Epa 608 type - Study guides, Class notes & Summaries

EPA 608 Type 1 Questions and Answers 100% Pass Recovery equipemnt used for the service or repair of small appliances must be certified by an EPA approved lab if the recovery equipment was made after November 15, 1993 Recovery devices made before 11-15-93 and are used for recovery of refrigerant from small appliances must be capable of: recovering 80% of the refrigerant whether or not the compressor is operating or achieving a 4 inch vacuum under conditions of ARI 740-1993 EPA's definition of...

EPA 608 Type 3 exam with 100% correct answers 1. On low pressure chillers, moisture typically enters the refrigerant system through *correct answer*air leaks from areas with gaskets or fittings 2. The maximum test pressure for leak testing a low pressure centrifugal is: *correct answer*10 psig 3. Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller *correct answer*...

EPA 608 Type 3 exam with 100% Complete Solutions Lates (Graded A+) On low pressure chillers, moisture typically enters the refrigerant system through air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process refrigeratio...

EPA 608 Type 3 exam with 100% Complete Solutions. On low pressure chillers, moisture typically enters the refrigerant system through air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process refrigeration systems must be ...

EPA 608 Type 2 Exam % Correct Answers . Technicians maintaining, servicing, repairing or disposing of high pressure or very high-pressure appliances, except small appliances and MVAC, must be certified either as a Universal Technician or a ______ ___. Type 2 After the installation of any type of system, the unit should be pressurized with _____ and _____ checked. nitrogen leak Nitrogen is an ______ gas. inert In order to determine the general area of a leak, technicians should use a ___...

EPA 608 Type 2 Exam Questions with 100% Correct Answers Latest Updated . Technicians maintaining, servicing, repairing or disposing of high pressure or very high-pressure appliances, except small appliances and MVAC, must be certified either as a Universal Technician or a ______ ___. Type 2 After the installation of any type of system, the unit should be pressurized with _____ and _____ checked. nitrogen leak Nitrogen is an ______ gas. inert In order to determine the general area of a l...

The primary water source for cooling the condenser of a water-cooled recovery unit is: - local municipal water supply Which of the foloowing repairs would ALWAYS be considered "major" under EPA's - replacement of evaporator coil According to ASHRAE Guideline 3-1996, if the pressure in a system rises from 1 mm Hg to a level above ____ during a standing vacuum test, the system should be checked for leaks. - 2.5 mm Hg On low pressure chillers, moisture typically enters the refrigerant syst...

EPA 608 Type 2 certification Exam Questions With 100% Correct Answers (2024/2025) After the installation of any type of system, the unit should be pressurized with _____ and _____ checked. nitrogen leak Nitrogen is an ______ gas. inert In order to determine the general area of a leak, technicians should use a _____ or _____ leak detector. electronic ultrasonic After locating the general area of a leak, ______ ______ are used to pinpoint it. soap bubbles A refrigeration unit using an o...

EPA 608 Type 3 Exam Questions And Answers On low pressure chillers, moisture typically enters the refrigerant system through - ANS air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: - ANS 10 psig Leak test and repair the chiller to reduce refrigerant loss from a purge unit on CFC-11 chiller - ANS ... A hydrostatic tube test kit is used to: - ANS determine if a tube leaks Commercial and industrial proce...

A refillable refrigerant cylinder must not be filled above ______ of its full capacity. - Answer 80% Ozone layer absorbs and scatters ________ from the sun - Answer Ultraviolet light An award of up to ______ may be paid to a person supplying information that leads to a penalty against a technician who is intentionally venting. - Answer $10,000 Since ________, it is no longer legal for CFCs to be manufactured or imported into the United States - Answer Jan 1, 1996 R-134a is a chlorine...