Nccer level 1 module 10 - Study guides, Class notes & Summaries

NCCER Welding Level 1 Module 2: Oxyfuel Cutting 1. What types of metals contain iron? - Ferrous metals are those that contain iron. 2. In what situation is oxyfuel cutting most effectively used? - Oxyfuel cutting is particularly well-suited for cutting ferrous metals. 3. What happens to metal when subjected to a high-pressure stream of cutting oxygen from an oxyfuel torch? - The metal is instantly oxidized. 4. What is the recommended tinting range for face shields or safety glass...

NCCER electrical Level 2 Module 2 Verified Guide 1. What voltage threshold requires guarding for exposed live parts? - Exposed live parts must be guarded if they operate at 50V or more between terminals. 2. Which type of equipment is most likely to utilize dynamic braking? - Forklifts often use dynamic braking. 3. At startup, what percentage of its full-load torque does a DC series motor generate? - A DC series motor develops 500% of its full-load torque at startup. 4. What factor ...

A cutaway view of a building or object is known as a(n)______. Sectional drawing What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast load of 150VA? 1,200VA In which division of the MasterFormat is electronic safety covered? Division 28 A section line on a drawing shows The location of the section on the plan On electrical drawings, a solid line with a solid circle at the end indicates wiring______. Turn do...

A cutaway view of a building or object is known as a(n)______. Sectional drawing What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast load of 150VA? 1,200VA In which division of the MasterFormat is electronic safety covered? Division 28 A section line on a drawing shows The location of the section on the plan On electrical drawings, a solid line with a solid circle at the end indicates wiring______. Turn do...

NCCER Industrial Maintenance E & I Technician Level 1 Module 1 1. What happens to machinery that is not properly maintained? It will eventually encounter breakdowns. ️ 2. What is the purpose of the National Center for Construction Education and Research (NCCER)? NCCER was established to provide standardized materials for construction education. ️ 3. What is the aim of NCCER's National Registry? The registry is designed to offer industry-wide credentials and ensure the por...

NCCER Module 1 Guaranteed Success 1. What are some benefits of maintaining safety in the workplace? Implementing safety practices leads to lower accident rates and reduced employee turnover. 2. What safety measure is required for arc welding? Gas welding and burning necessitate a filter lens of at least No. 4 shade for eye protection. 3. How can safety be characterized? Safety can be seen as both a learned behavior and a cultivated attitude. 4. What defines a safety culture w...

NCCER ELECTRICAL LEVEL 1 MODULE 11- RESIDENTAL WIRING QUESTIONS AND ANSWERS The minimum number of small appliance circuits required by the NEC® in a kitchen area is _____. ** 2 When sizing residential electrical services, the laundry load is calculated as _____. 1,500VA When sizing the general lighting load for electric services, the first 3,000VA is rated at _____. ** 100% According to NEC Section 220.53, a demand factor of 75% may be applied to four or more _____. Fixed appliance lo...

NCCER MODULE 1 SET 3 GRADED A+ 1. What defines a qualified person in the workplace? A qualified person possesses either a recognized degree, certification, or professional standing, or has demonstrated extensive knowledge, training, and experience, showing the ability to solve or prevent problems related to a specific subject or project. ️ 2. What function does a respirator serve? A respirator is a device designed to provide clean, filtered air for breathing, regardless of cont...