structural members, such that elastically computed stresses produced in the members by nominal loads do not exceed specified allowable stresses. Also called working stress design correct answer: Allowable stress design IBC Definitions Cell (masonry) IBC Definitions correct answer: A void space having a gross cross-sectional area greater than one and a half square inches Dead Load IBC Definitions correct answer: The weight of materials of Construction Incorpo...

ICC Masonry Exam Rated 100% Correct!

ICC Masonry Exam Study Guide 2024

QUESTIONS AND ANSWERS

Penthouses constructed on buildings of other than Type I Construction shall not exceed __ feet in height above the roof deck. - Answer- 18 (Section 1510.2.1 Height above roof deck) In exterior walls and bearing partitions, any wood stud is permitted to be cut or notched to a depth not exceeding __ percent of it's width. - Answer- 25 Section 2305.5.9 The ends of wood girders entering exterior masonry of concrete walls shall be provided with a __ inch airspace on top, side and end - Answ...

Which of the following is the standard specification for loadbearing concrete masonry units? - Answer ASTM C 90; RCMCI 6th Edition, Section 2.2.1 Which of the following grout admixtures is used to obtain a high slump with reduced water? - Answer Super plasticizer; RCMCI 6th Edition, Section 2.11.6 Which of the following is the standard specification that autoclaved aerated concrete masonry units must conform to for the strength class specified in the contract documents? - Answer ...

ICC Masonry Exam 2023 Questions and Answers with complete solution

ICC Masonry Exam Study Guide 2024

Which of the following is the standard specification for loadbearing concrete masonry units? - ASTM C 90; RCMCI 6th Edition, Section 2.2.1 Which of the following grout admixtures is used to obtain a high slump with reduced water? - Super plasticizer; RCMCI 6th Edition, Section 2.11.6 Which of the following is the standard specification that autoclaved aerated concrete masonry units must conform to for the strength class specified in the contract documents? - ASTM C 1386; CI 530; Part 2...

Masonry ICC study Questions and Answers Control joints are considered joints that will ..... shortening, shrinkage and/or reduction in the length of the wall. A. Coordinate B. Accommodate C. Reduce D. Control Answer B. Accommodate A standard hook can be a 180° turn plus an extension of at least ..... bar diameters, but not less than ..... inches at the free end of the bar A. 4,2.25 B. 4,2.5 C. 2.2.75 D. 2,3 Answer B. 4bar diameters or 2.5 inches The cleanout opening...