Nace cip level 1 2 Study guides, Class notes & Summaries

NACE CIP Level 1 Exam Questions and Verified Answers| 100% Correct| (2023/ 2024 Update) Q: Improper atomization of the coating may cause which of the following? (Select all that apply.) Answer: A. Uneven DFT Dry spray C. Overspray Q: High viscosity due to low temperature should be corrected by ? (Select all that apply.) Answer: A. Adding extra thinner (B) Heating the coating Q: One advantage of conventional spray is Answer: A. Applicator control Q: Solvent bor...

NACE CIP Level 2 Exam (2023 Update) Questions and Verified Answers Q: What does re-enforcing add to a resin? Answer: Strength Q: Some resins used in re-enforced linings: Answer: 1. Polyester 2. Epoxy 3. Vinyl ester Q: Lining Definition Answer: A coating normally in immersion service Q: Thermal spray safety practices Answer: 1. HP rated hoses 2. Never use compressed air to clean work area or clothing 3. Don't use plant air for breathing air Q: Com...

NACE CIP 1 CBT EXAM PRACTICE QUESTIONS AND ANSWERS Dew point is the temperature at which - Answer-condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: - Answer- Document the problem and advise the Contractor and Owner's representative. If a contractor is using a poorly mainta...

NACE CIP Level 1 Exam 2023 | Guide with Verified Answers (2023/2024 Update) Q: What are the two primary components of a liquid applied coating? Answer: Pigment, Vehicle (Resin/Binder + Solven) Q: What are the three (3) methods by which a coating provides corrosion control? Answer: barrier, inhibitive, sacrificial (cathodic protection) Q: What are the three different ways a coating can adhere to the surface? Answer: Chemical, Mechanical, Polar/valance or combo of al...

NACE CIP 1 CBT EXAM PRACTICE QUESTIONS AND ANSWERS Dew point is the temperature at which - Answer-condensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: - Answer- Document the problem and advise the Contractor and Owner's representative. If a contractor is using a poorly mainta...

NACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ decrease The electrolyte is a medium which carries the following type of current? Ionic Corrosion oc...

NACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? - Correct answerelectrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Correct answer-zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - Correct answer-decrease The electrolyte is a medium which carries the following type of current?...

NACE CIP1 Exam Sample Questions with Verified Answers| Latest 2023/ 2024 1. You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if ...

NACE CIP Level 1 & 2 Sample Quizes With 100% Correct Questions And Answers All of the following are generally included within inspection reports EXCEPT - cost information When applying coatings, instruction regarding appropriate types of Personal Protection Equipment (PPE) will always be found within the - material safety data sheet (MSDS) or safety data sheet (SDS) Material inventory report should contain all of the following EXCEPT - overall cost of materials According to the N...