Parallel resistors - Samenvattingen en Aantekeningen

ASVAB MEPS Exam 223 Questions with Verified Answers A radar is designed to report the track of an aircraft every second. If this radar reports 30 tracks in one minute, what percentage of the time did the radar track the aircraft? - CORRECT ANSWER 50% Jerry walked a dog from 6:40 a.m. to 7:30 a.m. one day. If he was paid at the rate of $6 per hour, how much did he earn that day? - CORRECT ANSWER $5.00 A woman is looking for a bigger square office. She finds an office twice the area of he...

1. A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required?: Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave 2. A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do?: Replace it with a larger MOV 3. On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue?: Suicide Circuit 4. You have an old DC ...

a circuit has a source voltage of 50v and a current of 10A, what is the power in watts? - Answer-500w voltage is defined as the? - Answer-driving force that makes current flow in a circuit if a circuit has 12 amps of current and the resistance is 20 ohms, the applied voltage is? - Answer-240 volts if two 10 ohm resistors are connected in series, what is the total resistance of the resistors? - Answer-20 ohms to make sure the voltage is turned off before touching any terminals, use a?...

An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the Correct Answer current lags the voltage The power factor of a load is equal to the ____________ power divided by the ____________ power. Correct Answer True ; apparent A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination is 30 amps. Under these conditions, the line voltage will be...

In a series circuit a) voltage drops are always equal b) total resistance equals the sum of individual resistances c) current varies through resistors d) total current is equal to the sum of the current through each resistor - ANSWER-b According to Ohm's Law, an electrical circuit with a driving voltage of 12 Volts and a resistance of 10 Ohms produces a current of...(Amps) - ANSWER-1.2 A Kirchoff's Current Law - ANSWER-the total current entering a circuit branch must equal the curr...

If a circuit has a voltage of 30 volts and a current of 2 amps, what is the resistance? CORRECT ANSWER 15 ohms If a stator in wye configuration reads 120 VAC line-to -neutral, what should the line-to-line voltage be? CORRECT ANSWER 208 VAC What is the term used to refer to the common connection point/fourth terminal created when you connect a stator in wye configuration? CORRECT ANSWER Neutral The best way to integrate safety on the job site? CORRECT ANSWER Planning and checklists Th...

AC-HPAT Physics Exam (Latest 2025 / 2026) | Questions and Answers | 100% Correct | Grade A - Algonquin Question: Kirchhoff's Laws Answer: Kirchhoff's Laws provide two fundamental rules for analyzing more complex circuits: 1. Kirchhoff's Current Law (KCL): The sum of the currents entering a junction (or node) in a circuit is equal to the sum of the currents leaving that junction. This is based on the principle of conservation of charge. ∑I_in = ∑I&lt...

if a combination audible/visible appliances are installed, the location of the installed appliance shall be determined by the requirements of Answer - the visible appliance what is the maximum number of 12-gaugeTHHN conductors that can be installed in 1-inch EMT Answer - 26 Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300 Ohms. What is the equivalent resistance? Answer - 150 Ohms I room is 200 feet long and 100 feet wide, and the 8 foot high ceiling is smooth and flat...

An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the correct answer: current lags the voltage The power factor of a load is equal to the ____________ power divided by the ____________ power. correct answer: True ; apparent A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination is 30 amps. Under these conditions, the line voltage wil...

ASVAB Practice Exam (Latest 2024/ 2025 Update) Questions and Verified Answers| Grade A| 100% Correct Q: Series circuit Answer: a circuit where all parts are connected together as one path. Q: parallel circuit Answer: an electrical circuit in which the current is divided into two or more paths Q: Total resistance Answer: The amount of resistance combined from multiple resistors in a series and/or parallel circuit. Q: Series-Parallel Circuit Answer: ...