One circular mil is - Study guides, Class notes & Summaries

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 CM - ANSWER-6. A round bus-bar one inch in diameter, has a circular mil area of: four time...

Stationary Engineer Electric Exam Questions With Correct Answers Latest 2024/2025 (Graded A+) A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination is 30 amps. Under these conditions, the line voltage will be ____________ volts. - Answer 200 A 20-ohm resistor is connected in series with a parallel combination of two resistors, one of which is 10-ohms, the other 40-ohms. If the voltage across the parallel combination is 40 volts, ...

The electrical NCCER test Questions All Solved Correctly Which Article of the NEC covers grounding? - Answer -article 250 Which of the following is a 90 degree, explosion proof fitting? - Answer -GUAL What is a dropout plate? - Answer -Metal plate with a curved surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States EXCEPT: - Answer -372/575 3-PHASE, 4-WIRE What does a GFCI breaker do? - Answer -Opens a circuit t...

Rodeo Test Exam Questions With 100% Correct Answers When digging by hand you should outline the hole around the stake. The diameter of the hole should be at least ____ greater than the diameter of the butt of the pole. - answerD) 6 inches ____ polarity is standard for all single-phase distribution transformers 200 KVA and below having high-voltage ratings of 9,000 votls and below. - answerA) Additive What does the acronym ANSI stand for? - answerAmerican national standards institute When ...

Master Electrical REAL Exam Questions And Correct Answers | Verified Control the speed of the motor - ANSWER The purpose of having a rheostat in the field of a DC shunt motor is to ________. An ammeter, a wattmeter, and a voltmeter - ANSWER You are to check the power factor of a load, you cannot get a power factor meter, you would use__________. Lead sheath - ANSWER High voltage cable which is to be installed in underground ducts is generally protected with a __________. Lower watt...

Electrician NCCER Questions and Answers (Already Passed) Latest Updated 2024/2025 | Graded A+. What is a dropout plate? Metal plate with a curve surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States Except: 372/575 3- Phase, 4-wire What does a GFCI breaker do? Opens a circuit to prevent operation of an electrical device What will happen when one or more coils in a winding are grounded? The motor will automatically blow ...

Stationary Engineer Exam Questions and Answers Latest 2024/2025 (Graded) An AC circuit consists only of a pure inductance and a power source. The relationship between the voltage and the current in this circuit is that the - Answer current lags the voltage The power factor of a load is equal to the ____________ power divided by the ____________ power. - Answer True ; apparent A 10-ohms and 20-ohms resistor are connected in parallel. The total line current drawn by this parallel combination...

branch circuit - ANSWER-That portion of a wiring system extending beyond the final overcurrent device is called the: Calculated load - ANSWER-The final sum of the computed loads, based on the minimum code requirements, is the Resistance - ANSWER-As compared to #10, a #8 wire of the same Iength has less: 0.001 inch - ANSWER-One circular mil is the area of a circle whose diameter is: 1,000,000 cm - ANSWER-A round bus-bar one inch in diameter, has a circular mil area of: four times a...

Electrician NCCER Questions and Answers (Already Passed) Latest Updated 2024/2025 | Graded. Which article of the NEC covers grounding? Article 250 What is a dropout plate? Metal plate with a curve surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States Except: 372/575 3- Phase, 4-wire What does a GFCI breaker do? Opens a circuit to prevent operation of an electrical device What will happen when one or more coils in a win...

Which article of the NEC covers grounding? Article 250 What is a dropout plate? Metal plate with a curve surface for cable to follow as it passes from the tray All of the following are common service voltages in the United States Except: 372/575 3Phase, 4-wire What does a GFCI breaker do? Opens a circuit to prevent operation of an electrical device What will happen when one or more coils in a winding are grounded? The motor will automatically blow fuses eight incandesc...