Galvanized steel flashing - Study guides, Class notes & Summaries

Home Inspection Study set exam course questions with 100% correct answers 2024 Capillary tubes are part of the? - CORRECT ANSWER-evaporator coil Which is the most acceptable fastener for connecting a desk ledger to a band board? - CORRECT ANSWER-1/2 inch diameter hot-dipped galvanized steel machine bolt A sidewall extends past a roof. Hardboard siding is water damaged a few illes beyond where the roof and sidewall meet. The roof covering is asphalt strip shingles. What is the most li...

There is no gravel behind the wall. - answerA poured concrete retaining wall with weep holes is rotating. What is the most likely reason for the rotation? The gutters are blocked. - answerA poured concrete basement wall has a 1/4" wide crack where the wall is bowing slightly. Brown stains are below the crack. What is the most likely reason for this condition? The soil has settled at the foundation. - answerA concrete block basement wall has significant efflorescence. What is the most like...

According to the architectural sheet metal manual, what is the minimum thickness of a 4" x 6" plain rectangular copper downspout? - 16 Oz When using step or channel flashing where a tile roof area intersects a side wall, NRCA recommends extending the flashing a minimum of ______ up the wall. - 4" inch When installing EPDM waterproofing, lay the membrane on the substrate or flat surface and allow it to relax for a minimum of ______ before use - 30 minutes Which of the following is not...

What is not a step in lead paint safety? - Answer using a shopvac Each one gallon of water added to one yard of concrete will... - Answer Reduce the PSI strength by 150. A construction lien can be placed on? - Answer Residential, and Commercial property. Trench boxes are used.... - Answer to protect workers in deeper excavation. About how much does a yard of dirt weigh? - Answer 2000-3000 lbs The board shall consist of _____voting members, and ______ member's shall represent the ...

2024 VA HIC License Exam Prep Protruding objects may not protrude more than ___ inches into the path of travel. - ANS 4" ANSI Accessible and Usable Buildings and Facilities, 2017 Page 15 In new buildings, thresholds at doorways should be no higher than ______. - ANS 1/2" ANSI Accessible and Usable Buildings and Facilities, 2017 Page 30 In a Type A unit, if measuring to the highest part of the rim or highest part of the counter, what is the maximum h...

According to the architectural sheet metal manual, what is the minimum thickness of a 4" x 6" plain rectangular copper downspout? - 16 Oz When using step or channel flashing where a tile roof area intersects a side wall, NRCA recommends extending the flashing a minimum of ______ up the wall. - 4" inch When installing EPDM waterproofing, lay the membrane on the substrate or flat surface and allow it to relax for a minimum of ______ before use - 30 minutes Which of the following is not...

Home Inspector Exam Already Passed.

National Home Inspector Examination |exam study guide/questions and answers/5 stars ratingNational Home Inspector Examination |exam study guide/questions and answers/5 stars rating A poured concrete retaining wall with weep holes is rotating. What is the most likely reason for the rotation? - correct answers-There is no gravel behind the wall. A poured concrete basement wall has a 1/4" wide crack where the wall is bowing slightly. Brown stains are below the crack. What is the most likel...

State Farm Estimatics Exam Removal of shingles - correct answer estimate for the actual number of squares (not square feet). No estimating or rounding. Replacement of shingles - correct answer a) Include waste in the calculation -10% - Composite -15% - wood b) Round up to the nearest bundle -Assume 3 bundles per SQ for composite shingles -Assume 4 bundles per SQ for wood What do wood shingle estimates always end with? - correct answer fourths. .25, .5, .75, .00 What do comp...

Capillary tubes are part of the? - Answer- evaporator coil Which is the most acceptable fastener for connecting a desk ledger to a band board? - Answer- 1/2 inch diameter hot-dipped galvanized steel machine bolt A sidewall extends past a roof. Hardboard siding is water damaged a few illes beyond where the roof and sidewall meet. The roof covering is asphalt strip shingles. What is the most likely cause of this condition? - Answer- Kick out flashing was not installed A circuit breaker pr...