Oil burner - Study guides, Class notes & Summaries

Massachusetts Oil burner Practice Exam Questions and Answers 100% Pass The cross connection between two supply tanks shall not exceed? - Correct Answer ️️ -660 gallons When is an automatic draft control not required? - Correct Answer ️️ -When the equipment is designed to control the draft. Combustion performance testing can indicate: - Correct Answer ️️ -Improper air oil mixture, too much combustion air, and low pump pressure. If a second oil-burning appliance is installed in...

LOW PSI OIL BURNER OPERATOR P99 EXAM QUESTIONS WITH AUTHENTICATE ANSWERS GRADED A+ 100% 2024

Mass oil burner exam questions with correct answers

Oil burners test questions 1-200 with correct answers| graded a

What is a general requirement of the location of the installation of a boiler? - ANSWERSAdequate clearance from combustile construction What temperature must the materials remain under during combustion? - ANSWERS170 degrees What is a requirement for the access of the boiler? - ANSWERSAccess for operation and maintenance must not be hazardous What is required upon installation to operate a boiler? - ANSWERSInspection and test resulting in equipment use permit from commissioner How of...

The fill line in an oil burner system is a line used to - ANSWER Fill the storage tank with oil The aquastat is located - ANSWER Below the water line The oil storage tank - ANSWER Provides the supply of oil for combustion in the oil burner The temperature in the storage tank for # 6 oil is - ANSWER 100 and 130 degrees Fahrenheit A suction cup - ANSWER Circulates the oil throughout the system The oil strainer removes the contaminants - ANSWER From the oil before the oil reaches the...

Oil Burner License Exam 2023 Questions and Answers complete.

What is the first thing a tech should do when arriving at a no combustion call? - Answer-Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer--Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer-False When in the presence of a flame, a cad cell normally reads.. - Answer-300-100...

Massachusetts Oil Burner Study Guide Rated A+ What is the voltage found at the TT terminals 24 volts What are the 8 steps of a no heat call 1 talk to customer 2 check tt.3 check to make sure an emergency switch is on 4check to make sure there is oil in the tank 5 check to make sure the main power going to the unit is on six check to make sure that tank shut off valve is open 7 know whether the tank is located above or below the burner I know the type and style of the system that is ...

Oil Burner License Exam What is the first thing a tech should do when arriving at a no combustion call? - Answer-Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer--Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer-False When in the presence of a flame, a cad cell...