240 volts - Study guides, Class notes & Summaries

NOCTI Electrical Questions and Answers Already Passed In general a beginning tradesperson with little or no experience in the electrical field is known as a/an apprentice The proper angle for setting up a ladder is to place its base a/an___________ of the working length of the ladder from the wall or other vertical surface. quarter A __________ fire extinguisher should be used on an electrical fire. Class C A person with a serious electrical injury should be moved only if they are in immedia...

IEC Lesson 104 HW Questions and Answers Rated A+ ___ flow equals current flow. Electron ___ force is the component of a circuit that causes electrons to flow. Electromotive ____ is the force that causes current to flow Voltage .0000001 A = ___ μA .1 .010005 A = ___ mA 10.005 .05 mV = ___ V .00005 .0505 A = ___ mA 50.5 1.705 V = ___ mV 1,705 105 mA = ___ A .105 23.5 V = ___ mV 23,500 30 μA = ___ A .00003 A heating element is rated to operate at 120 volts. ...

IEC Exam Final Study & Practice Questions With Verified Correct Answers | Updated What is the result if the neutral wire becomes open on a multiwire circuit having unequal loads? Select one: a. The load of higher resistance would overheat and probably be damaged. b. The load of lesser resistance would overheat and probably be damaged. c. No effect until one load is turned off or opens. d. No effect. - ANSWER : The load of higher resistance would overheat and probably be dam...

NCCER Electrical Set Test Questions And Verified Correct Answers What is shown on a sectional drawing? - ANSWER : cutaway view of a building The NEC recommends maintaining voltage within a 3% drop. If a branch circuit operates at 240 volts AC. What is the minimum circuit operating volt? - ANSWER : 232 What is the name of the connecting device shown in the diagram? - ANSWER : split - bolt The volt amperes in an AC circuit is the same as - ANSWER : apparent power What should b...

The resistance of electric flow through a circuit is measured in: A. Volts B. Amperes C. Ohms D. Joules - Answer-C. Ohms A circuit with a single path for electric current flow is defined as a(n): A. Parallel circuit B. Closed circuit C. Series circuit D. Open circuit - Answer-C. Series circuit The degree of resistance provided by an individual resistor within a circuit is measured in: A. Volts B. Watts C. Ohms D. Amperes - Answer-C. Ohms Within a circuit, the letter ( I ) is used ...

The typical electrical service for homes in North America is a_____? - 120240 Volt The 240 Volt circuit is used for? - Appliances The return conductor (a.k.a. the neutral) is at ___ volts because it is grounded to the electric panel - Zero Most 120 Volt circuits are wired to deliver ___ or ___ Amps of current - 15, 20 Most ___ Buildings are supplied with 120240 Volt services. This means that the cable assembly is made up of ___ ungrounded conductors each supplying 120 V with one ground...

NCCER Electrical Exam Tested Questions And Verified Correct Answers What is shown on a sectional drawing? - ANSWER : cutaway view of a building The NEC recommends maintaining voltage within a 3% drop. If a branch circuit operates at 240 volts AC. What is the minimum circuit operating volt? - ANSWER : 232 What is the name of the connecting device shown in the diagram? - ANSWER : split - bolt The volt amperes in an AC circuit is the same as - ANSWER : apparent power What shoul...

NCCER Electrical Set Test Questions And Verified Correct Answers What is shown on a sectional drawing? - ANSWER : cutaway view of a building The NEC recommends maintaining voltage within a 3% drop. If a branch circuit operates at 240 volts AC. What is the minimum circuit operating volt? - ANSWER : 232 What is the name of the connecting device shown in the diagram? - ANSWER : split - bolt The volt amperes in an AC circuit is the same as - ANSWER : apparent power What should b...

NCCER Electrical Test Exam Set Questions & Correct Answers < Updated & Already Passed > The NEC recommends maintaining voltage within a 3% drop. If a branch circuit operates at 240 volts AC. What is the minimum circuit operating volt? 232 What is the name of the connecting device shown in the diagram? Split-bolt The volt amperes in an AC circuit is the same as Apparent power What is the voltage drop for a #8 (16.510 cmil) copper wire at 120v. 215 feet one way and a load of...

What is shown on a sectional drawing? - cutaway view of a building The NEC recommends maintaining voltage within a 3% drop. If a branch circuit operates at 240 volts AC. What is the minimum circuit operating volt? - 232 What is the name of the connecting device shown in the diagram? - split - bolt The volt amperes in an AC circuit is the same as - apparent power What should be done to change rotation of a 3 phase motor? - Swap any two T leads 5. If a voltage source of a circuit pr...