Api 570 Study guides, Class notes & Summaries

A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness (Tmin) is 0.218" and the ...

API 574 for API 570 Exam Questions and Answers 100% Pass API Recommended Practice 574, Inspection of Piping, Tubing Valves, and Fittings, does not cover: a. control valves. b. piping smaller than 2" NPS. c. tubing smaller than 1.5" diameter. d. fittings smaller than 2" NPS - Answer- A The refining industry generally uses what type piping for severe service? a. brass b. cast c. seamless d. longitudinal seam welded - Answer- C Piping made by rolling plates to size and welding the s...

API 570 Study Guide (Full) Questions and Answers Rated A+ Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on which weld orientation? longitudinal weld Per B31.3, how much RT is conducted on circumferential welds of a pipe in normal service? 10% for welded pipe, the normal thickness of under-tolerance is? .010 or 10 mils The corrosiveness of soils can be determined by measuring the soils: Resistivity when qualifying a weld procedure t...

API 570 Test Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified | Ace the Test

Code to follow when performing an internal inspection on pipe - Answer- "API 510" Positive material identification (PMI) - Answer- "API 578" Fitness for service - Answer- "API 579" Risked based inspection (RBI) - Answer- "API 580" Valve inspection and testing - Answer- "API 598" Cathodic protection - Answer- "API 651" Welding on in-service equipment containing the flammables - Answer- "API 2201" NDE procedure guidelines - Answer- "ASME SECTION V" Design co...

API 570 Study Guide (Full) Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified | Ace the Test

API Recommended Practice 574, Inspection of Piping, Tubing Valves, and Fittings, does not cover: a. control valves. b. piping smaller than 2" NPS. c. tubing smaller than 1.5" diameter. d. fittings smaller than 2" NPS - A The refining industry generally uses what type piping for severe service? a. brass b. cast c. seamless d. longitudinal seam welded - C Piping made by rolling plates to size and welding the seams is larger than ______ inches outside diameter. a. 10 b. 16 c. 14...

API 571 PRACTICE QUESTIONS FOR API 570 EXAM What does "L" mean in Austentic SS, like 304L? A) Has a low carbon content B) has a low chrome content C) has a low nickel level D) has a low toughness level E) is lousy steel A What does "H" mean in Austenitic SS, like 316 H? A) Has a high carbon content B) has a high chrome content C) has a high nickel level D) has a high toughness level E) is horrible steel A Which of the following is NOT a Ferritic Steel? A) 300 Series SS B) ...

API 570 - Open Book - Practice Exam 2024 Already Passed A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B mater...

API 570 - Open Book - Practice Exam Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified | Ace the Test