Nccer level 1 module 10 - Study guides, Class notes & Summaries

________ typically include the following information: a site plan, floor plans, elevations of all exterior faces of the building, and large-scale detail drawings. - Answer-Architectural drawings A _________ is an exact copy or reproduction of an original drawing. - Answer-Blueprint A simple, single-line diagram used to show electrical equipment and related connections is a ___________. - Answer-Block diagram A ________ shows the path of an electrical circuit or system of circuits, along...

A cutaway view of a building or object is known as a(n)______. Sectional drawing What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast load of 150VA? 1,200VA In which division of the MasterFormat is electronic safety covered? Division 28 A section line on a drawing shows The location of the section on the plan On electrical drawings, a solid line with a solid circle at the end indicates wiring______. Turn do...

Arc burn - ANSWER burn to the skin produced by brief exposure to intense radiant heat and ultraviolet light Bonded - ANSWER the permanent joining of metallic parts to form an electrically conductive path that will assure electrical continuity and the capacity to safely conduct any current likely to be imposed on it Carbon steel - ANSWER an alloy of iron combining iron and usually less than 1 percent carbon to provide hardness Electric arc - ANSWER the flow of an electrical current acros...

NCCER ELECTRICAL LEVEL 1 MODULE 11- RESIDENTAL WIRING QUESTIONS AND ANSWERS The minimum number of small appliance circuits required by the NEC® in a kitchen area is _____. ** 2 When sizing residential electrical services, the laundry load is calculated as _____. 1,500VA When sizing the general lighting load for electric services, the first 3,000VA is rated at _____. ** 100% According to NEC Section 220.53, a demand factor of 75% may be applied to four or more _____. Fixed appliance lo...

Level 1 Module 10 Basic Electrical Construction Drawings Exam 2023 with complete solution

NCCER ELECTRICAL LEVEL 1 MODULE 11- RESIDENTAL WIRING QUESTIONS AND ANSWERS The minimum number of small appliance circuits required by the NEC® in a kitchen area is _____. ** 2 When sizing residential electrical services, the laundry load is calculated as _____. 1,500VA When sizing the general lighting load for electric services, the first 3,000VA is rated at _____. ** 100% According to NEC Section 220.53, a demand factor of 75% may be applied to four or more _____. Fixed appliance lo...

NCCER Welding Level 1 Module 1 Safety Verified Guide 2024 1. What does arc burn refer to? Arc burn is a skin burn resulting from short exposure to intense radiant heat and ultraviolet light. ️ 2. What does it mean when parts are described as bonded? Bonded parts are permanently joined together to create an electrically conductive path, ensuring electrical continuity and the ability to safely carry any expected current. ️ 3. What is carbon steel? Carbon steel is an alloy c...

NCCER ELECTRICAL LEVEL 1 - Module 1 Occupational Overview The Electrical Industry Complete Answers 1. During which phase of construction are panelboards typically installed in residential wiring? Panelboards are generally installed during the rough-in phase. ️ 2. What type of cable is commonly used in residential wiring systems? Residential wiring systems primarily utilize non-metallic sheathed cable, often referred to as Romex. ️ 3. In which setting would you most commonly...

NCCER Core Curriculum Module 2 Verified Answers 1. What is the purpose of cross-bracing in a structure? - Cross-bracing consists of braces (either metal or wood) positioned diagonally between the bottom of one rail and the top of another rail to provide additional support to the structure. 2. How is excavation defined in construction terms? - Excavation refers to any artificial cut, trench, cavity, or depression in the earth's surface created by the removal of soil. This can be done...

NCCER Module 9 Review 1. The operator ️Who should you keep eye contact with when using hand signals? 2. Motorized materials-handling equipment ️You must be trained, certified and authorized to work with __________. 3. When moving a material cart on an inclined or declined surface ️When do you need to be sure the load does not exceed the labeled weight capacity? 4. A non-motorized materials-handling device that uses force applied with a lever, screw, or hydraulic press to rai...