Fuel filter Study guides, Class notes & Summaries

P-98 / Supervise Fuel-Oil Transfer in Buildings Exam Combined Set Tests Questions & Revised Correct Answers The___________removes most contaminants from the oil before the oil reaches the burner's strainer - ANSWER : Oil filter The suction line has to be at least ______ inches from the bottom of the tank for sediments not to be absorbed. - ANSWER : 6 Excessive vacuum readings indicate that there is an obstruction in the suction line (such as dirty oil strainer). - ANSWER : T...

ASE practice test (diesel engine) T2 Already Passed A diesel engine has excessive oil consumption with no visible oil leaks. Which of these could be the cause? (D) A leaking turbocharger impeller shaft seal Which of these could be the cause of blue smoke from the exhaust on a vehicle that is not equipped with an exhaust aftertreatment system? (C) Worn piston rings During long uphill pulls, a delivery truck equipped with an engine protection system activates a warning light and buzzer, and the...

HVAC NATE Gas Heat Exam Prep (Latest 2024/ 2025 Update) 100% Correct Questions and Verified Answers| Grade A Q: When starting up a dual system, the temperature rise method for determining airflow cannot be used with compressor cycle of the heat pump because: Answer: The capacity of the system varies too much with outdoor temperature. Q: The flame pattern a technician would expect to see on a properly operating single stage gas furnace equipped with "in shot" type burner is a:...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer-Increase Atomizing type burners were designed to burn which type of fuel - Answer-Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer-Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - Answer-In the furnace room with 5' of heating unit. The primary purpo...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer-Increase Atomizing type burners were designed to burn which type of fuel - Answer-Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer-Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - Answer-In the furnace room with 5' of heating unit. The primary...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must correct answersIncrease Atomizing type burners were designed to burn which type of fuel correct answersType 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by correct answersReducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed correct answersIn the furnace room with 5' of heat...

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements appl...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answer- 300-1000 ohms If a pump is used to bring oil to a l...

Technician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? - ANSWER ☑☑Both A and B The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directional tires are rotated in a criss-cross pattern. Who is ri...

Truck Parts and Some Basic Knowledge with Complete Solutions What is the purpose of a truck’s power steering fluid? Power steering fluid helps the steering system operate smoothly and reduces the effort needed to turn the steering wheel. What does a truck’s air compressor do? The air compressor generates compressed air for the truck’s air brake system and other pneumatic components. How does a truck’s turbocharger improve engine performance? A turbocharger increases e...