Wheel bearing - Study guides, Class notes & Summaries

Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - Answer-Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specification then back off a certain number of degrees. A customer says that the steering ...

The brake fluid reservoir is low on fluid. Which of the following is the most likely cause? A. Worn pads B. Worn shoes C. Bypassing master cylinder D. Leaking vacuum check valve (Ans- A A customer says their car makes more noise on asphalt than on concrete road surfaces. Which of the following could be the cause? A. Front wheel bearing wear B. Rear wheel bearing wear C. Aggressive tire treat patterns D. Worn brake pads (Ans- C Which of the following would most likely cause a brake ...

MANUAL TRANSMISSION MICHIGAN MECHANIC STUDY GUIDE WITH COMPLETE SOLUTIONS WHEN REPLACING A LEAKING REAR AXEL SEAL, YOU FIND THE AXLE IS PITTED IN THE WHEEL BEARING AREA. WHAT SHOULD YOU DO? A. INSTALL A SLEEVE OVER THE AXEL AND REPLACE THE SEAL. B. INTALL A NEW AXLE, WHEEL BEARING, AND SEAL. (POSSIBLE CORRECT AWNSER) C. POLISH THE AXLE BEFORE INSTALLING IT. D. MACHINE THE AXEL UNDERSIZE, AND REPLACE THE WHEEL BEARING AND SEAL. (NOT CORRECT AWNSER) AS YOU CHECK A TRANSMISSION O...

Wheels and tires - Vehicle Technology studyguide with Q & A Wheels Modern vehicle wheels generally comprise a rim and nave or wheel disc. The rim is that part of the wheel on which the tire is mounted. The nave joins the rim to the wheel hub. Wheel size is primarily determined by the wheel-brake diameter and by the load-bearing capacity of the tire. The most important terms are: rim width, rim diameter, center hole, hole circle diameter, number of mounting holes, countersunk and stud design,...

What is the most important reason for doing a vehicle inspection? - CORRECT ANSWER-Safety. Safety for yourself and other road user. What things should you check during a trip? - CORRECT ANSWER-Watch gauges, mirrors, and use your senses to check for problems...LOOK, LISTEN, AND SMELL. Name some key steering system parts. - CORRECT ANSWER-steering wheel, tie rod, steering shaft, hydraulic fluid reservoir, gear box, pitman arm, drag link, steering knuckle, spindle, steering arm, power steerin...

ASE EXAM QUESTIONS & ANSWERS 2024/2025 Which of the following is true about control arm bushings? A: They are located between the frame and the control arm. B: Worn control arm bushings result wheel shimmy. C: They are tightened on while unloaded and the vehicle is raised in the air D: Both A or B - ANSWERSD: Both A or B Technician A says that leaf spring shackle swivels and allows the spring to flatten as the vehicle travels over bumps in the road. Technician B says that a single cr...

Which of the following is true about control arm bushings? A: They are located between the frame and the control arm. B: Worn control arm bushings result wheel shimmy. C: They are tightened on while unloaded and the vehicle is raised in the air D: Both A or B - Answer-D: Both A or B Technician A says that leaf spring shackle swivels and allows the spring to flatten as the vehicle travels over bumps in the road. Technician B says that a single crack in the longest blade of a multi-leaf lea...

The component in a wheel bearing that maintains the proper spacing between the roller bearings or ball bearings is called a(n) _____. - Bearing cage Technician A states that "serviceable" and "sealed bearings" are typical categories of wheel bearings used in vehicles. Technician B states that sealed bearings require periodical maintenance. Who is correct? - Technician A The term inner race describes the inside component of a wheel bearing that has a smooth, hardened surface for roller ...

Suspension & Steering Questions and Answers Already Passed Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-end alignment what sh...

SOS Mechanic Certification- Suspension & Steering Questions and Answers 100% Pass Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-en...