A power miter Study guides, Class notes & Summaries

What is the margin of safety? -4 inches. When using a saw, never... -Feed the material faster than the saw blade can remove the wood easily. The palm sander is used for what? -removing small amounts of material slowly. All small work should be secured with what? - A clamp or vise. Make all adjustments on all power tools with the power off, except... -When adjusting the speed of the lathe. Always cut.. -Away from yourself when using a chisel, knife or any edged tool. What does it mean whe...

When row-cutting most commercial tufted carpet for seaming, technicians should use loop-pile or cushion back cutter Where practical, the industry-preferred method for trimming seam edges is called what? row cut What tool should be used to pound down the metal lip of clamp-down transition strip (door bar)? White rubber mallet When sealing a seam, a bead of adhesive is applied to the carpet edge to adhere what two things? 1. Primary backing 2. Secondary backing When sealing seams, to evenl...

NCCER Module 4 (Power Tools) - Questions with Verified Answers A detail grinder smoothes and polishes intricate metallic work by using attachments called? Point A masonry bit is able to drill into concrete and similar material because it has a? Carbide tip An example of an electric power drill that is designed to be used in a tight space is a? Right angle drill Pneumatic tools get their powers from? Air pressure Before you start drilling, make sure the drill bit is Tightened in the chuck When ...

wrench used for rail installation - ANSWER spud wrench The minimum clearance form the floor to the suspended ceiling is: a. 80" b. 96" c. 7'3" d. 8'2" - ANSWER a. 80" what should you be aware of when removing a cab for replacement? a. The weight that is to be removed from the ceiling. b. The original weight and counterbalancing. c. How much the cab was out of square. d. Cover the panels so they do not get banged up. - ANSWER b. The original weight and counterbalancing. ...

Woodshop Chapter 25 Vocabulary Exam Questions with Correct Answers The bevel angle on a sliding compound miter saw can be set at any angle from 0 to ___ degrees. - Answer-45 To set the angle of a miter, position the ___ according to a scale. - Answer-Turntable The plastic or fiberboard piece located in the center of the turntable that minimizes the gap between the side of the blade and the turntable is a(n) ___. (2 words) - Answer-Kerf Board To operate a sliding compound miter saw, ...

00104-15 (Introduction to power tools)Trigger lock When using power tools, never engage the _____. Disconnect the power source Before replacing parts such as bits blades, or discs on any tool, you must______. Applied to the drill bit Most hammer drills will not hammer until pressure is _____. When there is no source of electricity A pneumatic drill is commonly used _______. Guard protects you from touching the blade Never use a circular saw that does not have an upper bl...

What does a mechanical engineer do? correct answers applies the principles of physics and material science for analysis, design, manufacturing, and maintenance of mechanical systems What does mechanical engineering involve? correct answers the production and transmission of heat and mechanical power for design, production, and operation of machines and tools examples of things mechanical engineers work on correct answers biomechanics, crawler transport, robots, acoustics, object of deve...

NCCER Module 4 (Power tools) Questions and answers, rated A+ when using power tools, never engage the? - trigger lock. before replacing parts such as bits, blades or disks on any tool, you must? - make sure it is disconnected from its source or energy most hammer drills will not hammer until pressure is? - applied to the drill bit against a surface a pneumatic drill is commonly used? - when there is no source of electricity never use a circular saw that does not have an upper blade guard...

CORE Mod 104 Power Tools Review 1 Questions and Answers 100% Pass What is a Porta-Power tool? A)a hydraulic powered tool B)a electric tool C)a pneumatic tool D)a DC battery tool - Answer- A)a hydraulic powered tool A power miter saw is a saw that combines a miter box with a circular saw. True or False - Answer- True A____________should always be used with a circular saw. A)two prong plug B)GFCI C)GDGI D)4- conductor orange cord - Answer- B) GFCI If you are going to use an air wrenc...

Final Exam Elevator 2024 wrench used for rail installation - Answer ️️ -spud wrench The minimum clearance form the floor to the suspended ceiling is: a. 80" b. 96" c. 7'3" d. 8'2" - Answer ️️ -a. 80" what should you be aware of when removing a cab for replacement? a. The weight that is to be removed from the ceiling. b. The original weight and counterbalancing. c. How much the cab was out of square. d. Cover the panels so they do not get banged up. - Answer ️️ -b. T...