Cet study guide - Study guides, Class notes & Summaries

B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply correct answers D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 milliamps D. 50 milliamps correct answers B. 500 microamps Shaded components ...

CET Study Guide Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified | Ace the Test

The Associate CET Study Guide Exam Questions with Answers

Which of the following wires has the greatest cross sectional area? 9 AWG The capacitance of a capacitor ____if the distance between the plates decreases while all other properties of the capacitor remain the same. increases A voltmeter that converts AC to DC by rectifying the voltage, would be used to indicate the correct value of measured ______. varying DC voltages only in the drawing below, what is the current through the resistor? 10V 5Ω 2 amps which of the below waveforms show appro...

The Associate CET Study Guide Exam Questions And Answers...

CET Study Guide Questions and Answers Rated A+ The "1" in binary number carries a decimal weight of ___________. 32 Which of these is within tolerance for a resistor that is color coded red, black, red and gold? 2000 and 1900 ohm's Which would be the most likely cause of hum in an amplifier- but only when it is switched to the CD position? Bad shielded cable from the CD to the amplifier input When measuring power to a speaker, a doubling of the power represents a 3 dB increas...

The Associate CET Study Guide Exam 276 Questions with Verified Answers B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply - CORRECT ANSWER D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 millia...

B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply - ANSWER D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 milliamps D. 50 milliamps - ANSWER B. 500 microamps Shaded components on the electro...

The Associate CET Study Guide 2024 with Complete Solutions B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply - Answer- D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 milliamps D. 50 milliamps - Ans...

The Associate CET Study Guide 2024 with Complete Solutions B+, or supply voltages in electronics products, is considered to be: A. +5 to +12 VDC B. 0 to 30 V DC C. +12 to 300 V DC D. The anode or plate voltage supply - Answer- D. The anode or plate voltage supply Leakage current in an electronic product, between either of the AC power cord conductors and the chassis or any exposed metals should not exceed _________. A. 5 microamps B. 500 microamps C. 5 milliamps D. 50 milliamps - Ans...